A longitudinal study of muscle rehabilitation in the lower leg after cast removal using magnetic resonance imaging and strength assessment

Magnetic resonance imaging (MRI) was used to investigate muscle rehabilitation following cast immobilization. The aim was to explore MRI as an imaging biomarker of muscle function. Sixteen patients completed an eight-week rehabilitation programme following six weeks of cast immobilization for an ankle fracture. MRI of the lower leg was performed at two-week intervals for 14 weeks. Total volume and anatomical cross-sectional areas at 70% of the distance from lateral malleolus to tibial tuberosity (ACSA) were measured for tibialis anterior (TA), medial and lateral gastrocnemius (GM and GL) and soleus (SOL). Pennation angle of muscle fascicules was measured at the same position in GM. Fractional fat/water contents and T2 relaxation times before and after exercise were calculated. Strength was measured as maximum isometric torque developed in plantar- and dorsi-flexion. Torque increased by (mean [SD]) 1.10 (0.32) N m day−1 in males, 0.74 (0.43) N m day−1 in females in plantar-flexion (0.9% of final strength per day), and 0.36 (0.15) N m day−1 in males, 0.28 (0.19) N m day−1 in females in dorsi-flexion (1.1% per day). Neither difference between males and females was significant. Volume and ACSA of muscles recovered by week 14 apart from SOL which was still 6.8% smaller (p = 0.006) than the contralateral leg. T2 peaked at the end of the cast period for TA and SOL, and at week 8 for GM before returning to baseline. Pennation angle recovered rapidly following cast removal. Quantitative MRI can generate markers of muscle biomechanics and indicates that many of these return to baseline within eight weeks of remobilization

Cannulation of the subclavian vein using real-time ultrasound guidance

Cannulation of the subclavian vein has many advantages when compared to other anatomical sites for central venous access. Difficulty in its ultrasonic visualisation, and the perceived consequent ‘higher’ complication rate, mean that this approach has fallen out of favour. This barrier, however, may now have disappeared. In this article, we discuss the indications, contraindications and complications associated with subclavian vein cannulation, and present an ultrasound-guided approach to infraclavicular subclavian cannulation

Extracellular Matrix Aggregates from Differentiating Embryoid Bodies as a Scaffold to Support ESC Proliferation and Differentiation

Embryonic stem cells (ESCs) have emerged as potential cell sources for tissue engineering and regeneration owing to its virtually unlimited replicative capacity and the potential to differentiate into a variety of cell types. Current differentiation strategies primarily involve various growth factor/inducer/repressor concoctions with less emphasis on the substrate. Developing biomaterials to promote stem cell proliferation and differentiation could aid in the realization of this goal. Extracellular matrix (ECM) components are important physiological regulators, and can provide cues to direct ESC expansion and differentiation. ECM undergoes constant remodeling with surrounding cells to accommodate specific developmental event. In this study, using ESC derived aggregates called embryoid bodies (EB) as a model, we characterized the biological nature of ECM in EB after exposure to different treatments: spontaneously differentiated and retinoic acid treated (denoted as SPT and RA, respectively). Next, we extracted this treatment-specific ECM by detergent decellularization methods (Triton X-100, DOC and SDS are compared). The resulting EB ECM scaffolds were seeded with undifferentiated ESCs using a novel cell seeding strategy, and the behavior of ESCs was studied. Our results showed that the optimized protocol efficiently removes cells while retaining crucial ECM and biochemical components. Decellularized ECM from SPT EB gave rise to a more favorable microenvironment for promoting ESC attachment, proliferation, and early differentiation, compared to native EB and decellularized ECM from RA EB. These findings suggest that various treatment conditions allow the formulation of unique ESC-ECM derived scaffolds to enhance ESC bioactivities, including proliferation and differentiation for tissue regeneration applications. © 2013 Goh et al

Caudal-dependent cell positioning directs morphogenesis of the C. elegans ventral epidermis

Strikingly, epithelial morphogenesis remains incomplete at the end of C. elegans embryonic development; newly hatched larvae undergo extensive remodelling of their ventral epidermis during the first larval stage (L1), when newly-born epidermal cells move ventrally to complete the epidermal syncytium. Prior to this remodelling, undivided lateral seam cells produce anterior adherens junction processes that are inherited by the anterior daughter cells following an asymmetric division during L1. These adherens junction processes provide the ventral migratory route for these anterior daughters. Here, we show that these processes are perturbed in pal-1/caudal mutant animals, resulting in their inheritance by posterior, seam-fated daughters. This causes aberrant migration of seam daughter cells, disrupting the ventral epidermis. Using 4D-lineaging, we demonstrate that this larval epidermal morphogenesis defect in pal-1 mutants can be traced directly back to an initial cell positioning defect in the embryo. pal-1 expression, driven by a single intronic enhancer, is required to correctly position the seam cells in embryos such that the appropriate cell junctions support the correct migratory paths of seam daughters later in development, irrespective of their fate. Thus, during ventral epithelial remodelling in C. elegans, we show that the position of migrating cells, specified by pal-1/caudal, appears to be more important than their fate in driving morphogenesis

Preservation of micro-architecture and angiogenic potential in a pulmonary acellular matrix obtained using intermittent intra-tracheal flow of detergent enzymatic treatment

Tissue engineering of autologous lung tissue aims to become a therapeutic alternative to transplantation. Efforts published so far in creating scaffolds have used harsh decellularization techniques that damage the extracellular matrix (ECM), deplete its components and take up to 5 weeks to perform. The aim of this study was to create a lung natural acellular scaffold using a method that will reduce the time of production and better preserve scaffold architecture and ECM components. Decellularization of rat lungs via the intratracheal route removed most of the nuclear material when compared to the other entry points. An intermittent inflation approach that mimics lung respiration yielded an acellular scaffold in a shorter time with an improved preservation of pulmonary micro-architecture. Electron microscopy demonstrated the maintenance of an intact alveolar network, with no evidence of collapse or tearing. Pulsatile dye injection via the vasculature indicated an intact capillary network in the scaffold. Morphometry analysis demonstrated a significant increase in alveolar fractional volume, with alveolar size analysis confirming that alveolar dimensions were maintained. Biomechanical testing of the scaffolds indicated an increase in resistance and elastance when compared to fresh lungs. Staining and quantification for ECM components showed a presence of collagen, elastin, GAG and laminin. The intratracheal intermittent decellularization methodology could be translated to sheep lungs, demonstrating a preservation of ECM components, alveolar and vascular architecture. Decellularization treatment and methodology preserves lung architecture and ECM whilst reducing the production time to 3 h. Cell seeding and in vivo experiments are necessary to proceed towards clinical translation

Measurement of the inclusive and dijet cross-sections of b-jets in pp collisions at sqrt(s) = 7 TeV with the ATLAS detector

The inclusive and dijet production cross-sections have been measured for jets containing b-hadrons (b-jets) in proton-proton collisions at a centre-of-mass energy of sqrt(s) = 7 TeV, using the ATLAS detector at the LHC. The measurements use data corresponding to an integrated luminosity of 34 pb^-1. The b-jets are identified using either a lifetime-based method, where secondary decay vertices of b-hadrons in jets are reconstructed using information from the tracking detectors, or a muon-based method where the presence of a muon is used to identify semileptonic decays of b-hadrons inside jets. The inclusive b-jet cross-section is measured as a function of transverse momentum in the range 20 < pT < 400 GeV and rapidity in the range |y| < 2.1. The bbbar-dijet cross-section is measured as a function of the dijet invariant mass in the range 110 < m_jj < 760 GeV, the azimuthal angle difference between the two jets and the angular variable chi in two dijet mass regions. The results are compared with next-to-leading-order QCD predictions. Good agreement is observed between the measured cross-sections and the predictions obtained using POWHEG + Pythia. MC@NLO + Herwig shows good agreement with the measured bbbar-dijet cross-section. However, it does not reproduce the measured inclusive cross-section well, particularly for central b-jets with large transverse momenta.Comment: 10 pages plus author list (21 pages total), 8 figures, 1 table, final version published in European Physical Journal

Use of a fluorescence-based approach to assess short-term responses of the alga Pseudokirchneriella subcapitata to metal stress

This work explores the use of fluorescent probes to evaluate the responses of the green alga Pseudokirchneriella subcapitata to the action of three nominal concentrations of Cd(II), Cr(VI), Cu(II) and Zn(II) for a short time (6 h). The toxic effect of the metals on algal cells was monitored using the fluorochromes SYTOX Green (SG, membrane integrity), fluorescein diacetate (FDA, esterase activity) and rhodamine 123 (Rh123, mitochondrial membrane potential). The impact of metals on chlorophyll a (Chl a) autofluorescence was also evaluated. Esterase activity was the most sensitive parameter. At the concentrations studied, all metals induced the loss of esterase activity. SG could be used to effectively detect the loss of membrane integrity in algal cells exposed to 0.32 or 1.3 mol L1 Cu(II). Rh123 revealed a decrease in the mitochondrial membrane potential of algal cells exposed to 0.32 and 1.3 mol L1 Cu(II), indicating that mitochondrial activity was compromised. Chl a autofluorescence was also affected by the presence of Cr(VI) and Cu(II), suggesting perturbation of photosynthesis. In conclusion, the fluorescence-based approach was useful for detecting the disturbance of specific cellular characteristics. Fluorescent probes are a useful diagnostic tool for the assessment of the impact of toxicants on specific targets of P. subcapitata algal cells.The authors thank the FCT Strategic Project PEst-OE/EQB/LA0023/2013. Manuela D. Machado gratefully acknowledges the post-doctoral grant from FCT (SFRH/BPD/72816/2010)