Estimating duster compactness in Yaghouti grapes

Cluster compactness of Yaghouti grapes was defined and measured as the percentage of the total volume occupied by the solid volume. The total volume is the solid volume plus the space between the berries. This measure of compactness was used to judge the suitability of other means of estimating compactness. It is concluded that the ratio of the solid volume to the total length of the rachis plus that of its primary laterals is the most suitable estimator of compactness.Beurteilung der Beerendichte bei der Rebsorte JagboutiDie Beerendichte der Jaghouti-Trauben wurde als der prozentuale Anteil des Festvolumens am Gesamtvolumen der Traube definiert und gemessen. Das Gesamtvolumen ist das Festvolumen (Beeren mit Traubengerüst) und der Zwischenraum zwischen den Weinbeeren. Dieses Maß der Beerendichte wurde dazu verwendet, um die Brauchbarkeit anderer Methoden zur Schätzung der Beerendichte zu beurteilen. Es wurde festgestellt, daß sich der Quotient aus Festvolumen und Gesamtlänge der Traubenachse und der Seitenäste 1. Ordnung für die Schätzung der Beerendichte am besten eignet

A study of intergrowth textures and their possible origins in the Alvand plutonic complex, Hamadan, Iran

Various types of intergrowth textures occur in the Alvand plutonic complex, Hamadan, Iran. Intergrowth textures, such as myrmekite, perthite, micrographic (± granophyric), and tourmaline-microcline intergrowth, are most common in this suite. Perthite and micrographic textures show characteristics of magmatic origin, but myrmekite and tourmaline-microcline intergrowth probably have metasomatic origin. In diorites, myrmekite was possibly generated by Ca-metasomatism, but in granodiorites and granites, it may have formed by both K- and Ca-metasomatism. The presence of anti-rapakivi texture (K-feldspar overgrowth on plagioclase) in the same rocks may be related to this process, too.Myrmekite and Metasomatic Granite 42. (2002)1526-575

Effect of Adding an Organic Binder on Health of Cows Fed with Mycotoxins Contaminated Diet

Mycotoxins contamination occurring in dairy cow's diet is responsible for devastating effects on livestock health. Among different strategies, using organic adsorbents is a promising approach to reduce the toxicity of mycotoxins. This study investigated the effects of an organic adsorbent containing Lactobacillus brevis TD4, Lactobacillus paracasei TD3, and Saccharomyces cerevisiae cell wall on milk production, somatic cell count, blood parameters (white blood cell [WBC], lymphocyte [LYM], neutrophil, basophil, monocyte, eosinophil, red blood cell, haemoglobin, haematocrit, mean corpuscular volume, mean corpuscular haemoglobin) and liver function (alanine transaminase [ALT], gamma-glutamyl transferase [GGT], aspartate transaminase [AST], alkaline phosphatase [ALP], urea, total protein, albumin) in dairy cows fed a naturally contaminated diet with Zearalenone and Deoxynivalenol. The amounts of mycotoxins Zearalenone (ZEA) and Deoxynivalenol (DON) in feed ingredients were measured using the HPLC method. Ten Holstein dairy cows received organic adsorbents daily in their diets for four weeks. Milk and blood samples were taken from cows before the start of feeding adsorbent (CTRL), during the feeding period (FP), and one week after removal of adsorbent from the diet (RP). Totally, the amount of measured ZEA and DON toxins in the diet were 389 and 1254.6 ppb, respectively. Feeding of organic adsorbent significantly increased milk production, total serum protein, and albumin compared to CTRL (P<0.01). Also, numerically lower somatic cell count in their milk and a significant decrease (P<0.01) in serum urea were resulted. Among examined blood parameters, the number of WBC and LYM significantly decreased (P<0.01) after feeding with the organic binder in comparison to the control period. Furthermore, except for a significant increase in the level of AST (P<0.05), the other liver function examined parameters were not affected. The consumption of feed containing low-cost organic adsorbent including Lactobacillus bacteria and yeast cell wall can improve the physical condition and health of dairy cows and reduce economic losses in livestock production

Resolving solitary osteolytic lumbar tuberculosis in young adult.

Lumbar vertebral tuberculosis presenting with a focal solitary osteolytic lesion is rare in spinal tuberculosis (TB) and the English literature describing this entity is scant. The differential diagnosis includes primary and secondary malignancies. In this report, we describe a case of 35-year-old woman who presented with low back pain and was found to have a focal L4 vertebral lytic lesion on MRI and CT. Whole body CT was carried out as a potential malignancy staging procedure and demonstrated lung lesions suggestive of TB. Her neurological and general examination were entirely normal. Her blood test was positive for QuantiFERON Gold. She was managed conservatively with anti-TB medications and serial imaging which showed evidence of resolution of the osteolytic lesion. Although it is unusual for TB to present as an isolated osteolytic vertebral body lesion, the possibility should always be considered in the differential diagnosis, along with neoplastic processes. Conservative medical management, in the absence of neurological deficits and deformity, is the main stay of management with a very good outlook

Isolation, identification and characterization of new luminous bacteria from Chah Bahar Port, southern marine habitat of Iran

Coastal region of Chah Bahar port, Sea of Oman, was screened for the presence of bioluminescence bacteria for the first time. Water samples were taken from surface and subsurface layers and immediately spread on nutrient seawater complete (SWC) agar. Luminous colonies were observed after an overnight incubation at 25°C. Among twenty luminous isolates, four of them were selected for preliminary bacterial identification based on morphological and physiological characteristics. 16S rRNA genes of selected bacteria were then sequenced in order to be submitted in GenBank database as new strains and performing phylogenetic analysis. Four different submitted bacterial strains are as follow, Vibrio sp. Persian 1, Vibrio sp. Persian 2, Vibrio sp. Persian 3, and Vibrio sp. Persian 4 with accession numbers of KC505639, KC765088, KC765089, and KC896417, respectively. Light emission of isolated luminous bacteria was measured using luminometer. Vibrio sp. Persian 1 was found as the best light emitter with counts per second/OD 600 nm equal to 10 × 10^6 RLU/Sec/OD. Isolated Vibrio species were tested for their ability to form biofilm. Vibrio sp. Persian 3 showed weak ability to produce biofilm while other species were considered as moderate biofilm producers

Isolation and identification of halophilic bacteria from Urmia Lake in Iran

Halophiles are in all three domains of life: Archaea, Bacteria and Eucarya. Halophilic microorganisms in addition to forming a major part of life biodiversity can have many biotechnological applications. The objective of this research is isolation and identification of halophilic bacteria from Urmia Lake in Iran and the study of its bacterial biodiversity. After sampling of brines from Urmia Lake from 10 stations and depth of approximately 30-50 cm, in April 2011 and transfer to the laboratory in the sterile conditions, samples were enriched and cultured on defined media, and incubated. After appearance of colonies, selected strains were studied based on morphology, physiology and biochemical characteristics. For phylogenetic identification, their genomic DNA were extracted and amplified by PCR technique. Therefore their sequences were determined by genetic experiment based on 16S rRNA gene sequence and their similarity were analysed in GenBank of EzTaxon database. Finally the phylogenetic tree was constructed. Studied strains belonged to three genera: Halomonas 50% (including H. andesensis LC6(T) [12.5%], H. gomseomensis M12(T) [12.5%], H. hydrothermalis Slthf2(T) [12.5%], H. boliviensis LC1(T) [6.25%] and H. janggokensis M24(T) [6.25%]), Salinivibrio 25% (including S. costicola subsp. alcaliphilus DSM 16359(T) [18.75%] and S. sharmensis BAG(T) [6.25%]) and Idiomarina 25% (including I. loihiensis L2TR(T) [25%])

AutoMap is a high performance homozygosity mapping tool using next-generation sequencing data.

Homozygosity mapping is a powerful method for identifying mutations in patients with recessive conditions, especially in consanguineous families or isolated populations. Historically, it has been used in conjunction with genotypes from highly polymorphic markers, such as DNA microsatellites or common SNPs. Traditional software performs rather poorly with data from Whole Exome Sequencing (WES) and Whole Genome Sequencing (WGS), which are now extensively used in medical genetics. We develop AutoMap, a tool that is both web-based or downloadable, to allow performing homozygosity mapping directly on VCF (Variant Call Format) calls from WES or WGS projects. Following a training step on WES data from 26 consanguineous families and a validation procedure on a matched cohort, our method shows higher overall performances when compared with eight existing tools. Most importantly, when tested on real cases with negative molecular diagnosis from an internal set, AutoMap detects three gene-disease and multiple variant-disease associations that were previously unrecognized, projecting clear benefits for both molecular diagnosis and research activities in medical genetics

The effect of aneurysm geometry on the intra-aneurysmal flow condition

Various anatomical parameters affect on intra-aneurysmal hemodynamics. Nevertheless, how the shapes of real patient aneurysms affect on their intra-aneurysmal hemodynamics remains unanswered. Quantitative computational fluid dynamics simulation was conducted using eight patients’ angiograms of internal carotid artery–ophthalmic artery aneurysms. The mean size of the intracranial aneurysms was 11.5 mm (range 5.8 to 19.9 mm). Intra-aneurysmal blood flow velocity and wall shear stress (WSS) were collected from three measurement planes in each aneurysm dome. The correlation coefficients (r) were obtained between hemodynamic values (flow velocity and WSS) and the following anatomical parameters: averaged dimension of aneurysm dome, the largest aneurysm dome dimension, aspect ratio, and dome–neck ratio. Negative linear correlations were observed between the averaged dimension of aneurysm dome and intra-aneurysmal flow velocity (r = −0.735) and also WSS (r = −0.736). The largest dome diameter showed a negative correlation with intra-aneurysmal flow velocity (r = −0.731) and WSS (r = −0.496). The aspect ratio demonstrated a weak negative correlation with the intra-aneurysmal flow velocity (r = −0.381) and WSS (r = −0.501). A clear negative correlation was seen between the intra-aneurysmal flow velocity and the dome–neck ratio (r = −0.708). A weak negative correlation is observed between the intra-aneurysmal WSS and the dome–neck ratio (r = −0.392). The aneurysm dome size showed a negative linear correlation with intra-aneurysmal flow velocity and WSS. Wide-necked aneurysm geometry was associated with faster intra-aneurysmal flow velocity

Turbulent Natural Convection in Partitioned Square Cavities with Different Lengths and Positions

The effect of partition on turbulent natural convection has been investigated numerically with different lengths and positions in an air filled square cavity. The top wall of the cavity is assumed to be cold and the other three walls are hot. Two-dimensional governing equations based on Reynolds-averaged Navier-Stokes equations are solved numerically by control volume method in a staggered grid manner. The iterative SIMPLE algorithm is also used to solve the discretized momentum equations to compute the intermediate velocity and pressure fields linked through the momentum equations. The hybrid differencing scheme which is based on a combination of central and upwind schemes is employed to discretize the convective and diffusion terms of the equations respectively. To describe the structure of turbulent flow which is changed due to the increasing importance of viscous effects, wall function was applied to simulate the turbulent flow. The results show that when the partition is placed on the top or bottom wall, the heat transfer rate through the bottom wall increases by increasing the partition length. The number of vortices established in the cavity depends on the partition length. Furthermore, when the partition is mounted on the left or right wall, only a small part of the top wall has a direct interaction with the left wall and the rest of that has an indirect interaction with the bottom wall.</jats:p