Optimal sizing of C-type passive filters under non-sinusoidal conditions

In the literature, much attention has been focused on power system harmonics. One of its important effects is degradation of the load power factor. In this article, a C-type filter is used for reducing harmonic distortion, improving system performance, and compensating reactive power in order to improve the load power factor while taking into account economic considerations. Optimal sizing of the C-type filter parameters based on maximization of the load power factor as an objective function is determined. The total installation cost of the C-type filter and that of the conventional shunt (single-tuned) passive filter are comparatively evaluated. Background voltage and load current harmonics are taken into account. Recommendations defined in IEEE standards 519-1992 and 18-2002 are taken as the main constraints in this study. The presented design is tested using four numerical cases taken from previous publications, and the proposed filter results are compared with those of other published techniques. The results validate that the performance of the C-type passive filter as a low-pass filter is acceptable, especially in the case of lower short-circuit capacity systems. The C-type filter may achieve the same power factor with a lower total installation cost than a single-tuned passive filter

Refinement of Techniques Metallographic Analysis of Highly Dispersed Structures

Flaws are regularly made while developing standards and technical specifications. They can come out as minor misprints, as an insufficient description of a technique. In spite the fact that the flaws are well known, it does not come to the stage of introducing changes to standards. In this paper shows that in the normative documents is necessary to clarify the requirements for metallurgical microscopes, which are used for analysis of finely-dispersed

A new method to predict optimum cure time of rubber compound using dynamic mechanical analysis

The degree of vulcanization of a rubber compound has a big influence on the properties of the final product. Therefore, precisely defining the curing process including optimum cure time is important to ensure the production of final products having high performance. Typically, vulcanization is represented using vulcanization curves. The main types of equipment used for producing vulcanization curves are the oscillating disc rheometer (ODR) and the moving die rheometer (MDR). These can be used to plot graphs of torque versus time at a constant temperature to show how cure is proceeding. Based on the results obtained, optimum cure time (t₉₀) is calculated as the time required for the torque to reach 90% of the maximum achievable torque. In this study, the use of Dynamic Mechanical Analysis (DMA) for assessment of t₉₀ was assessed. DMA was carried out using shear mode isothermal tests to measure the changes in material properties caused by vulcanization. The results revealed that the shear storage modulus (G′), shear loss modulus (G′′), and tan δ all reflect the vulcanization process, however, tan δ gave the best representation of level of vulcanization. Indeed, the curve of tan δ was able to be used to derive the t₉₀ for rubber compounds and showed good agreement with the results from an MDR

Receipt from Standard Underground Cable Co.

https://digitalcommons.salve.edu/goelet-new-york/1220/thumbnail.jp

Invoice from Standard Underground Cable Co.

https://digitalcommons.salve.edu/goelet-new-york/1212/thumbnail.jp

UV Degradation of the Optical Properties of Acrylic for Neutrino and Dark Matter Experiments

UV-transmitting (UVT) acrylic is a commonly used light-propagating material in neutrino and dark matter detectors as it has low intrinsic radioactivity and exhibits low absorption in the detectors' light producing regions, from 350 nm to 500 nm. Degradation of optical transmittance in this region lowers light yields in the detector, which can affect energy reconstruction, resolution, and experimental sensitivities. We examine transmittance loss as a result of short- and long-term UV exposure for a variety of UVT acrylic samples from a number of acrylic manufacturers. Significant degradation peaking at 343 nm was observed in some UVT acrylics with as little as three hours of direct sunlight, while others exhibited softer degradation peaking at 310 nm over many days of exposure to sunlight. Based on their measured degradation results, safe time limits for indoor and outdoor UV exposure of UVT acrylic are formulated.Comment: 13 pages, 6 figures, 3 tables; To be submitted to Journal of Instrumentatio

Magnetoelectric Effect in Ni-PZT-Ni Cylindrical Layered Composite Synthesized by Electro-deposition

The magnetoelectric (ME) coupling of cylindrical trilayered composite was studied in this paper. The Ni-lead zirconate titanate (PZT)-Ni trilayered cylindrical composite was synthesized by electro-deposition. The maximum ME voltage coefficient of cylindrical ME composite is 35V/cm Oe, about three times higher than that of the plate trilayered composite with the same raw materials and magnetostrictive- piezoelectric phase thickness ratio. The high ME voltage coefficient of cylindrical composite owes to the self-bound effect of circle. Moreover, the resulting complex condition can induce a double peak in the field dependence of ME coefficient.Comment: 11 pages, 5 figure

Daylighting: appraisal at the early design stages

For a building design team concerned with the quality of the internal environment of buildings the percentage area of glazing on a building facade is one of the most useful criteria for judging the building envelope as a modifier of climate at early design stages since it is at the window that the various environmental parameters (heat, light and sound) remain only minimally modified. The percentage area of glazing can be used to relate the numerous and often conflicting functions of the window such as the provision of daylight, summer time teperatures, sound insulation, energy efficiency and view satisfaction