Zooming into the broad line region of the gravitationally lensed quasar Q2237+0305 = the Einstein Cross: III. Determination of the size and structure of the CIV and CIII] emitting regions using microlensing

Aims: We aim to use microlensing taking place in the lensed quasar Q2237+0305 to study the structure of the broad line region and measure the size of the region emitting the CIV and CIII] lines. Methods: Based on 39 spectrophotometric monitoring data points obtained between Oct. 2004 and Dec. 2007, we derive lightcurves for the CIV and CIII] emission lines. We use three different techniques to analyse the microlensing signal. Different components of the lines (narrow, broad and very broad) are identified and studied. We build a library of simulated microlensing lightcurves which reproduce the signal observed in the continuum and in the lines provided only the source size is changed. A Bayesian analysis scheme is then developed to derive the size of the various components of the BLR. Results: 1. The half-light radius of the region emitting the CIV line is found to be R_CIV ~ 66^{+110}_{-46} lt-days = 0.06^{+0.09}_{-0.04} pc = 1.7^{+2.8}_{-1.1} 10^17 cm (at 68.3% CI). Similar values are obtained for CIII]. Relative sizes of the V-band continuum and of the carbon line emitting regions are also derived with median values of R(line)/R(cont) in the range [4,29], depending of the FWHM of the line component. 2. The size of the CIV emitting region agrees with the Radius-Luminosity relationship derived from reverberation mapping. Using the virial theorem we derive the mass of the black hole in Q2237+0305 to be M_BH ~ 10^{8.3+/-0.3} M_sun. 3. We find that the CIV and CIII] lines are produced in at least 2 spatially distinct regions, the most compact one giving rise to the broadest component of the line. The broad and narrow line profiles are slightly different for CIV and CIII]. 4. Our analysis suggests a different structure of the CIV and FeII+III emitting regions, with the latter being produced in the inner part of the BLR or in a less extended emitting region than CIV.Peer reviewe

Time delay between images of the lensed quasar UM673

We study brightness variations in the double lensed quasar UM673 (Q0142-100) with the aim of measuring the time delay between its two images. In the paper we combine our previously published observational data of UM673 obtained during the 2003 - 2005 seasons at the Maidanak Observatory with archival and recently observed Maidanak and CTIO UM673 data. We analyze the V, R and I-band light curves of the A and B images of UM673, which cover ten observational seasons from August 2001 to November 2010. We also analyze the time evolution of the difference in magnitudes between images A and B of UM673 over more than ten years. We find that the quasar exhibits both short-term (with amplitude of \sim 0.1 mag in the R band) and high-amplitude (\sim 0.3 mag) long-term variability on timescales of about several months and several years, respectively. These brightness variations are used to constrain the time delay between the images of UM673. From cross-correlation analysis of the A and B quasar light curves and error analysis we measure the mean time delay and its error of 89 \pm11 days. Given the input time delay of 88 days, the most probable value of the delay that can be recovered from light curves with the same statistical properties as the observed R-band light curves of UM673 is 95{+5/-16}{+14/-29} days (68 and 95 % confidence intervals). Analysis of the V - I color variations and V, R and I-band magnitude differences of the quasar images does not show clear evidence of the microlensing variations between 1998 and 2010.Comment: Submitted to A&A, 11 pages, 9 figure

Integral field spectroscopy of four lensed quasars: analysis of their neighborhood and evidence for microlensing

CONTEXT: Gravitationally lensed quasars constitute an independent tool to derive H0 through time-delays; they offer as well the opportunity to study the mass distribution and interstellar medium of their lensing galaxies and, through microlensing they also allow one to study details of the emitting source. AIMS: For such studies, one needs to have an excellent knowledge of the close environment of the lensed images in order to model the lensing potential: this means observational data over a large field-of-view and spectroscopy at high spatial resolution. METHODS: We present VIMOS integral field observations around four lensed quasars: HE 0230-2130, RX J0911.4+0551, H 1413+117 and B 1359+154. Using the low, medium and high resolution modes, we study the quasar images and the quasar environments, as well as provide a detailed report of the data reduction. RESULTS: Comparison between the quasar spectra of the different images reveals differences for HE 0230-2130, RX J0911.4+0551 and H 1413+117: flux ratios between the images of the same quasar are different when measured in the emission lines and in the continuum. We have also measured the redshifts of galaxies in the neighborhood of HE 0230-2130 and RX J0911.4+0551 which possibly contribute to the total lensing potential. CONCLUSIONS: A careful analysis reveals that microlensing is the most natural explanation for the (de)magnification of the continuum emitting region of the background sources. In HE 0230-2130, image D is likely to be affected by microlensing magnification; in RX J0911.4+0551, images A1 and A3 are likely to be modified by microlensing de-magnification and in H 1413+117, at least image D is affected by microlensing.Comment: 13 pages, 18 figures. Accepted for publication in A&A: January 7, 200

Microscopic calculation of 6Li elastic and transition form factors

Variational Monte Carlo wave functions, obtained from a realistic Hamiltonian consisting of the Argonne v18 two-nucleon and Urbana-IX three-nucleon interactions, are used to calculate the 6Li ground-state longitudinal and transverse form factors as well as transition form factors to the first four excited states. The charge and current operators include one- and two-body components, leading terms of which are constructed consistently with the two-nucleon interaction. The calculated form factors and radiative widths are in good agreement with available experimental data.Comment: 9 pages, 2 figures, REVTeX, submitted to Physical Review Letters, with updated introduction and reference

Microlensing in H1413+117 : disentangling line profile emission and absorption in a broad absorption line quasar

On the basis of 16 years of spectroscopic observations of the four components of the gravitationally lensed broad absorption line (BAL) quasar H1413+117, covering the ultraviolet to visible rest-frame spectral range, we analyze the spectral differences observed in the P Cygni-type line profiles and have used the microlensing effect to derive new clues to the BAL profile formation. We confirm that the spectral differences observed in component D can be attributed to a microlensing effect lasting at least a decade. We show that microlensing magnifies the continuum source in image D, leaving the emission line region essentially unaffected. We interpret the differences seen in the absorption profiles of component D as the result of an emission line superimposed onto a nearly black absorption profile. We also find that the continuum source and a part of the broad emission line region are likely de-magnified in component C, while components A and B are not affected by microlensing. We show that microlensing of the continuum source in component D has a chromatic dependence compatible with the thermal continuum emission of a standard Shakura-Sunyaev accretion disk. Using a simple decomposition method to separate the part of the line profiles affected by microlensing and coming from a compact region from the part unaffected by this effect and coming from a larger region, we disentangle the true absorption line profiles from the true emission line profiles. The extracted emission line profiles appear double-peaked, suggesting that the emission is occulted by a strong absorber, narrower in velocity than the full absorption profile, and emitting little by itself. We propose that the outflow around H1413+117 is constituted by a high-velocity polar flow and a denser, lower velocity disk seen nearly edge-on.Comment: Accepted for publication in Astronomy and Astrophysic

Gravitationally lensed QSOs in the ISSIS/WSO-UV era

Gravitationally lensed QSOs (GLQs) at redshift z = 1-2 play a key role in understanding the cosmic evolution of the innermost parts of active galaxies (black holes, accretion disks, coronas and internal jets), as well as the structure of galaxies at intermediate redshifts. With respect to studies of normal QSOs, GLQ programmes have several advantages. For example, a monitoring of GLQs may lead to unambiguous detections of intrinsic and extrinsic variations. Both kinds of variations can be used to discuss central engines in distant QSOs, and mass distributions and compositions of lensing galaxies. In this context, UV data are of particular interest, since they correspond to emissions from the immediate surroundings of the supermassive black hole. We describe some observation strategies to analyse optically bright GLQs at z of about 1.5, using ISSIS (CfS) on board World Space Observatory-Ultraviolet.Comment: 7 pages, 4 figures, Accepted for publication in Astrophysics & Space Scienc

Stars and dark matter in the spiral gravitational lens 2237+0305

We construct a mass model for the spiral lens galaxy 2237+0305, at redshift z_l=0.04, based on gravitational-lensing constraints, HI rotation, and new stellar-kinematic information, based on data taken with the ESI spectrograph on the 10m Keck-II Telescope. High resolution rotation curves and velocity dispersion profiles along two perpendicular directions, close to the major and minor axes of the lens galaxy, were obtained by fitting the Mgb-Fe absorption line region. The stellar rotation curve rises slowly and flattens at r~1.5" (~1.1 kpc). The velocity dispersion profile is approximately flat. A combination of photometric, kinematic and lensing information is used to construct a mass model for the four major mass components of the system -- the dark matter halo, disc, bulge, and bar. The best-fitting solution has a dark matter halo with a logarithmic inner density slope of gamma=0.9+/-0.3 for rho_DM propto r^-gamma, a bulge with M/L_B=6.6+/-0.3 Upsilon_odot, and a disc with M/L_B =1.2+/-0.3 Upsilon_odot, in agreement with measurements of late-type spirals. The bulge dominates support in the inner regions where the multiple images are located and is therefore tightly constrained by the observations. The disc is sub-maximal and contributes 45+/-11 per cent of the rotational support of the galaxy at 2.2r_d. The halo mass is (2.0+/-0.6) x 10^12 M_odot, and the stellar to virial mass ratio is 7.0+/-2.3 per cent, consistent with typical galaxies of the same mass.Comment: 14 pages, 6 figures, MNRAS, in pres

Cosmological distance indicators

We review three distance measurement techniques beyond the local universe: (1) gravitational lens time delays, (2) baryon acoustic oscillation (BAO), and (3) HI intensity mapping. We describe the principles and theory behind each method, the ingredients needed for measuring such distances, the current observational results, and future prospects. Time delays from strongly lensed quasars currently provide constraints on $H_0$ with < 4% uncertainty, and with 1% within reach from ongoing surveys and efforts. Recent exciting discoveries of strongly lensed supernovae hold great promise for time-delay cosmography. BAO features have been detected in redshift surveys up to z <~ 0.8 with galaxies and z ~ 2 with Ly-$\alpha$ forest, providing precise distance measurements and $H_0$ with < 2% uncertainty in flat $\Lambda$CDM. Future BAO surveys will probe the distance scale with percent-level precision. HI intensity mapping has great potential to map BAO distances at z ~ 0.8 and beyond with precisions of a few percent. The next years ahead will be exciting as various cosmological probes reach 1% uncertainty in determining $H_0$, to assess the current tension in $H_0$ measurements that could indicate new physics.Comment: Review article accepted for publication in Space Science Reviews (Springer), 45 pages, 10 figures. Chapter of a special collection resulting from the May 2016 ISSI-BJ workshop on Astronomical Distance Determination in the Space Ag

Toward an internally consistent astronomical distance scale

Accurate astronomical distance determination is crucial for all fields in astrophysics, from Galactic to cosmological scales. Despite, or perhaps because of, significant efforts to determine accurate distances, using a wide range of methods, tracers, and techniques, an internally consistent astronomical distance framework has not yet been established. We review current efforts to homogenize the Local Group's distance framework, with particular emphasis on the potential of RR Lyrae stars as distance indicators, and attempt to extend this in an internally consistent manner to cosmological distances. Calibration based on Type Ia supernovae and distance determinations based on gravitational lensing represent particularly promising approaches. We provide a positive outlook to improvements to the status quo expected from future surveys, missions, and facilities. Astronomical distance determination has clearly reached maturity and near-consistency.Comment: Review article, 59 pages (4 figures); Space Science Reviews, in press (chapter 8 of a special collection resulting from the May 2016 ISSI-BJ workshop on Astronomical Distance Determination in the Space Age