Co-firing of biomass with coals Part 1. Thermogravimetric kinetic analysis of combustion of fir (abies bornmulleriana) wood

The chemical composition and reactivity of fir (Abies bornmulleriana) wood under non-isothermal thermogravimetric (TG) conditions were studied. Oxidation of the wood sample at temperatures near 600 A degrees C caused the loss of aliphatics from the structure of the wood and created a char heavily containing C-O functionalities and of highly aromatic character. On-line FTIR recordings of the combustion of wood indicated the oxidation of carbonaceous and hydrogen content of the wood and release of some hydrocarbons due to pyrolysis reactions that occurred during combustion of the wood. TG analysis was used to study combustion of fir wood. Non-isothermal TG data were used to evaluate the kinetics of the combustion of this carbonaceous material. The article reports application of Ozawa-Flynn-Wall model to deal with non-isothermal TG data for the evaluation of the activation energy corresponding to the combustion of the fir wood. The average activation energy related to fir wood combustion was 128.9 kJ/mol, and the average reaction order for the combustion of wood was calculated as 0.30

Performance-Based Seismic Design and Assessment of Bridges

Current trends in the seismic design and assessment of bridges are discussed, with emphasis on two procedures that merit some particular attention, displacement-based procedures and deformation-based procedures. The available performance-based methods for bridges are critically reviewed and a number of critical issues are identified, which arise in all procedures. Then two recently proposed methods are presented in some detail, one based on the direct displacement-based design approach, using equivalent elastic analysis and properly reduced displacement spectra, and one based on the deformation-based approach, which involves a type of partially inelastic response-history analysis for a set of ground motions and wherein pier ductility is included as a design parameter, along with displacement criteria. The current trends in seismic assessment of bridges are then summarised and the more rigorous assessment procedure, i.e. nonlinear dynamic response-history analysis, is used to assess the performance of bridges designed to the previously described procedures. Finally some comments are offered on the feasibility of including such methods in the new generation of bridge codes

Stress related epigenetic changes may explain opportunistic success in biological invasions in Antipode mussels

Different environmental factors could induce epigenetic changes, which are likely involved in the biological invasion process. Some of these factors are driven by humans as, for example, the pollution and deliberate or accidental introductions and others are due to natural conditions such as salinity. In this study, we have analysed the relationship between different stress factors: time in the new location, pollution and salinity with the methylation changes that could be involved in the invasive species tolerance to new environments. For this purpose, we have analysed two different mussels’ species, reciprocally introduced in antipode areas: the Mediterranean blue mussel Mytilus galloprovincialis and the New Zealand pygmy mussel Xenostrobus securis, widely recognized invaders outside their native distribution ranges. The demetylathion was higher in more stressed population, supporting the idea of epigenetic is involved in plasticity process. These results can open a new management protocols, using the epigenetic signals as potential pollution monitoring tool. We could use these epigenetic marks to recognise the invasive status in a population and determine potential biopollutants

Why are we not flooded by involuntary thoughts about the past and future? Testing the cognitive inhibition dependency hypothesis

© The Author(s) 2018In everyday life, involuntary thoughts about future plans and events occur as often as involuntary thoughts about the past. However, compared to involuntary autobiographical memories (IAMs), such episodic involuntary future thoughts (IFTs) have become a focus of study only recently. The aim of the present investigation was to examine why we are not constantly flooded by IFTs and IAMs given that they are often triggered by incidental cues while performing undemanding activities. One possibility is that activated thoughts are suppressed by the inhibitory control mechanism, and therefore depleting inhibitory control should enhance the frequency of both IFTs and IAMs. We report an experiment with a between-subjects design, in which participants in the depleted inhibition condition performed a 60-min high-conflict Stroop task before completing a laboratory vigilance task measuring the frequency of IFTs and IAMs. Participants in the intact inhibition condition performed a version of the Stroop task that did not deplete inhibitory control. To control for physical and mental fatigue resulting from performing the 60-min Stroop tasks in experimental conditions, participants in the control condition completed only the vigilance task. Contrary to predictions, the number of IFTs and IAMs reported during the vigilance task, using the probe-caught method, did not differ across conditions. However, manipulation checks showed that participants’ inhibitory resources were reduced in the depleted inhibition condition, and participants were more tired in the experimental than in the control conditions. These initial findings suggest that neither inhibitory control nor physical and mental fatigue affect the frequency of IFTs and IAMs.Peer reviewedFinal Published versio

What are the living conditions and health status of those who don't report their migration status? a population-based study in Chile

BACKGROUND: Undocumented immigrants are likely to be missing from population databases, making it impossible to identify an accurate sampling frame in migration research. No population-based data has been collected in Chile regarding the living conditions and health status of undocumented immigrants. However, the CASEN survey (Caracterizacion Socio- Economica Nacional) asked about migration status in Chile for the first time in 2006 and provides an opportunity to set the base for future analysis of available migration data. We explored the living conditions and health of self-reported immigrants and respondents who preferred not to report their migration status in this survey. METHODS: Cross-sectional secondary analysis of CASEN survey in Chile in 2006. Outcomes: any disability, illness/accident, hospitalization/surgery, cancer/chronic condition (all binary variables); and the number of medical/emergency attentions received (count variables). Covariates: Demographics (age, sex, marital status, urban/rural, ethnicity), socioeconomic status (education level, employment status and household income), and material standard of living (overcrowding, sanitation, housing quality). Weighted regression models were estimated for each health outcome, crude and adjusted by sets of covariates, in STATA 10.0. RESULTS: About 1% of the total sample reported being immigrants and 0.7% preferred not to report their migration status (Migration Status - Missing Values; MS-MV). The MS-MV lived in more deprived conditions and reported a higher rate of health problems than immigrants. Some gender differences were observed by health status among immigrants and the MS-MV but they were not statistically significant. Regressions indicated that age, sex, SES and material factors consistently affected MS-MVs’ chance of presenting poor health and these patterns were different to those found among immigrants. Great heterogeneity in both the MS-MV and the immigrants, as indicated by wide confidence intervals, prevented the identification of other significantly associated covariates. CONCLUSION: This is the first study to look at the living conditions and health of those that preferred not to respond their migration status in Chile. Respondents that do not report their migration status are vulnerable to poor health and may represent undocumented immigrants. Surveys that fail to identify these people are likely to misrepresent the experiences of immigrants and further quantitative and qualitative research is urgently required

Casting and Mechanized Titanium Restorations

INTRODUCTION: New materials and methods for clinical dentistry are continuously being introduced. There is a growing interest in the use of titanium as a restorative material for several reasons: its relatively low cost, favorable physical properties and biocompatibility. However, titanium is technically more difficult to handle than conventional metal alloys. There are two fabrication methods for titanium restorations: casting and mechanized (a combination of machine duplication and spark erosion-Pro- -cera method). PURPOSE: The aim of this review was to evaluate the advantages and disadvantages of the two fabrication methods used for titanium restorations and to make some recommendations on the indications. MATERIAL AND METHODS: Dental literature was reviewed including clinical and technique articles on the use of titanium in prosthodontic restorations. RESULT: The use of mechanized titanium has more restrictive indications than casting, but assures better marginal fit of the restorations. The bond strength of porcelain fused to titanium is questioned, because of the lower rigidity of titanium than conventional alloys and discrepancies in the thermal expansion coefficient between titanium and ceramic. Thus, low fusing ceramics tend to predominate today. The esthetic result varies. Furthermore titanium restorations require a qualified dental technician. CONCLUSION: It can be concluded that titanium is a promising alternative for prosthodontic restorations. Several error sources associated with casting can be eliminated with mechanized titanium restorations. However, little information is availableon the clinical performance of titanium restorations. More clinical prospective studies are necessary before titanium can be recommended for general clinical use

Widespread range expansions shape latitudinal variation in insect thermal limits

I thank the authors of previous studies on global variation in insect thermal tolerances who have generously provided open access use of their data sets.Peer reviewedPostprin

Study of Bc+B_c^+ decays to the K+K−π+K^+K^-\pi^+ final state and evidence for the decay Bc+→χc0π+B_c^+\to\chi_{c0}\pi^+

A study of $B_c^+\to K^+K^-\pi^+$ decays is performed for the first time using data corresponding to an integrated luminosity of 3.0 $\mathrm{fb}^{-1}$ collected by the LHCb experiment in $pp$ collisions at centre-of-mass energies of $7$ and $8$ TeV. Evidence for the decay $B_c^+\to\chi_{c0}(\to K^+K^-)\pi^+$ is reported with a significance of 4.0 standard deviations, resulting in the measurement of $\frac{\sigma(B_c^+)}{\sigma(B^+)}\times\mathcal{B}(B_c^+\to\chi_{c0}\pi^+)$ to be $(9.8^{+3.4}_{-3.0}(\mathrm{stat})\pm 0.8(\mathrm{syst}))\times 10^{-6}$. Here $\mathcal{B}$ denotes a branching fraction while $\sigma(B_c^+)$ and $\sigma(B^+)$ are the production cross-sections for $B_c^+$ and $B^+$ mesons. An indication of $\bar b c$ weak annihilation is found for the region $m(K^-\pi^+)<1.834\mathrm{\,Ge\kern -0.1em V\!/}c^2$, with a significance of 2.4 standard deviations.Comment: All figures and tables, along with any supplementary material and additional information, are available at https://lhcbproject.web.cern.ch/lhcbproject/Publications/LHCbProjectPublic/LHCb-PAPER-2016-022.html, link to supplemental material inserted in the reference

Performance of the CMS Cathode Strip Chambers with Cosmic Rays

The Cathode Strip Chambers (CSCs) constitute the primary muon tracking device in the CMS endcaps. Their performance has been evaluated using data taken during a cosmic ray run in fall 2008. Measured noise levels are low, with the number of noisy channels well below 1%. Coordinate resolution was measured for all types of chambers, and fall in the range 47 microns to 243 microns. The efficiencies for local charged track triggers, for hit and for segments reconstruction were measured, and are above 99%. The timing resolution per layer is approximately 5 ns

Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV

The performance of muon reconstruction, identification, and triggering in CMS has been studied using 40 inverse picobarns of data collected in pp collisions at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection criteria covering a wide range of physics analysis needs have been examined. For all considered selections, the efficiency to reconstruct and identify a muon with a transverse momentum pT larger than a few GeV is above 95% over the whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4, while the probability to misidentify a hadron as a muon is well below 1%. The efficiency to trigger on single muons with pT above a few GeV is higher than 90% over the full eta range, and typically substantially better. The overall momentum scale is measured to a precision of 0.2% with muons from Z decays. The transverse momentum resolution varies from 1% to 6% depending on pseudorapidity for muons with pT below 100 GeV and, using cosmic rays, it is shown to be better than 10% in the central region up to pT = 1 TeV. Observed distributions of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO