Processing and characterization of high-efficiency

Silicon solar cells with efficiencies ranging from 17 to 17.7 percent are described. These cells were processed on low-resistivity FZ substrates using techniques recently developed for high efficiency terrestrial solar cells. Preliminary results indicate that the high efficiency cell is more susceptible to radiation damage in that it retains a smaller proportion of its original power output when compared to conventional space cells after exposure to 5 times 10 to the 14th power 1 MeV electrons. However, the cell does maintain a greater overall power output than the conventional cells to which it was compared. Furthermore, this cell does not demonstrate post-electron irradiation photon decay as has been described for cells processed on 1-10 ohm-cm float zone silicon

New high-efficiency silicon solar cells

A design for silicon solar cells was investigated as an approach to increasing the cell open-circuit voltage and efficiency for flat-plate terrestrial photovoltaic applications. This deviates from past designs, where either the entire front surface of the cell is covered by a planar junction or the surface is textured before junction formation, which results in an even greater (up to 70%) junction area. The heavily doped front region and the junction space charge region are potential areas of high recombination for generated and injected minority carriers. The design presented reduces junction area by spreading equidiameter dot junctions across the surface of the cell, spaced about a diffusion length or less from each other. Various dot diameters and spacings allowed variations in total junction area. A simplified analysis was done to obtain a first-order design optimization. Efficiencies of up to 19% can be obtained. Cell fabrication involved extra masking steps for selective junction diffusion, and made surface passivation a key element in obtaining good collection. It also involved photolithography, with line widths down to microns. A method is demonstrated for achieving potentially high open-circuit voltages and solar-cell efficiencies

Optimization of the leak conductance in the squid giant axon

We report on a theoretical study showing that the leak conductance density, \GL, in the squid giant axon appears to be optimal for the action potential firing frequency. More precisely, the standard assumption that the leak current is composed of chloride ions leads to the result that the experimental value for \GL is very close to the optimal value in the Hodgkin-Huxley model which minimizes the absolute refractory period of the action potential, thereby maximizing the maximum firing frequency under stimulation by sharp, brief input current spikes to one end of the axon. The measured value of \GL also appears to be close to optimal for the frequency of repetitive firing caused by a constant current input to one end of the axon, especially when temperature variations are taken into account. If, by contrast, the leak current is assumed to be composed of separate voltage-independent sodium and potassium currents, then these optimizations are not observed.Comment: 9 pages; 9 figures; accepted for publication in Physical Review

Characterization of grain boundaries in silicon

Zero-bias conductance and capacitance measurements at various temperatures were used to study trapped charges and potential barrier height at the boundaries. Deep-level transient spectroscopy (DLTS) was applied to measure the density of states at the boundary. A study of photoconductivity of grain boundaries in p-type silicon demonstrated the applicability of the technique in the measurement of minority carrier recombination velocity at the grain boundary. Enhanced diffusion of phosphorus at grain boundaries in three cast polycrystalline photovoltaic materials was studied. Enhancements for the three were the same, indicating that the properties of boundaries are similar, although grown by different techniques. Grain boundaries capable of enhancing the diffusion were found always to have strong recombination activities; the phenomena could be related to dangling bonds at the boundaries. Evidence that incoherent second-order twins of (111)/(115) type are diffusion-active is presented

Study and optimization of RPCs for high rate applications

Due to the low cost, good time resolution and the properties of RPCs with respect to electronics damage protection, they are chosen for many large experiments. These detectors are reliable and stable in their operation with counting rates up to kHz/cm2. The aim of this work is to understand the fundamental rate limits of RPCs in order to find an efficient way for their optimization and hence, extend their applications. Several types of materials have been used and operational parameters have been optimized in this work comprising simulations and experiment. High efficiency, excellent position resolution, low noise and high rate capability is demonstrated. These type of RPCs open new avenues in several applications, for example in crystallography, biology and medicine

Impact of antibacterials on subsequent resistance and clinical outcomes in adult patients with viral pneumonia: An opportunity for stewardship

INTRODUCTION: Respiratory viruses are increasingly recognized as significant etiologies of pneumonia among hospitalized patients. Advanced technologies using multiplex molecular assays and polymerase-chain reaction increase the ability to identify viral pathogens and may ultimately impact antibacterial use. METHOD: This was a single-center retrospective cohort study to evaluate the impact of antibacterials in viral pneumonia on clinical outcomes and subsequent multidrug-resistant organism (MDRO) infections/colonization. Patients admitted from March 2013 to November 2014 with positive respiratory viral panels (RVP) and radiographic findings of pneumonia were included. Patients transferred from an outside hospital or not still hospitalized 72 hours after the RVP report date were excluded. Patients were categorized based on exposure to systemic antibacterials: less than 3 days representing short-course therapy and 3 to 10 days being long-course therapy. RESULTS: A total of 174 patients (long-course, n = 67; short-course, n = 28; mixed bacterial-viral infection, n = 79) were included with most being immunocompromised (56.3 %) with active malignancy the primary etiology (69.4 %). Rhinovirus/Enterovirus (23 %), Influenza (19 %), and Parainfluenza (15.5 %) were the viruses most commonly identified. A total of 13 different systemic antibacterials were used as empiric therapy in the 95 patients with pure viral infection for a total of 466 days-of-therapy. Vancomycin (50.7 %), cefepime (40.3 %), azithromycin (40.3 %), meropenem (23.9 %), and linezolid (20.9 %) were most frequently used. In-hospital mortality did not differ between patients with viral pneumonia in the short-course and long-course groups. Subsequent infection/colonization with a MDRO was more frequent in the long-course group compared to the short-course group (53.2 vs 21.1 %; P = 0.027). CONCLUSION: This study found that long-course antibacterial use in the setting of viral pneumonia had no impact on clinical outcomes but increased the incidence of subsequent MDRO infection/colonization

Epidemiology, co-infections, and outcomes of viral pneumonia in adults an observational cohort study

Advanced technologies using polymerase-chain reaction have allowed for increased recognition of viral respiratory infections including pneumonia. Co-infections have been described for several respiratory viruses, especially with influenza. Outcomes of viral pneumonia, including cases with co-infections, have not been well described. This was observational cohort study conducted to describe hospitalized patients with viral pneumonia including co-infections, clinical outcomes, and predictors of mortality. Patients admitted from March 2013 to November 2014 with a positive respiratory virus panel (RVP) and radiographic findings of pneumonia within 48 h of the index RVP were included. Co-respiratory infection (CRI) was defined as any organism identification from a respiratory specimen within 3 days of the index RVP. Predictors of in-hospital mortality on univariate analysis were evaluated in a multivariate model. Of 284 patients with viral pneumonia, a majority (51.8%) were immunocompromised. A total of 84 patients (29.6%) were found to have a CRI with 48 (57.6%) having a bacterial CRI. Viral CRI with HSV, CMV, or both occurred in 28 patients (33.3%). Fungal (16.7%) and other CRIs (7.1%) were less common. Many patients required mechanical ventilation (54%) and vasopressor support (36%). Overall in-hospital mortality was high (23.2%) and readmissions were common with several patients re-hospitalized within 30 (21.1%) and 90 days (36.7%) of discharge. Predictors of in-hospital mortality on multivariate regression included severity of illness factors, stem-cell transplant, and identification of multiple respiratory viruses. In conclusion, hospital mortality is high among adult patients with viral pneumonia and patients with multiple respiratory viruses identified may be at a higher risk

Fitness Ranking of Individual Mutants Drives Patterns of Epistatic Interactions in HIV-1

This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited

The crisis in American railroads - A study of failures in profit and performance - with lessons for other regulated industry

Thesis (M.B.A.)--Boston Universit

On the gravitational production of superheavy dark matter

The dark matter in the universe can be in the form of a superheavy matter species (WIMPZILLA). Several mechanisms have been proposed for the production of WIMPZILLA particles during or immediately following the inflationary epoch. Perhaps the most attractive mechanism is through gravitational particle production, where particles are produced simply as a result of the expansion of the universe. In this paper we present a detailed numerical calculation of WIMPZILLA gravitational production in hybrid-inflation models and natural-inflation models. Generalizing these findings, we also explore the dependence of the gravitational production mechanism on various models of inflation. We show that superheavy dark matter production seems to be robust, with Omega_X h^2 ~ (M_X / (10^11 GeV))^2 (T_RH / (10^9 GeV)), so long as M_X < H_I, where M_X is the WIMPZILLA mass, T_RH is the reheat temperature, and H_I is the expansion rate of the universe during inflation.Comment: 26 pages, 7 figures; LaTeX; submitted to Physical Review D; minor typographical error correcte