PACE 2: Pricing and Cost Estimating Handbook

An automatic data processing system to be used for the preparation of industrial engineering type manhour and material cost estimates has been established. This computer system has evolved into a highly versatile and highly flexible tool which significantly reduces computation time, eliminates computational errors, and reduces typing and reproduction time for estimators and pricers since all mathematical and clerical functions are automatic once basic inputs are derived

Improved decision support for engine-in-the-loop experimental design optimization

Experimental optimization with hardware in the loop is a common procedure in engineering and has been the subject of intense development, particularly when it is applied to relatively complex combinatorial systems that are not completely understood, or where accurate modelling is not possible owing to the dimensions of the search space. A common source of difficulty arises because of the level of noise associated with experimental measurements, a combination of limited instrument precision, and extraneous factors. When a series of experiments is conducted to search for a combination of input parameters that results in a minimum or maximum response, under the imposition of noise, the underlying shape of the function being optimized can become very difficult to discern or even lost. A common methodology to support experimental search for optimal or suboptimal values is to use one of the many gradient descent methods. However, even sophisticated and proven methodologies, such as simulated annealing, can be significantly challenged in the presence of noise, since approximating the gradient at any point becomes highly unreliable. Often, experiments are accepted as a result of random noise which should be rejected, and vice versa. This is also true for other sampling techniques, including tabu and evolutionary algorithms. After the general introduction, this paper is divided into two main sections (sections 2 and 3), which are followed by the conclusion. Section 2 introduces a decision support methodology based upon response surfaces, which supplements experimental management based on a variable neighbourhood search and is shown to be highly effective in directing experiments in the presence of a significant signal-to-noise ratio and complex combinatorial functions. The methodology is developed on a three-dimensional surface with multiple local minima, a large basin of attraction, and a high signal-to-noise ratio. In section 2, the methodology is applied to an automotive combinatorial search in the laboratory, on a real-time engine-in-the-loop application. In this application, it is desired to find the maximum power output of an experimental single-cylinder spark ignition engine operating under a quasi-constant-volume operating regime. Under this regime, the piston is slowed at top dead centre to achieve combustion in close to constant volume conditions. As part of the further development of the engine to incorporate a linear generator to investigate free-piston operation, it is necessary to perform a series of experiments with combinatorial parameters. The objective is to identify the maximum power point in the least number of experiments in order to minimize costs. This test programme provides peak power data in order to achieve optimal electrical machine design. The decision support methodology is combined with standard optimization and search methods – namely gradient descent and simulated annealing – in order to study the reductions possible in experimental iterations. It is shown that the decision support methodology significantly reduces the number of experiments necessary to find the maximum power solution and thus offers a potentially significant cost saving to hardware-in-the-loop experi- mentation

Digital Signal Processing Education: Technology and Tradition

In this paper we discuss a DSP course presented to both University students and to participants on industrial short courses. The "traditional" DSP course will typically run over one to two semesters and usually cover the fundamental mathematics of z-, Laplace and Fourier transforms, followed by the algorithm and application detail. In the course we will discuss, the use of advanced DSP software and integrated support software allow the presentation time to be greatly shortened and more focussed algorithm and application learning to be introduced. By combining the traditional lecture with the use of advanced DSP software, all harnessed by the web, we report on the objectives, syllabus, and mode of teaching

PACE: Pricing And Cost Estimating handbook

The PACE (Pricing and Cost Estimating) system, its purpose, makeup, use, and capabilities are described

Support and power plant documentation for the gas turbine powered bus demonstration program

The operational experience obtained for the GT404-4 gas turbine engines in the intercity and intracity Bus Demonstration Programs is described for the period January 1980 through September 1981. Support for the engines and automatic transmissions involved in this program provided engineering and field service, spare parts and tools, training, and factory overhauls. the Greyhound (intercity) coaches accumulated 183,054 mi (294,595 km) and 5154 hr of total operation. The Baltimore Transit (intracity) coaches accumulated 40,567 mi (65,285 km) and 1840 hr of total operation. In service, the turbine powered Greyhound and Transit coaches achieved approximately 25% and 40% lower fuel mileage, respectively, than did the production diesel powered coaches. The gas turbine engine will require the advanced ceramic development currently being sponsored by the DOE and NASA to achieve fuel economy equivalent not only to that of today's diesel engines but also to the projected fuel economy of the advanced diesel engines of the 1990s. Sufficient experience was not achieved with the coaches prior to the start of service to identify and eliminate many of the problems associated with the startup of new equipment. Because of these problems, the mean miles between incident were unacceptably low. The future gas turbine system should be developed sufficiently to establish satisfactory durability prior to evaluation in revenue service. Commercialization of the gas turbine bus engine remains a viable goal for the future

The Marysville, Montana Geothermal Project

Drilling the first geothermal well in Montana presented many challenges, not only in securing materials and planning strategies for drilling the wildcat well but also in addressing the environmental, legal, and institutional issues raised by the request for permission to explore a resource which lacked legal definition. The Marysville Geothermal Project was to investigate a dry hot rock heat anomaly. The well was drilled to a total depth of 6790 feet and many fractured water bearing zones were encountered below 1800 feet

Running-mass models of inflation, and their observational constraints

If the inflaton sector is described by softly broken supersymmetry, and the inflaton has unsuppressed couplings, the inflaton mass will run strongly with scale. Four types of model are possible. The prediction for the spectral index involves two parameters, while the COBE normalization involves a third, all of them calculable functions of the relevant masses and couplings. A crude estimate is made of the region of parameter space allowed by present observation.Comment: Latex file, 20 pages, 11 figures, uses epsf.sty. Comment on the observation of the spectral index scale dependence added; Fig. 3-6 improve

Cost analysis of new and retrofit hot-air type solar assisted heating systems

A detailed cost analysis/cost improvement study was performed on two Department of Energy/National Aeronautics and Space Administration operational test sites to determine actual costs and potential cost improvements of new and retrofit hot air type, solar assisted heating and hot water systems for single family sized structures. This analysis concentrated on the first cost of a system which included procurement, installation, and integration of a solar assisted heating and hot water system on a new or retrofit basis; it also provided several cost projections which can be used as inputs to payback analyses, depending upon the degree of optimism or future improvements assumed. Cost definitions were developed for five categories of cost, and preliminary estimates were developed for each. The costing methodology, approach, and results together with several candidate low cost designs are described

Microbially-mediated chromate reduction in highly alkaline groundwater systems

Chromium ore processing residue (COPR) has been deposited at a site in the North of England, probably at the end of the nineteenth century. The site covers an area of approximately 2.2 ha, and is situated between a canal and a river that are about 150m apart. It is in a glacial valley underlain by millstone grit and in-filled with alluvial deposits (silt, clay and sand). The original surface deposit is a thin layer of sandy clay that was probably deposited during over-bank flow of the river. COPR has been tipped onto the hillside between the river and canal (which is ~7m above the river), possibly to support the canal bank. At some time in the past top-soil has been placed over the COPR, and the site is now covered with grass. Ground level on the tip is about 1.5m higher than the canal towpath. Currently the site is a cause for environmental concern because groundwater emerging from the waste is alkaline, visibly yellow and has an elevated Cr(VI) concentration. This paper reports an investigation into the possible fate of any Cr(VI) that migrates downwards from the waste into the underlying soils. Sandy clay from immediately beneath the waste (assumed to be the topsoil layer prior to waste tipping) contains 30-70% acid extractable iron as reduced Fe(II), and between about 3,000 and 600 mg.kg 1 of Cr decreasing with depth. DNA fragments from soil bacteria were extracted from this soil, and microcosm experiments with this soil where the pH was reduced showed that it contains a viable bacterial population capable of iron-reduction. This sandy clay layer, despite a pH value of 10.5, appears to be acting as a natural reactive zone beneath the waste as it is accumulating chromium. It is thought that the mechanism of Cr(VI) reduction is most likely to be an abiotic reaction with the Fe(II) present in the soil, and that Fe(II) in the soil is being replenished by microbial iron reduction (albeit probably at a slow rate)

Solid state image sensor research, phase I

Solid state image sensor in infrared and visible region