Rechnerische Bestimmung der lonenbeweglichkeit in Ziegelstein unter Zuhilfenahme von Ergebnissen aus nichtstationären Diffusionsversuchen

Ion concentration profiles in sandwich-brick specimens have been determined experimentally at different degrees of water saturation. Based on the experimental data, ion diffusion coefficients were determined by inverse analysis. The diffusion equation served as a basis for an optimization technique. It has been shown that the ion diffusivity in bricks decreases markedly as the moisture content decreases. The interface between two adjacent bricks slows down the ion migration at low water content in particular. It is planed to investigate the interface between mortar and bricks in further experimental and numerical studie

Evaluation of UHPFRC activation energy using empirical models

The influence of thermal curing on the evolution of the material properties and the UHPFRC behaviour was investigated. Tests results showed a beneficial effect of a high temperature curing on the early age material properties due to the thermo-activation effect on the hydration process. However, an inverse effect was observed at long-term. In our study, activation energy of UHPFRC was evaluated from experimental data by means of empirical models. The traditional maturity-function based on Arrhenius law, generally used to describe thermally activated physical or chemical processes, was used to predict the evolution of the UHPFRC autogenous shrinkage and to validate the applicability of this concept for such cement-based materials. Results showed that the concept based on Arrhenius law could describe correctly temperature effects on UHPFRC for temperature lower than 30°

UHPFRC tensile creep at early age

Ultra high performance fibre reinforced concrete (UHPFRC) early age viscoelastic behaviour under tension was investigated. The tests results showed a high creep potential due to the high volume paste (88%). This result is of major importance because the viscoelastic properties contribute to mitigating the high early age stresses generated under restrained shrinkage. This beneficial effect was reflected by the increased linear-relationship between tensile creep and shrinkage. As expected, UHPFRC tensile creep behaviour was also sensitive to the loading level. Above 35% of the tensile strength at the loading age, the material exhibited viscoplastic behaviour. A Maxwell chain model was applied to predict the early age UHPFRC tensile creep and confirms the induced non-linear respons

Inverse estimation of the permeability of porous materials using experimental data via reflected waves at low frequencies

International audienceAn acoustic reflectivity method is proposed for measuring the permeability or flow resistivity of air-saturated porous materials. In this method, a simplified expression of the reflection coefficient is derived in the Darcy's regime (low frequency range), which does not depend on frequency and porosity. Numerical simulations show that the reflection coefficient of a porous material can be approximated by its simplified expression obtained from its Taylor development to the first order. This approximation is good especially for resistive materials (of low permeability) and for the lower frequencies. The permeability is reconstructed by solving the inverse problem using waves reflected by plastic foam samples, at different frequency bandwidths in the Darcy regime. The proposed method has the advantage of being simple compared to the conventional methods that use experimental reflected data, and is complementary to the transmissivity method which is more adapted to low resistive materials (high permeability)

Measuring static viscous permeability of porous absorbing materials

International audienceConventional acoustical methods for measuring the permeability or flow resistivity of a porous material require a priori estimation of the porosity. In this work, an acoustical method is presented in which a simplified expression (independent of both the frequency and porosity) for the transmitted waves at the Darcy’s regime (low frequency range) is derived, and used for the inverse determination of both the viscous static permeability (or flow resistivity) and the thickness of air-saturated porous materials. The inverse problem is solved based on the least-square numerical method using transmitted waves in time domain. Tests are performed using industrial plastic foams. Experimental and numerical validation results of this method are presented, which show theadvantage of measuring the viscous permeability and thickness of a porous slab, without the required prior knowledge of the porosity, but by simply using the transmitted waves

A hybrid multi-objective algorithm to predict the characteristics of soil profiles from seismic ground motion records

The underlying goal of this study is to present an efficient algorithm to identify soil parameters such as thicknesses, shear wave velocities, damping and others parameters of subsurface layers, and site amplification characteristics (natural frequencies, peak amplitudes) from a given pair of seismic records. It is a hybrid procedure combining the stochastic genetic algorithms (GAs) optimization method, to find a point close to the global optimum in the global search phase, and a gradient based local determinist method (Levenberg-Marquardt: LM), to refine the solution. To improve the performance of the global search phase, a multi-objective optimization algorithm is used to minimize the errors between some characteristics of the theoretical amplification function and the experimental one of vertical array records. The weighted sum method which combines the weighted objectives into a single objective function is used to solve the optimization problem. The efficiency of the present algorithm is proven by several examples. Results show that the scheme works well and the curve fitting was always satisfying. Also, the proposed procedure leads to good approximations, requiring a lower computational effort, yet with good rates of convergence. Moreover, neither the growing number of parameters nor the vastness of the search space reduces the efficiency of the algorithm in predicting the characteristics of soil profiles and site amplification commonly required in seismic risk mitigation

Search for CP Violation in the Decay Z -> b (b bar) g

About three million hadronic decays of the Z collected by ALEPH in the years 1991-1994 are used to search for anomalous CP violation beyond the Standard Model in the decay Z -> b \bar{b} g. The study is performed by analyzing angular correlations between the two quarks and the gluon in three-jet events and by measuring the differential two-jet rate. No signal of CP violation is found. For the combinations of anomalous CP violating couplings, ${\hat{h}}_b = {\hat{h}}_{Ab}g_{Vb}-{\hat{h}}_{Vb}g_{Ab}$ and $h^{\ast}_b = \sqrt{\hat{h}_{Vb}^{2}+\hat{h}_{Ab}^{2}}$, limits of \hat{h}_b < 0.59$and$h^{\ast}_{b} < 3.02$ are given at 95\% CL.Comment: 8 pages, 1 postscript figure, uses here.sty, epsfig.st

Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

A new method is presented for the measurement of the mean $\tau$ lepton lifetime using events in which $\tau$'s are pair-produced and both $\tau$'s decay to hadrons and $\nu_\tau$. Based on the correlation between the two $\tau$'s produced at a symmetric $e^+ e^-$ collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the $\tau$ decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a $\tau$ lifetime of $288.0 \pm 3.1 \pm 1.3$\fs is obtained from the sample in which both $\tau$'s decay to one charged track, and $292.8 \pm 5.6 \pm 3.0$\fs from the sample in which one $\tau$ decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting $\tau$ lifetime is $291.2 \pm 2.0 \pm 1.2$\fs

Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

A new method is presented for the measurement of the mean $\tau$ lepton lifetime using events in which $\tau$'s are pair-produced and both $\tau$'s decay to hadrons and $\nu_\tau$. Based on the correlation between the two $\tau$'s produced at a symmetric $e^+ e^-$ collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the $\tau$ decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a $\tau$ lifetime of $288.0 \pm 3.1 \pm 1.3$\fs is obtained from the sample in which both $\tau$'s decay to one charged track, and $292.8 \pm 5.6 \pm 3.0$\fs from the sample in which one $\tau$ decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting $\tau$ lifetime is $291.2 \pm 2.0 \pm 1.2$\fs

Charm counting in b decays

The inclusive production of charmed particles in Z--&gt; decays has been measured from the yield of D-0, D+, D-s(+) and Lambda(c)(+) decays in a sample of events with high b purity collected with the ALEPH detector from 1992 to 1995. From these measurements, adding the charmonia production rate and an estimate of the charmed strange baryon contribution, the average number of charm quarks per b decay is determined to be n(c)=1.230+/-0.036+/-0.038+/-0.053, where the uncertainties are due to statistics, systematic effects and branching ratios, respectively