Guaranteeing Input Tracking For Constrained Systems: Theory and Application to Demand Response

A method for certifying exact input trackability for constrained discrete time linear systems is introduced in this paper. A signal is assumed to be drawn from a reference set and the system must track this signal with a linear combination of its inputs. Using methods inspired from robust model predictive control, the proposed approach certifies the ability of a system to track any reference drawn from a polytopic set on a finite time horizon by solving a linear program. Optimization over a parameterization of the set of reference signals is discussed, and particular instances of parameterization of this set that result in a convex program are identified, allowing one to find the largest set of trackable signals of some class. Infinite horizon feasibility of the methods proposed is obtained through use of invariant sets, and an implicit description of such an invariant set is proposed. These results are tailored for the application of power consumption tracking for loads, where the operator of the load needs to certify in advance his ability to fulfill some requirement set by the network operator. An example of a building heating system illustrates the results.Comment: Technical Not

The Sloan Lens ACS Survey. VIII. The relation between environment and internal structure of early-type galaxies

We study the relation between the internal structure of early-type galaxies and their environment using 70 strong gravitational lenses from the Sloan ACS Lens Survey. The Sloan database is used to determine two measures of overdensity of galaxies around each lens: the projected number density of galaxies inside the tenth nearest neighbor (\Sigma_{10}) and within a cone of radius one h^{-1} Mpc (D_1). Our main results are: 1) The average overdensity is somewhat larger than unity, consistent with lenses preferring overdense environments as expected for massive early-type galaxies (12/70 lenses are in known groups/clusters). 2) The distribution of overdensities is indistinguishable from that of "twin" non-lens galaxies selected from SDSS to have the same redshift and stellar velocity dispersion \sigma_*. Thus, within our errors, lens galaxies are an unbiased population, and the SLACS results can be generalized to the overall population of early-type galaxies. 3) Typical contributions from external mass distribution are no more than a few per cent, reaching 10-20% (~0.05-0.10 external convergence) only in the most extreme overdensities. 4) No significant correlation between overdensity and slope of the mass density profile of the lens is found. 5) Satellite galaxies (those with a more luminous companion) have marginally steeper mass density profiles than central galaxies (those without). This result suggests that tidal stripping may affect the mass structure of early-type galaxies down to kpc scales probed by strong lensing, when they fall into larger structures [ABRIDGED].Comment: ApJ, in press; minor changes with respect to v

On designing observers for time-delay systems with nonlinear disturbances

This is the post print version of the article. The official published version can be obtained from the link below - Copyright 2002 Taylor & Francis LtdIn this paper, the observer design problem is studied for a class of time-delay nonlinear systems. The system under consideration is subject to delayed state and non-linear disturbances. The time-delay is allowed to be time-varying, and the non-linearities are assumed to satisfy global Lipschitz conditions. The problem addressed is the design of state observers such that, for the admissible time-delay as well as non-linear disturbances, the dynamics of the observation error is globally exponentially stable. An effective algebraic matrix inequality approach is developed to solve the non-linear observer design problem. Specifically, some conditions for the existence of the desired observers are derived, and an explicit expression of desired observers is given in terms of some free parameters. A simulation example is included to illustrate the practical applicability of the proposed theory.The work of Z. Wang was supported in part by the University of Kaiserslautern of Germany and the Alexander von Humboldt Foundation of Germany

Perioperative supplementation with a fruit and vegetable juice powder concentrate and postsurgical morbidity: a double-blind, randomised, placebo controlled clinical trial

Aims Surgical trauma leads to an inflammatory response that causes surgical morbidity. Reduced antioxidant micronutrient (AM)a levels and/or excessive levels of Reactive Oxygen Species (ROS)b have previously been linked to delayed wound healing and presence of chronic wounds. We aimed to evaluate the effect of pre-operative supplementation with encapsulated fruit and vegetable juice powder concentrate (JuicePlus+®) on postoperative morbidity and Quality of Life (QoL)c. Methods We conducted a randomised, double-blind, placebo-controlled two-arm parallel clinical trial evaluating postoperative morbidity following lower third molar surgery. Patients aged between 18 and 65 years were randomised to take verum or placebo for 10 weeks prior to surgery and during the first postoperative week. The primary endpoint was the between-group difference in QoL over the first postoperative week, with secondary endpoints being related to other measures of postoperative morbidity (pain and trismus). Results One-hundred and eighty-three out of 238 randomised patients received surgery (Intention-To-Treat population). Postoperative QoL tended to be higher in the active compared to the placebo group (p=0.059). Furthermore, reduction in mouth opening 2 days after surgery was 3.1 mm smaller (p=0.042), the mean pain score over the postoperative week was 9.4 mm lower (p=0.007) and patients were less likely to experience moderate to severe pain on postoperative day 2 (RR 0.58, p=0.030), comparing verum to placebo groups. Conclusion Pre-operative supplementation with a fruit and vegetable supplement rich in AM may improve postoperative QoL and reduce surgical morbidity and post-operative complications after surgery

Research on electric heating of metals for thermal treatment Final report

Electric heat treatment process for aluminum and titanium aluminum vanadium alloy

Submucosal diclofenac for acute postoperative pain in third molar surgery: A randomized, controlled clinical trial

Diclofenac sodium is a widely used nonsteroidal anti-inflammatory drug (NSAID) for relief of inflammatory pain. A recent formulation combines this drug with hydroxypropyl-β-cyclodextrin (HPβCD) to improve its solubility and to enable subcutaneous administration. Previous studies confirmed the efficacy of this combination. This study’s aim was to evaluate the efficacy, safety, and local tolerability of diclofenac HPβCD administered as a local submucosal injection prior to lower third molar surgery. We conducted a prospective, randomized, double-blind, placebo-controlled, parallel-group phase II single-center study. Seventy-five patients requiring mandibular third molar surgery were randomized into 1 of 5 groups: 5 mg/1 mL diclofenac HPβCD, 12.5 mg/1 mL diclofenac HPβCD, 25 mg/1 mL diclofenac HPβCD, 50 mg/1 mL diclofenac HPβCD, or 1 mL placebo. The respective study drug was injected into the mucosal tissue surrounding the surgical site prior to surgery following achievement of local anesthesia. The primary outcome measure was the area under the curve (AUC) of cumulative pain scores from end of surgery to 6 h postsurgery. This demonstrated a global treatment effect between the active groups and placebo, hence confirming the study drug’s efficacy (P = 0.0126). Secondary outcome measures included the time until onset of pain and the time until patients required rescue medication, both showing statistical significance of the study drug compared to placebo (P < 0.0161 and P < 0.0001, respectively). The time until rescue medication ranged between 7.8 h (for 25 mg/1 mL diclofenac HPβCD) and 16 h (for 50 mg/1 mL diclofenac HPβCD). Interestingly, the 5-mg/1-mL solution appeared superior to the 12.5-mg/1-mL and 25-mg/1-mL solutions (time until rescue medication = 12.44 h). A total of 14% of patients experienced minor adverse drug reactions (ADRs), of which 2 cases demonstrated flap necrosis. These resolved without further intervention. The study results overall indicate efficacy, safety, and relative tolerability of diclofenac HPβCD used locally as a submucosal injection prior to third molar surgery (ClinicalTrials.gov NCT01706588)

Hydrogen atom in a spherical well: linear approximation

We discuss the boundary effects on a quantum system by examining the problem of a hydrogen atom in a spherical well. By using an approximation method which is linear in energy we calculate the boundary corrections to the ground-state energy and wave function. We obtain the asymptotic dependence of the ground-state energy on the radius of the well.Comment: Revised version to appear in European Journal of Physic

Determination of total and available fractions of PAHs by SPME in oily wastewaters : overcoming interference from NAPL and NOM

Background, aim, and scope Polycyclic aromatic hydrocarbons (PAHs) are often found in oily wastewaters. Their presence is usually the result of human activities and has a negative effect on the environment. One important step in addressing this problem is to evaluate the effectiveness of PAH removal by biological processes since these are the most cost-effective treatments known today. Many techniques are presently available for PAH determination in wastewaters. Solid phase microextracion (SPME) is known to be one of the most effective techniques for this purpose. When analyzing complex matrices with substances such as natural organic matter (NOM) and non-aqueous phase liquids (NAPL), it is important to differentiate the free dissolved PAH from matrix-bonded PAH. PAHs associated with the bonded fraction are less susceptible to biological treatment. The present study concerns the development of a simple and suitable methodology for the determination of the freely dissolved and the total fraction of PAHs present in oily wastewaters. The methodology was then applied to an oily wastewater from a fuel station retention basin. Material and methods Headspace SPME was used for analyzing PAH since the presence of a complex or dirty matrix in direct contact with the fiber may damage it. Four model PAHs—anthracene, fluorene, phenanthrene, and pyrene—were analyzed by GC-MS. Negligible depletion SPME technique was used to determine the free fraction. Total PAH was determined by enhancing the mass transfer from the bonded phase to the freely dissolved phase by temperature optimization and the use of the method of standard additions. The PAH absorption kinetics were determined in order to define the optimal sampling conditions for this method. The fitting of the experimental data to a mathematical model was accomplished using Berkeley Madonna software. Humic acid and silicon oil were used as model NOM and NAPL, respectively, to study the effect of these compounds on the decrease of SPME response. Then, the method was evaluated with wastewater from a fuel station spill retention basin. Results The SPME kinetic parameters—k 1 (uptake rate), k 2 (desorption rate), and K SPME (partition coefficient)—were determined from experimental data modeling. The determination of the free fraction required 15-min sampling to ensure that PAH depletion from sample was below 1%. For total PAH, a 30-min extraction at 100°C ensured the maximum signal response in the GC-MS. For the determination of free and total PAHs, extractions were performed before reaching the SPME equilibrium. The wastewater used in this study had no free fraction of the analyzed PAHs. However, the four studied PAHs were found when the method for total PAH was used. Discussion The addition of NOM and NAPL dramatically decreased the efficiency of the SPME. This decrease was the result of a greater partition of the PAHs to the NAPL and NOM phases. This fact was also observed in the analysis of the fuel station spill retention basin, where no free PAH was measured. However, using the method of standard addition for the determination of total PAH, it was possible to quantify all four PAHs. Conclusions The method developed in the present study was found to be adequate to differentiate between free and total PAH present in oily wastewater. It was determined that the presence of NOM and NAPL had a negative effect on SPME efficiency. Recommendations and perspectives The presence of binding substances had a great influence on SPME kinetics. Therefore, it is of extreme importance to determine their degree of interference when analyzing oily wastewaters or results can otherwise be erroneous. Other factors influencing the total PAH determinations should be considered in further studies.Fundação para a Ciência e a Tecnologia (FCT) - SFRH/BD/ 18816/2004, POCI/AMB/61044/200

Economic study of the participation of multiple energy resources in grid services markets

This paper presents a method to analyze the technical and economic potential of combining different types of resources to provide grid services, with a particular focus on battery systems. The paper proposes a modelling paradigm where resources are described with few key operational parameters and describes a control architecture to co-operate the combination of resources to offer fast grid services, taking as an example the provision of secondary frequency control in the Swiss market. A sensitivity analysis is reported that highlights the ability of the combination of energy resources to provide grid services as a function of their technical characteristics