New Photodetection Method Using Unbalanced Sidebands for Squeezed Quantum Noise in Gravitational Wave Interferometer

Homodyne detection is one of the ways to circumvent the standard quantum limit for a gravitational wave detector. In this paper it will be shown that the same quantum-non-demolition effect using homodyne detection can be realized by heterodyne detection with unbalanced RF sidebands. Furthermore, a broadband quantum-non-demolition readout scheme can also be realized by the unbalanced sideband detection.Comment: 9 pages, 5 figure

Accurate strain measurements in highly strained Ge microbridges

Ge under high strain is predicted to become a direct bandgap semiconductor. Very large deformations can be introduced using microbridge devices. However, at the microscale, strain values are commonly deduced from Raman spectroscopy using empirical linear models only established up to 1.2% for uniaxial stress. In this work, we calibrate the Raman-strain relation at higher strain using synchrotron based microdiffraction. The Ge microbridges show unprecedented high tensile strain up to 4.9 % corresponding to an unexpected 9.9 cm-1 Raman shift. We demonstrate experimentally and theoretically that the Raman strain relation is not linear and we provide a more accurate expression.Comment: 10 pages, 4 figure

Isospin-breaking corrections in the pion-deuteron scattering length

It is shown that isospin-breaking corrections to the pion-deuteron scattering length can be very large, because of the vanishing of the isospin-symmetric contribution to this scattering length at leading order in chiral perturbation theory. We further demonstrate that these corrections can explain the bulk of the discrepancy between the recent experimental data on pionic hydrogen and pionic deuterium. We also give the first determination of the electromagnetic low-energy constant f1.Comment: 4 pages, 1 postscript figure, uses REVTEX styl

Performance of a 1200m long suspended Fabry-Perot cavity

Using one arm of the Michelson interferometer and the power recycling mirror of the interferometric gravitational wave detector GEO600, we created a Fabry-Perot cavity with a length of 1200 m. The main purpose of this experiment was to gather first experience with the main optics, its suspensions and the corresponding control systems. The residual displacement of a main mirror is about 150 nm rms. By stabilising the length of the 1200 m long cavity to the pre-stabilised laser beam we achieved an error point frequency noise of 0.1 mHz/sqrt(Hz) at 100 Hz Fourier frequency. In addition we demonstrated the reliable performance of all included subsystems by several 10-hour-periods of continuous stable operation. Thus the full frequency stabilisation scheme for GEO600 was successfully tested.Comment: Amaldi 4 (Perth 2001) conference proceedings, 10 pages, 8 figure

Hadronic Atoms and Effective Interactions

We examine the problem of hadronic atom energy shifts using the technique of effective interactions and demonstrate equivalence with the conventional quantum mechanical approach.Comment: 22 page latex file with 2 figure

Robust vetoes for gravitational-wave burst triggers using known instrumental couplings

The search for signatures of transient, unmodelled gravitational-wave (GW) bursts in the data of ground-based interferometric detectors typically uses `excess-power' search methods. One of the most challenging problems in the burst-data-analysis is to distinguish between actual GW bursts and spurious noise transients that trigger the detection algorithms. In this paper, we present a unique and robust strategy to `veto' the instrumental glitches. This method makes use of the phenomenological understanding of the coupling of different detector sub-systems to the main detector output. The main idea behind this method is that the noise at the detector output (channel H) can be projected into two orthogonal directions in the Fourier space -- along, and orthogonal to, the direction in which the noise in an instrumental channel X would couple into H. If a noise transient in the detector output originates from channel X, it leaves the statistics of the noise-component of H orthogonal to X unchanged, which can be verified by a statistical hypothesis testing. This strategy is demonstrated by doing software injections in simulated Gaussian noise. We also formulate a less-rigorous, but computationally inexpensive alternative to the above method. Here, the parameters of the triggers in channel X are compared to the parameters of the triggers in channel H to see whether a trigger in channel H can be `explained' by a trigger in channel X and the measured transfer function.Comment: 14 Pages, 8 Figures, To appear in Class. Quantum Gra

Adaptive thermal compensation of test masses in advanced LIGO

As the first generation of laser interferometric gravitational wave detectors near operation, research and development has begun on increasing the instrument's sensitivity while utilizing the existing infrastructure. In the Laser Interferometer Gravitational Wave Observatory (LIGO), significant improvements are being planned for installation in ~2007, increasing strain sensitivity through improved suspensions and test mass substrates, active seismic isolation, and higher input laser power. Even with the highest quality optics available today, however, finite absorption of laser power within transmissive optics, coupled with the tremendous amount of optical power circulating in various parts of the interferometer, result in critical wavefront deformations which would cripple the performance of the instrument. Discussed is a method of active wavefront correction via direct thermal actuation on optical elements of the interferometer. A simple nichrome heating element suspended off the face of an affected optic will, through radiative heating, remove the gross axisymmetric part of the original thermal distortion. A scanning heating laser will then be used to remove any remaining non-axisymmetric wavefront distortion, generated by inhomogeneities in the substrate's absorption, thermal conductivity, etc. A proof-of-principle experiment has been constructed at MIT, selected data of which are presented.Comment: 11 pages, 7 figures, submitted to Classical and Quantum Gravit

Triple Michelson Interferometer for a Third-Generation Gravitational Wave Detector

The upcoming European design study `Einstein gravitational-wave Telescope' represents the first step towards a substantial, international effort for the design of a third-generation interferometric gravitational wave detector. It is generally believed that third-generation instruments might not be installed into existing infrastructures but will provoke a new search for optimal detector sites. Consequently, the detector design could be subject to fewer constraints than the on-going design of the second generation instruments. In particular, it will be prudent to investigate alternatives to the traditional L-shaped Michelson interferometer. In this article, we review an old proposal to use three Michelson interferometers in a triangular configuration. We use this example of a triple Michelson interferometer to clarify the terminology and will put this idea into the context of more recent research on interferometer technologies. Furthermore the benefits of a triangular detector will be used to motivate this design as a good starting point for a more detailed research effort towards a third-generation gravitational wave detector.Comment: Minor corrections to the main text and two additional appendices. 14 pages, 6 figure

Status of the joint LIGO--TAMA300 inspiral analysis

We present the status of the joint search for gravitational waves from inspiraling neutron star binaries in the LIGO Science Run 2 and TAMA300 Data Taking Run 8 data, which was taken from February 14 to April 14, 2003, by the LIGO and TAMA collaborations. In this paper we discuss what has been learned from an analysis of a subset of the data sample reserved as a ``playground''. We determine the coincidence conditions for parameters such as the coalescence time and chirp mass by injecting simulated Galactic binary neutron star signals into the data stream. We select coincidence conditions so as to maximize our efficiency of detecting simulated signals. We obtain an efficiency for our coincident search of 78 %, and show that we are missing primarily very distant signals for TAMA300. We perform a time slide analysis to estimate the background due to accidental coincidence of noise triggers. We find that the background triggers have a very different character from the triggers of simulated signals.Comment: 10 page, 8 figures, accepted for publication in Classical and Quantum Gravity for the special issue of the GWDAW9 Proceedings ; Corrected typos, minor change