Laser powder bed fusion of a superelastic Cu-Al-Mn shape memory alloy

Dense and crack-free specimens of the shape memory alloy Cu71.6Al17Mn11.4 (at.%) were produced via laser powder bed fusion across a wide range of process parameters. The microstructure, viz. grain size, can be directly tailored within the process and with it the transformation temperatures (TTs) shifted to higher values by raising the energy input. The microstructure, and the superelastic behavior of additively manufactured samples were assessed by a detailed comparison with induction melted material. The precipitation of the α phase, which inhibit the martensitic transformation, were not observed in the additively manufactured samples owing to the high intrinsic cooling rates during the fabrication process. Fine columnar grains with a strong [001]-texture along the building direction lead to an enhanced yield strength compared to the coarse-grained cast samples. A maximum recoverable strain of 2.86% was observed after 5% compressive loading. The first results of our approach imply that laser powder bed fusion is a promising technique to directly produce individually designed Cu-Al-Mn shape memory parts with a pronounced superelasticity at room temperature

Additive Manufacturing of Binary Ni–Ti Shape Memory Alloys Using Electron Beam Powder Bed Fusion: Functional Reversibility Through Minor Alloy Modification and Carbide Formation

Shape memory alloys (SMAs), such as Ni–Ti, are promising candidates for actuation and damping applications. Although processing of Ni–Ti bulk materials is challenging, well-established processing routes (i.e. casting, forging, wire drawing, laser cutting) enabled application in several niche applications, e.g. in the medical sector. Additive manufacturing, also referred to as 4D-printing in this case, is known to be highly interesting for the fabrication of SMAs in order to produce near-net-shaped actuators and dampers. The present study investigated the impact of electron beam powder bed fusion (PBF-EB/M) on the functional properties of C-rich Ni50.9Ti49.1 alloy. The results revealed a significant loss of Ni during PBF-EB/M processing. Process microstructure property relationships are discussed in view of the applied master alloy and powder processing route, i.e. vacuum induction-melting inert gas atomization (VIGA). Relatively high amounts of TiC, being already present in the master alloy and powder feedstock, are finely dispersed in the matrix upon PBF-EB/M. This leads to a local change in the chemical composition (depletion of Ti) and a pronounced shift of the transformation temperatures. Despite the high TiC content, superelastic testing revealed a good shape recovery and, thus, a negligible degradation in both, the as-built and the heat-treated state

Phase Formation, Thermal Stability and Mechanical Properties of a Cu-Al-Ni-Mn Shape Memory Alloy Prepared by Selective Laser Melting

Selective laser melting (SLM) is an additive manufacturing process used to produce parts with complex geometries layer by layer. This rapid solidification method allows fabricating samples in a non-equilibrium state and with refined microstructure. In this work, this method is used to fabricate 3 mm diameter rods of a Cu-based shape memory alloy. The phase formation, thermal stability and mechanical properties were investigated and correlated. Samples with a relative density higher than 92% and without cracks were obtained. A single monoclinic martensitic phase was formed with average grain size ranging between 28 to 36 μm. The samples exhibit a reverse martensitic transformation temperature around 106 ± 2 °C and a large plasticity in compression (around 15±1%) with a typical “double-yielding” behaviour

Expression patterns of angiogenic and lymphangiogenic factors in ductal breast carcinoma in situ

The objective of this study was to investigate expression of various growth factors associated with angiogenesis and lymphangiogenesis and of their receptors in ductal carcinomas in situ of the breast (DCIS). We studied protein expression of basic fibroblast growth factor (bFGF), vascular endothelial growth factor (VEGF)-A, endothelin (ET)-1, and VEGF-C, and their receptors bFGF-R1, Flt-1, KDR, ETAR, ETBR, and Flt-4 immunohistochemically in 200 DCIS (pure DCIS: n=96; DCIS adjacent to an invasive component: n=104) using self-constructed tissue microarrays. Basic fibroblast growth factor-R1, VEGF-C, Flt-4, and ETAR were expressed in the tumour cells in the majority of cases, whereas bFGF and Flt-1 expression was rarely observed. VEGF-A, KDR, ET-1, and ETBR were variably expressed. The findings of VEGF-C and its receptor Flt-4 as lymphangiogenic factors being expressed in tumour cells of nearly all DCIS lesions and the observed expression of various angiogenic growth factors in most DCIS suggest that in situ carcinomas are capable of inducing angiogenesis and lymphangiogenesis. Moreover, we found a higher angiogenic activity in pure DCIS as compared to DCIS with concomitant invasive carcinoma. This association of angiogenic factors with pure DCIS was considerably more pronounced in the subgroup of non-high-grade DCIS (n=103) as compared with high-grade DCIS (n=94). Determination of these angiogenic markers may therefore facilitate discrimination between biologically different subgroups of DCIS and could help to identify a particularly angiogenic subset with a potentially higher probability of recurrence or of progression to invasiveness. For these DCIS, targeting angiogenesis may represent a feasible therapeutic approach for prevention of progression of DCIS to invasion

Atomization and Selective Laser Melting of a Cu-Al-Ni-Mn Shape Memory Alloy

Shape memory alloys (SMAs) are a class of material that undergoes a reversible shape change after a plastic deformation. The recovery of the original shape is possible due to a structural transformation upon heating to a critical temperature. The shape memory effect is related to a martensitic-austenitic transformation from a phase with a low symmetry (martensite) to a high-temperature phase (parent phase) [1]. Cu-based shape memory alloys have the advantage of large thermal and electrical conductivities and the system Cu-Al-Ni alloys are quite attractive due to better stabilisation against aging phenomena [2].</jats:p