Interpreting Helioseismic Structure Inversion Results of Solar Active Regions

Helioseismic techniques such as ring-diagram analysis have often been used to determine the subsurface structural differences between solar active and quiet regions. Results obtained by inverting the frequency differences between the regions are usually interpreted as the sound-speed differences between them. These in turn are used as a measure of temperature and magnetic-field strength differences between the two regions. In this paper we first show that the "sound-speed" difference obtained from inversions is actually a combination of sound-speed difference and a magnetic component. Hence, the inversion result is not directly related to the thermal structure. Next, using solar models that include magnetic fields, we develop a formulation to use the inversion results to infer the differences in the magnetic and thermal structures between active and quiet regions. We then apply our technique to existing structure inversion results for different pairs of active and quiet regions. We find that the effect of magnetic fields is strongest in a shallow region above 0.985R_sun and that the strengths of magnetic-field effects at the surface and in the deeper (r < 0.98R_sun) layers are inversely related, i.e., the stronger the surface magnetic field the smaller the magnetic effects in the deeper layers, and vice versa. We also find that the magnetic effects in the deeper layers are the strongest in the quiet regions, consistent with the fact that these are basically regions with weakest magnetic fields at the surface. Because the quiet regions were selected to precede or follow their companion active regions, the results could have implications about the evolution of magnetic fields under active regions.Comment: Accepted for publication in Solar Physic

Tomato: a crop species amenable to improvement by cellular and molecular methods

Tomato is a crop plant with a relatively small DNA content per haploid genome and a well developed genetics. Plant regeneration from explants and protoplasts is feasable which led to the development of efficient transformation procedures. In view of the current data, the isolation of useful mutants at the cellular level probably will be of limited value in the genetic improvement of tomato. Protoplast fusion may lead to novel combinations of organelle and nuclear DNA (cybrids), whereas this technique also provides a means of introducing genetic information from alien species into tomato. Important developments have come from molecular approaches. Following the construction of an RFLP map, these RFLP markers can be used in tomato to tag quantitative traits bred in from related species. Both RFLP's and transposons are in the process of being used to clone desired genes for which no gene products are known. Cloned genes can be introduced and potentially improve specific properties of tomato especially those controlled by single genes. Recent results suggest that, in principle, phenotypic mutants can be created for cloned and characterized genes and will prove their value in further improving the cultivated tomato.

Exploring the stability of super heavy elements: First measurement of the fission barrier of 254No

The gamma-ray multiplicity and total energy emitted by the heavy nucleus 254No have been measured at 2 different beam energies. From these measurements, the initial distributions of spin I and excitation energy E * of 254No were constructed. The distributions display a saturation in excitation energy, which allows a direct determination of the fission barrier. 254No is the heaviest shell-stabilized nucleus with a measured fission barrier. © Owned by the authors, published by EDP Sciences, 2014

Report from the fifth international consensus meeting to harmonize core outcome measures for atopic eczema/dermatitis clinical trials (HOME initiative)

This is the report from the fifth meeting of the Harmonising Outcome Measures for Eczema initiative (HOME V). The meeting was held on 12–14 June 2017 in Nantes, France, with 81 participants. The main aims of the meeting were (i) to achieve consensus over the definition of the core domain of long-term control and how to measure it and (ii) to prioritize future areas of research for the measurement of the core domain of quality of life (QoL) in children. Moderated whole-group and small-group consensus discussions were informed by presentations of qualitative studies, systematic reviews and validation studies. Small-group allocations were performed a priori to ensure that each group included different stakeholders from a variety of geographical regions. Anonymous whole-group voting was carried out using handheld electronic voting pads according to predefined consensus rules. It was agreed by consensus that the long-term control domain should include signs, symptoms, quality of life and a patient global instrument. The group agreed that itch intensity should be measured when assessing long-term control of eczema in addition to the frequency of itch captured by the symptoms domain. There was no recommendation of an instrument for the core outcome domain of quality of life in children, but existing instruments were assessed for face validity and feasibility, and future work that will facilitate the recommendation of an instrument was agreed upon. The Harmonising Outcome Measures for Eczema (HOME) initiative is an international group working together to develop a core outcome set (COS) for clinical trials in eczema (synonymous with atopic eczema and atopic dermatitis). HOME is coordinated from the Centre of Evidence Based Dermatology, University of Nottingham, U.K. Participation in HOME is open to anyone with an interest in outcomes for eczema. A COS is the agreed upon minimum set of instruments that should be included in all clinical trials for a particular condition. Use of a COS does not preclude using other instruments; other domains and instruments can also be included to meet the specific requirements of individual trials. COS initiatives are active across many fields of medicine and should enable better synthesis of trial data and reduce selective outcome reporting bias. The HOME initiative follows the best current guidance on developing a COS. Four core domains have been identified: clinician-reported signs; patient-reported symptoms; quality of life; and long-term control. The core outcome measurement instruments for clinician-reported signs and patient-reported symptoms have been established: the Eczema Area and Severity Index (EASI) for measuring clinician reported signs was agreed on at the HOME III meeting, and the Patient-Oriented Eczema Measure (POEM) was chosen to measure patient-reported symptoms at the HOME IV meeting. This is a report from the fifth consensus meeting of the HOME initiative (HOME V), which was held on 12–14 June 2017 in Nantes, France. The local organizers were Sebastien Barbarot and Jean-Francois Stalder of Nantes University Hospital, France

Pion contamination in the MICE muon beam

The international Muon Ionization Cooling Experiment (MICE) will perform a systematic investigation of ionization cooling with muon beams of momentum between 140 and 240\,MeV/c at the Rutherford Appleton Laboratory ISIS facility. The measurement of ionization cooling in MICE relies on the selection of a pure sample of muons that traverse the experiment. To make this selection, the MICE Muon Beam is designed to deliver a beam of muons with less than $\sim$1\% contamination. To make the final muon selection, MICE employs a particle-identification (PID) system upstream and downstream of the cooling cell. The PID system includes time-of-flight hodoscopes, threshold-Cherenkov counters and calorimetry. The upper limit for the pion contamination measured in this paper is $f_\pi < 1.4\%$ at 90\% C.L., including systematic uncertainties. Therefore, the MICE Muon Beam is able to meet the stringent pion-contamination requirements of the study of ionization cooling.Department of Energy and National Science Foundation (U.S.A.), the Instituto Nazionale di Fisica Nucleare (Italy), the Science and Technology Facilities Council (U.K.), the European Community under the European Commission Framework Programme 7 (AIDA project, grant agreement no. 262025, TIARA project, grant agreement no. 261905, and EuCARD), the Japan Society for the Promotion of Science and the Swiss National Science Foundation, in the framework of the SCOPES programme

Mobile inquiry-based learning with sensor-data in the school: Effects on student motivation

The paper discusses the design, implementation and evaluation of a pilot project that integrated inquiry-based learning with mobile game design and introduced mobile devices and sensors into classroom learningweSPOT Project - IST (FP7/2007-2013) under grant agreement N° 318499The project was supported by the SURFnet innovation grant for sustainable ICT solutions

Spectroscopy of neutron-deficient nuclei near the Z=82 closed shell via symmetric fusion reactions

In-beam and decay-spectroscopy studies of neutron-deficient nuclei near the Z=82 shell closure were carried out using the Fragment Mass Analyzer (FMA) and the Gammasphere array, in conjunction with symmetric fusion reactions and the Recoil Decay Tagging (RDT) technique. The primary motivation was to study properties of 179Tl and 180Tl, and their daughter, and grand-daughter isotopes. For the first time, in-beam structures associated with 179Tl and 180Tl were observed, as well as γ rays associated with the 180Tl α decay. No long-lived isomer was identified in 180Tl, in contrast with the known systematics for the heavier odd-odd Tl isotopes

Core excitations beyond maximally aligned configurations in 123I

High-spin states in 123I have been populated in the 80Se(48Ca,p4n)123I reaction at 207 MeV and γ-ray coincidence events have been recorded with the Gammasphere spectrometer. The level scheme of 123I has been extended up to spin I=63/2. The nucleus undergoes a shape transition from moderately deformed states with collective rotation at low spins to noncollective oblate configurations at higher spins. Maximally aligned terminating states involving all nine particles outside the 114Sn core and states with one particle antialigned are identified. A large number of weak transitions feed the terminating states. Cranked Nilsson-Strutinsky calculations have been performed to determine possible configurations for the observed energy levels

Evolution of collective and noncollective structures in Xe 123

An experiment involving a heavy-ion-induced fusion-evaporation reaction was carried out where high-spin states of Xe123 were populated in the Se80(Ca48,5n)Xe123 reaction at 207 MeV beam energy. Gamma-ray coincidence events were recorded with the Gammasphere Ge detector array. The previously known level scheme was confirmed and enhanced with the addition of five new band structures and several interband transitions. Cranked Nilsson-Strutinsky (CNS) calculations were performed and compared with the experimental results in order to assign configurations to the bands

Collective and noncollective states in 120Te

High-spin states in 120Te were populated in the reaction 80Se(48Ca, α4n)120Te at a beam energy of 207 MeV and γ-ray coincidences were measured using the Gammasphere spectrometer. The previously known level scheme is extended to higher spin and new interband transitions and side-feeding branches are established. Five highly deformed rotational bands, extending up to almost I=50, are observed for the first time. The bands are compared with similar structures found recently in neighboring nuclei. The experimental results are interpreted within the framework of the cranked Nilsson-Strutinsky model. Configuration assignments to several terminating states and to the high-spin bands are discussed