Cryogenic Mechanical Alloying of Poly (ether ether ketone) - Polycarbonate Composite Powders for Selective Laser Sintering

Mechanical alloying is a solid state processing technique traditionally used in the metallurgical industry to extend solubility limits in alloy systems. Mechanical alloying can also be used to blend polymer systems at ambient or cryogenic temperatures. In this work, cryogenic mechanical alloying was employed to create composite powders of Poly (ether ether ketone) (PEEK) - Polycarbonate (PC) for use in selective laser sintering applications. The microstructural development of the PEEK-PC system that occurs during laser sintering and the effects of this microstructure on mechanical properties of the laser sintered parts was investigated.Mechanical Engineerin

Stochastic Transition Model for Discrete Agent Movements

We propose a calibrated two-dimensional cellular automaton model to simulate pedestrian motion behavior. It is a v=4 (3) model with exclusion statistics and random shuffled dynamics. The underlying regular grid structure results in a direction-dependent behavior, which has in particular not been considered within previous approaches. We efficiently compensate these grid-caused deficiencies on model level.Comment: 8 pages, 4 figure

Insights into antibody catalysis: Structure of an oxygenation catalyst at 1.9-Å resolution

The x-ray crystal structures of the sulfide oxidase antibody 28B4 and of antibody 28B4 complexed with hapten have been solved at 2.2-Å and 1.9-Å resolution, respectively. To our knowledge, these structures are the highest resolution catalytic antibody structures to date and provide insight into the molecular mechanism of this antibody-catalyzed monooxygenation reaction. Specifically, the data suggest that entropic restriction plays a fundamental role in catalysis through the precise alignment of the thioether substrate and oxidant. The antibody active site also stabilizes developing charge on both sulfur and periodate in the transition state via cation-pi and electrostatic interactions, respectively. In addition to demonstrating that the active site of antibody 28B4 does indeed reflect the mechanistic information programmed in the aminophosphonic acid hapten, these high-resolution structures provide a basis for enhancing turnover rates through mutagenesis and improved hapten design

The Effects of JIT on the Development of Productivity Norms

Low inventory, or just-in-time (JIT) manufacturing systems, enjoy increasing application worldwide, yet the behavioral effects of such systems remain largely unexplored. Operations Research (OR) models of low inventory systems typically make a simplifying assumption that individual worker processing times are independent random variables. This leads to predictions that low-inventory systems will exhibit production interruptions. Yet empirical results suggest that low-inventory systems do not exhibit the predicted productivity losses. This paper develops a model integrating feedback, goal-setting, group cohesiveness, task norms, and peer pressure to predict how individual behavior may adjust to alleviate production interruptions in low-inventory systems. In doing so we integrate previous research on the development of task norms. Findings suggest that low-inventory systems induce individual and group responses that cause behavioral changes that mitigate production interruptions

A variable-geometry combustor used to study primary and secondary zone stoichiometry

A combustion program is underway to evaluate fuel quality effects on gas turbine combustors. A rich-lean variable geometry combustor design was chosen to evaluate fuel quality effects over a wide range of primary and secondary zone equivalence ratios at simulated engine operating conditions. The first task of this effort, was to evaluate the performance of the variable geometry combustor. The combustor incorporates three stations of variable geometry to control primary and secondary zone equivalence ratio and overall pressure loss. Geometry changes could be made while a test was in progress through the use of remote control actuators. The primary zone liner was water cooled to eliminate the concern of liner durability. Emissions and performance data were obtained at simulated engine conditions of 80 percent and full power. Inlet air temperature varied from 611 to 665K, inlet total pressure varied from 1.02 to 1.24 MPa, reference velocity was a constant 1400 K

The design of linear multivariable control systems using modern control theory /with applications to coupled core reactor control/

Linear multivariable control system design using modern control theory, and application to coupled core reactor contro

Ocean shrimp report 1979 season

Statewide Pacific ocean shrimp, Pandalus jordani, landings totaled 2,237.7 mt (4,922,857 lb), down 3,745 mt (8,240,386 lb) from the 1978 catch of 5,983.3 mt (13,163,243 lb). The 1979 landings are the lowest since 1976 when 1,545.5 mt (3,400,191 lb) were landed. Area A (Eureka-Crescent City)landings dropped to 1,842.5 mt (4,053,605 lb) from 5,046.3 mt (11,101,895 lb) landed during the previous season. No landings were made in Area B-1 (Fort Bragg). Only 2.0 mt (4,385 lb) were reported caught in Area B-2 (Bodega Bay). Record landings of 393.1 mt (864,867 lb) were made in Area C (Morro Bay-Avila), surpassing the previous record of 90.4 mt (199,000 lb) landed in 1953. In Area A a record 71 vessels, 34 double-rigged and 37 single-rigged, shrimped during the season. Average catch per hour was a low .15 mt (338 lb) and .22 mt (490 1b) for single-rig and double-rig vessels, respectively. In Area C average catch per hour was .23 mt (508 lb) and .42 mt (924 lb) for single-rig and double-rig vessels, respectively. Area A shrimp catches were dominated by 1-year-old shrimp throughout most of the season. The age composition in Area C shifted predominately from 2-year-old shrimp in May and June to predominately 1-year-old shrimp in July, August, October, and November. Area A was closed for one month from July 15 to August 15 because closure criteria of less than .16 mt (350 lb) per hour for two consecutive weeks was met and year class composition exceeded 70% of 1-year-old shrimp. The season was closed October 14 when the catch per hour criterion was exceeded again. (18pp.