Characterisation of the muon beams for the Muon Ionisation Cooling Experiment

A novel single-particle technique to measure emittance has been developed and used to characterise seventeen different muon beams for the Muon Ionisation Cooling Experiment (MICE). The muon beams, whose mean momenta vary from 171 to 281 MeV/c, have emittances of approximately 1.2–2.3 π mm-rad horizontally and 0.6–1.0 π mm-rad vertically, a horizontal dispersion of 90–190 mm and momentum spreads of about 25 MeV/c. There is reasonable agreement between the measured parameters of the beams and the results of simulations. The beams are found to meet the requirements of MICE

The development of a superconducting undulator for the ILC positron source.

The ILC positron source relies upon a ~200 m long superconducting helical undulator in order to generate the huge flux of gamma photons required. The period is only 11.5 mm but the field strength is ~1 T. The UK is building and testing a full scale 4 m long ILC cryomodule at the moment. It will be completed in 2008 and the results used to demonstrate the feasibility of the full (200 m long) syste

Intercalibration of the barrel electromagnetic calorimeter of the CMS experiment at start-up

Calibration of the relative response of the individual channels of the barrel electromagnetic calorimeter of the CMS detector was accomplished, before installation, with cosmic ray muons and test beams. One fourth of the calorimeter was exposed to a beam of high energy electrons and the relative calibration of the channels, the intercalibration, was found to be reproducible to a precision of about 0.3%. Additionally, data were collected with cosmic rays for the entire ECAL barrel during the commissioning phase. By comparing the intercalibration constants obtained with the electron beam data with those from the cosmic ray data, it is demonstrated that the latter provide an intercalibration precision of 1.5% over most of the barrel ECAL. The best intercalibration precision is expected to come from the analysis of events collected in situ during the LHC operation. Using data collected with both electrons and pion beams, several aspects of the intercalibration procedures based on electrons or neutral pions were investigated

Electron-muon ranger: performance in the MICE muon beam

The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100–280 MeV/c

Electron-muon ranger: performance in the MICE muon beam

The Muon Ionization Cooling Experiment (MICE) will perform a detailed study of ionization cooling to evaluate the feasibility of the technique. To carry out this program, MICE requires an efficient particle-identification (PID) system to identify muons. The Electron-Muon Ranger (EMR) is a fully-active tracking-calorimeter that forms part of the PID system and tags muons that traverse the cooling channel without decaying. The detector is capable of identifying electrons with an efficiency of 98.6%, providing a purity for the MICE beam that exceeds 99.8%. The EMR also proved to be a powerful tool for the reconstruction of muon momenta in the range 100–280 MeV/c

Pion contamination in the MICE muon beam

The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam is designed to deliver a beam of muons with less than $\sim$1\% contamination. To make the final muon selection, MICE employs a particle-identification (PID) system upstream and downstream of the cooling cell. The PID system includes time-of-flight hodoscopes, threshold-Cherenkov counters and calorimetry. The upper limit for the pion contamination measured in this paper is $f_\pi < 1.4\%$ at 90\% C.L., including systematic uncertainties. Therefore, the MICE Muon Beam is able to meet the stringent pion-contamination requirements of the study of ionization cooling.Department of Energy and National Science Foundation (U.S.A.), the Instituto Nazionale di Fisica Nucleare (Italy), the Science and Technology Facilities Council (U.K.), the European Community under the European Commission Framework Programme 7 (AIDA project, grant agreement no. 262025, TIARA project, grant agreement no. 261905, and EuCARD), the Japan Society for the Promotion of Science and the Swiss National Science Foundation, in the framework of the SCOPES programme

Behavioral and social drivers of COVID-19 vaccination initiation in the US: a longitudinal study March─ October 2021

Many studies have examined behavioral and social drivers of COVID-19 vaccination initiation, but few have examined these drivers longitudinally. We sought to identify the drivers of COVID-19 vaccination initiation using the Behavioral and Social Drivers of Vaccination (BeSD) Framework. Participants were a nationally-representative sample of 1,563 US adults who had not received a COVID-19 vaccine by baseline. Participants took surveys online at baseline (spring 2021) and follow-up (fall 2021). The surveys assessed variables from BeSD Framework domains (i.e., thinking and feeling, social processes, and practical issues), COVID-19 vaccination initiation, and demographics at baseline and follow-up. Between baseline and follow-up, 65% of respondents reported initiating COVID-19 vaccination. Vaccination intent increased from baseline to follow-up (p &lt; .01). Higher vaccine confidence, more positive social norms towards vaccination, and receiving vaccine recommendations at baseline predicted subsequent COVID-19 vaccine initiation (all p &lt; .01). Among factors assessed at follow-up, social responsibility and vaccine requirements had the greatest associations with vaccine initiation (all p &lt; .01). Baseline vaccine confidence, social norms, and vaccination recommendations were associated with subsequent vaccine initiation, all of which could be useful targets for behavioral interventions. Furthermore, interventions that highlight social responsibility to vaccinate or promote vaccination requirements could also be beneficial

CMS physics technical design report : Addendum on high density QCD with heavy ions

Peer reviewe

Dense, fast, radiation-tolerant Fluoro-Hafnate glass scintillators for electromagnetic calorimeters in high energy physics

Over 200 different compositions of heavy metal fluoride glasses have been produced and evaluated as possible candidates for the active medium in homogeneous electromagnetic calorimeters for high energy particles. Promising glasses, based on mixtures containing hafnium fluoride, have densities of 6 g/cm^3, radiation lengths of 1.6 cm, and good optical transmission from the UV to the IR. Glasses containing the Ce3+ ion are fast scintillators, with properties similar to those of pure cerium fluoride crystal. We have made glasses which have up to 14% of the light yield of CeF3, fast scintillation characterised by typical exponential decay constants of 10 ns and 25 ns, and a temperature dependence of light yield of -0.4%/C over the range -10C to 60C. We have carried out a detailed investigation of the effects of gamma irradiation (up to doses of 6kGy) on the optical transmission, and systematic studies into the role of indium and other elements on radiation tolerance and light yield. Some glasses have shown complete optical annealing of radiation-induced absorbance when exposed to UV light.PPAR