Domains in Melts of Comb-Coil Diblock Copolymers: Superstrong Segregation Regime

Conditions for the crossover from the strong to the superstrong segregation regime are analyzed for the case of comb-coil diblock copolymers. It is shown that the critical interaction energy between the components required to induce the crossover to the superstrong segregation regime is inversely proportional to mb = 1 + n/m, where n is the degree of polymerization of the side chain and m is the distance between successive grafting points. As a result, the superstrong segregation regime, being rather rare in the case of ordinary block copolymers, has a much better chance to be realized in the case of diblock copolymers with combs grafted to one of the blocks.

Self-Assembly of Supramolecular Triblock Copolymer Complexes

Four different poly(tert-butoxystyrene)-b-polystyrene-b-poly(4-vinylpyridine) (PtBOS-b-PS-b-P4VP) linear triblock copolymers, with the P4VP weight fraction varying from 0.08 to 0.39, were synthesized via sequential anionic polymerization. The values of the unknown interaction parameters between styrene and tert-butoxystyrene and between tert-butoxystyrene and 4-vinylpyridine were determined from random copolymer blend miscibility studies and found to satisfy 0.031<χS,tBOS<0.034 and 0.39<χ4VP,tBOS<0.43, the latter being slightly larger than the known 0.30<χS,4VP≤0.35 value range. All triblock copolymers synthesized adopted a P4VP/PS core/shell cylindrical self-assembled morphology. From these four triblock copolymers supramolecular complexes were prepared by hydrogen bonding a stoichiometric amount of pentadecylphenol (PDP) to the P4VP blocks. Three of these complexes formed a triple lamellar ordered state with additional short length scale ordering inside the P4VP(PDP) layers. The self-assembled state of the supramolecular complex based on the triblock copolymer with the largest fraction of P4VP consisted of alternating layers of PtBOS and P4VP(PDP) layers with PS cylinders inside the latter layers. The difference in morphology between the triblock copolymers and the supramolecular complexes is due to two effects: (i) a change in effective composition and, (ii) a reduction in interfacial tension between the PS and P4VP containing domains. The small angle X-ray scattering patterns of the supramolecules systems are very temperature sensitive. A striking feature is the disappearance of the first order scattering peak of the triple lamellar state in certain temperature intervals, while the higher order peaks (including the third order) remain. This is argued to be due to the thermal sensitivity of the hydrogen bonding and thus directly related to the very nature of these systems.

Green areas around homes reduce atopic sensitization in children

Peer reviewe

Nanosheet formation by an anionic surfactant-like peptide and modulation of self-assembly through ionic complexation

The surfactant-like peptide (Ala)6-(Asp) (A6D) is shown to self-assemble into ultrathin (3 nm thick) nanosheets in aqueous solution above a critical aggregation concentration. A combination of circular dichroism and FTIR spectroscopy and X-ray diffraction shows that the nanosheets comprise interdigitated bilayers of the peptide with β-sheet conformation. The self-assembly can be modulated by addition of hexamethylenediamine which is expected to interact with the anionic C terminus (and C-terminal D residue) of the peptide. Multiple ordered nanostructures can be accessed depending on the amount of added diamine. Nanosheet and bicontinuous network structures were observed using cryogenic-TEM and small-angle X-ray scattering. Addition of hexamethylenediamine at a sufficiently large molar ratio leads to disruption of the ordered nanostructure and the formation of a solution of A6D–diamine molecular complexes with highly charged end groups. The multiple acid-functionalized nanostructures that are accessible in this system are expected to have many applications in the fabrication of new nanomaterials

Self-assembly of the toll-like receptor agonist macrophage-activating lipopeptide MALP-2 and of its constituent peptide

The self-assembly of the macrophage-activating lipopeptide MALP-2 in aqueous solution has been investigated and is compared to that of the constituent peptide GNNDESNISFKEK. MALP-2 is a toll-like receptor agonist lipopeptide with diverse potential biomedical applications and its self-assembly has not previously been examined. It is found to self-assemble, above a critical aggregation concentration (cac), into remarkable “fibre raft” structures, based on lateral aggregation of β-sheet based bilayer tapes. Peptide GNNDESNISFKEK also forms β-sheet structures above a cac, although the morphology is distinct, comprising highly extended and twisted tape structures. A detailed insight into the molecular packing within the MALP-2 raft and GNNDESNISFKEK nanotape structures is obtained through X-ray diffraction and small-angle X-ray scattering. These results point to the significant influence of the attached lipid chains on the self-assembly motif, which lead to the raft structure for the lipopeptide assemblies

Self-assembly in solution of a reversible comb-shaped supramolecular polymer

We report a single step synthesis of a polyisobutene with a bis-urea moiety in the middle of the chain. In low polarity solvents, this polymer self-assembles by hydrogen bonding to form a combshaped polymer with a central hydrogen bonded backbone and polyisobutene arms. The comb backbone can be reversibly broken, and consequently, its length can be tuned by changing the solvent, the concentration or the temperature. Moreover, we have proved that the bulkiness of the side-chains have a strong influence on both the self-assembly pattern and the length of the backbone. Finally, the density of arms can be reduced, by simply mixing with a low molar mass bis-urea

Self-assembly of telechelic tyrosine end-capped PEO and poly(alanine) polymers in aqueous solution

The self-assembly in aqueous solution of three novel telechelic conjugates comprising a central hydrophilic polymer and short (trimeric or pentameric) tyrosine end-caps has been investigated. Two of the conjugates have a central poly(oxyethylene) (polyethylene oxide, PEO) central block with different molar masses. The other conjugate has a central poly(l-alanine) (PAla) sequence in a purely amino-acid based conjugate. All three conjugates self-assemble into β-sheet based fibrillar structures, although the fibrillar morphology revealed by cryogenic-TEM is distinct for the three polymers—in particular the Tyr5-PEO6k-Tyr5 forms a population of short straight fibrils in contrast to the more diffuse fibril aggregates observed for Tyr5-PEO2k-Tyr5 and Tyr3-PAla-Tyr3. Hydrogel formation was not observed for these samples (in contrast to prior work on related systems) up to quite high concentrations, showing that it is possible to prepare solutions of peptide–polymer-peptide conjugates with hydrophobic end-caps without conformational constraints associated with hydrogelation. The Tyr5-PEO6k-Tyr5 shows significant PEO crystallization upon drying in contrast to the Tyr5-PEO2k-Tyr5 conjugate. Our findings point to the remarkable ability of short hydrophobic peptide end groups to modulate the self-assembly properties of polymers in solution in model peptide-capped “associative polymers”. Retention of fluidity at high conjugate concentration may be valuable in potential future applications of these conjugates as bioresponsive or biocompatible materials, for example exploiting the enzyme-responsiveness of the tyrosine end-group

A chieftain’s colourful garments:Microinvasive analysis of Norwegian Snartemo V textiles

Several microinvasive methods were applied to analyse the fibre materials from the Snartemo V burial from the Migration Period (fifth century CE) in Norway. The morphological parameters of the textile fibres and furs were examined with optical (TLM) and electron microscopy (SEM, SEM-EDX and TEM) and dyes with UHPLC-PDA method. According to TLM and TEM analyses, the Snartemo textiles were spun of very fine wool, that consisted of white and naturally pigmented fibres. The dye analysis revealed colourants referring to dyer’s madder, weld and woad in several textiles. The reddish hue in the warp of the wide geometrically patterned tablet-woven band was interpreted a result of the fading of the natural dark pigmentation of the wool. Respectively, the warp yarns that now appear yellow were interpreted as originally white, undyed wool. In addition, fibres from a bear’s (Ursus arctos) fur and a Mustelidae sp. were identified in the previously unexamined Snartemo materials

A chieftain’s colourful garments:Microinvasive analysis of Norwegian Snartemo V textiles

Several microinvasive methods were applied to analyse the fibre materials from the Snartemo V burial from the Migration Period (fifth century CE) in Norway. The morphological parameters of the textile fibres and furs were examined with optical (TLM) and electron microscopy (SEM, SEM-EDX and TEM) and dyes with UHPLC-PDA method. According to TLM and TEM analyses, the Snartemo textiles were spun of very fine wool, that consisted of white and naturally pigmented fibres. The dye analysis revealed colourants referring to dyer’s madder, weld and woad in several textiles. The reddish hue in the warp of the wide geometrically patterned tablet-woven band was interpreted a result of the fading of the natural dark pigmentation of the wool. Respectively, the warp yarns that now appear yellow were interpreted as originally white, undyed wool. In addition, fibres from a bear’s (Ursus arctos) fur and a Mustelidae sp. were identified in the previously unexamined Snartemo materials

Tuning chelation by the surfactant-like peptide A6H using predetermined pH values

We examine the self-assembly of a peptide A6H comprising a hexa-alanine sequence A6 with a histidine (H) “head group”, which chelates Zn2+ cations. We study the self assembly of A6H and binding of Zn2+ ions in ZnCl2 solutions, under acidic and neutral conditions. A6H self-assembles into nanotapes held together by a β-sheet structure in acidic aqueous solutions. By dissolving A6H in acidic ZnCl2 solutions, the carbonyl oxygen atoms in A6H chelate the Zn2+ ions and allow for β-sheet formation at lower concentrations, consequently reducing the onset concentration for nanotape formation. A6H mixed with water or ZnCl2 solutions under neutral conditions produces short sheets or pseudocrystalline tapes, respectively. The imidazole ring of A6H chelates Zn2+ ions in neutral solutions. The internal structure of nanosheets and pseudocrystalline sheets in neutral solutions is similar to the internal structure of A6H nanotapes in acidic solutions. Our results show that it is possible to induce dramatic changes in the self-assembly and chelation sites of A6H by changing the pH of the solution. However, it is likely that the amphiphilic nature of A6H determines the internal structure of the self-assembled aggregates independent from changes in chelation