Carbon nanotube four-terminal devices for pressure sensing applications

Carbon nanotubes (CNTs) are of high interest for sensing applications,owing to their superior mechanical strength, high Young’s modulus and low density. In this work, we report on a facile approach for the fabrication of carbon nanotube devices using a four terminal configuration. Oriented carbon nanotube films were pulled out from a CNT forest wafer and then twisted into a yarn. Both the CNT film and yarn were arranged on elastomer membranes/diaphragms which were arranged on a laser cut acrylic frame to form pressure sensors. The sensors were calibrated using a precisely controlled pressure system, showing a large change of the output voltage of approximately 50 mV at a constant supply current of 100 μA and under a low applied pressure of 15 mbar. The results indicate the high potential of using CNT films and yarns for pressure sensing applications

Electronic Devices Based on Purified Carbon Nanotubes Grown By High Pressure Decomposition of Carbon Monoxide

The excellent properties of transistors, wires, and sensors made from single-walled carbon nanotubes (SWNTs) make them promising candidates for use in advanced nanoelectronic systems. Gas-phase growth procedures such as the high pressure decomposition of carbon monoxide (HiPCO) method yield large quantities of small diameter semiconducting SWNTs, which are ideal for use in nanoelectronic circuits. As-grown HiPCO material, however, commonly contains a large fraction of carbonaceous impurities that degrade properties of SWNT devices. Here we demonstrate a purification, deposition, and fabrication process that yields devices consisting of metallic and semiconducting nanotubes with electronic characteristics vastly superior to those of circuits made from raw HiPCO. Source-drain current measurements on the circuits as a function of temperature and backgate voltage are used to quantify the energy gap of semiconducting nanotubes in a field effect transistor geometry. This work demonstrates significant progress towards the goal of producing complex integrated circuits from bulk-grown SWNT material.Comment: 6 pages, 4 figures, to appear in Nature Material

Addressing the isomer cataloguing problem for nanopores in two-dimensional materials

The presence of extended defects or nanopores in two-dimensional (2D) materials can change the electronic, magnetic and barrier membrane properties of the materials. However, the large number of possible lattice isomers of nanopores makes their quantitative study a seemingly intractable problem, confounding the interpretation of experimental and simulated data. Here we formulate a solution to this isomer cataloguing problem (ICP), combining electronic-structure calculations, kinetic Monte Carlo simulations, and chemical graph theory, to generate a catalogue of unique, most-probable isomers of 2D lattice nanopores. The results demonstrate remarkable agreement with precise nanopore shapes observed experimentally in graphene and show that the thermodynamic stability of a nanopore is distinct from its kinetic stability. Triangular nanopores prevalent in hexagonal boron nitride are also predicted, extending this approach to other 2D lattices. The proposed method should accelerate the application of nanoporous 2D materials by establishing specific links between experiment and theory/simulations, and by providing a much-needed connection between molecular design and fabrication

c-Abl phosphorylation of ΔNp63α is critical for cell viability

The p53 family member p63 has been shown to be critical for growth, proliferation and chemosensitivity. Here we demonstrate that the c-Abl tyrosine kinase phosphorylates the widely expressed ΔNp63α isoform and identify multiple sites by mass spectrometry in vitro and in vivo. Phopshorylation by c-Abl results in greater protein stability of both ectopically expressed and endogenous ΔNp63α. c-Abl phosphorylation of ΔNp63α induces its binding to Yes-associated protein (YAP) and silencing of YAP by siRNA reduces the c-Abl-induced increase of ΔNp63α levels. We further show that cisplatin induces c-Abl phosphorylation of ΔNp63α and its binding to YAP. Overexpression of ΔNp63α, but not the c-Abl phosphosites mutant, protects cells from cisplatin treatment. Finally, we demonstrate the rescue of p63 siRNA-mediated loss of viability with p63siRNA insensitive construct of ΔNp63α but not the phosphosites mutant. These results demonstrate that c-Abl phosphorylation of ΔNp63α regulates its protein stability, by inducing binding of YAP, and is critical for cell viability

A Surface Modification Decision Tree to Influence Design in Additive Manufacturing

Additive manufacturing (AM) presents a very different set of design challenges to traditional manufacturing. Layer-wise building brings about issues with residual stresses and support requirements which lead to failures during processing of poorly-designed parts. Additionally, there is a need for post-processing due to poor part quality, which adds another process to the chain with its own unique design limitations. This paper discusses the issues surrounding designing for AM and the subsequent post-processing. A future vision is proposed for the selection of post-processes and the relative design adjustments to accommodate the chosen techniques. A decision tree is presented as a framework for process selection based on part requirements. Although at present, the data necessary to realise this vision is incomplete, with further research into the capabilities and design constraints of different post-processes, this approach could provide a systematic method for integrating design for post-processing with AM design

Carbon nanotube four-terminal devices for pressure sensing applications

Carbon nanotubes (CNTs) are of high interest for sensing applications, owing to their superior mechanical strength, high Young’s modulus and low density. In this work, we report on a facile approach for the fabrication of carbon nanotube devices using a four terminal configuration. Oriented carbon nanotube films were pulled out from a CNT forest wafer and then twisted into a yarn. Both the CNT film and yarn were arranged on elastomer membranes/diaphragms which were ar-ranged on a laser cut acrylic frame to form pressure sensors. The sensors were calibrated using a precisely controlled pressure system, showing a large change of the output voltage of approximately 50 mV at a constant supply current of 100µA and under a low applied pressure of 15 mbar. The results indicate the high potential of using CNT films and yarns for pressure sensing applications

Interaction of the Deubiquitinating Enzyme Ubp2 and the E3 Ligase Rsp5 Is Required for Transporter/Receptor Sorting in the Multivesicular Body Pathway

Protein ubiquitination is essential for many events linked to intracellular protein trafficking. We sought to elucidate the possible involvement of the S. cerevisiae deubiquitinating enzyme Ubp2 in transporter and receptor trafficking after we (this study) and others established that affinity purified Ubp2 interacts stably with the E3 ubiquitin ligase Rsp5 and the (ubiquitin associated) UBA domain containing protein Rup1. UBP2 interacts genetically with RSP5, while Rup1 facilitates the tethering of Ubp2 to Rsp5 via a PPPSY motif. Using the uracil permease Fur4 as a model reporter system, we establish a role for Ubp2 in membrane protein turnover. Similar to hypomorphic rsp5 alleles, cells deleted for UBP2 exhibited a temporal stabilization of Fur4 at the plasma membrane, indicative of perturbed protein trafficking. This defect was ubiquitin dependent, as a Fur4 N-terminal ubiquitin fusion construct bypassed the block and restored sorting in the mutant. Moreover, the defect was absent in conditions where recycling was absent, implicating Ubp2 in sorting at the multivesicular body. Taken together, our data suggest a previously overlooked role for Ubp2 as a positive regulator of Rsp5-mediated membrane protein trafficking subsequent to endocytosis

Bi-allelic genetic variants in the translational GTPases GTPBP1 and GTPBP2 cause a distinct identical neurodevelopmental syndrome

The homologous genes GTPBP1 and GTPBP2 encode GTP-binding proteins 1 and 2, which are involved in ribosomal homeostasis. Pathogenic variants in GTPBP2 were recently shown to be an ultra-rare cause of neurodegenerative or neurodevelopmental disorders (NDDs). Until now, no human phenotype has been linked to GTPBP1. Here, we describe individuals carrying bi-allelic GTPBP1 variants that display an identical phenotype with GTPBP2 and characterize the overall spectrum of GTP-binding protein (1/2)-related disorders. In this study, 20 individuals from 16 families with distinct NDDs and syndromic facial features were investigated by whole-exome (WES) or whole-genome (WGS) sequencing. To assess the functional impact of the identified genetic variants, semi-quantitative PCR, western blot, and ribosome profiling assays were performed in fibroblasts from affected individuals. We also investigated the effect of reducing expression of CG2017, an ortholog of human GTPBP1/2, in the fruit fly Drosophila melanogaster. Individuals with bi-allelic GTPBP1 or GTPBP2 variants presented with microcephaly, profound neurodevelopmental impairment, pathognomonic craniofacial features, and ectodermal defects. Abnormal vision and/or hearing, progressive spasticity, choreoathetoid movements, refractory epilepsy, and brain atrophy were part of the core phenotype of this syndrome. Cell line studies identified a loss-of-function (LoF) impact of the disease-associated variants but no significant abnormalities on ribosome profiling. Reduced expression of CG2017 isoforms was associated with locomotor impairment in Drosophila. In conclusion, bi-allelic GTPBP1 and GTPBP2 LoF variants cause an identical, distinct neurodevelopmental syndrome. Mutant CG2017 knockout flies display motor impairment, highlighting the conserved role for GTP-binding proteins in CNS development across species