Serum lipid and apolipoprotein distributions in Hong Kong Chinese

STUDY OBJECTIVE--The aim was to describe the distribution of lipids and apolipoproteins in the Chinese population in Hong Kong. DESIGN--This was a prospective, cross sectional, population based survey. SETTINGS--The study was conducted in a single, self referred, out patient screening centre. PARTICIPANTS--Altogether 825 Chinese adults aged > or = 20 years were screened. One hundred subjects who had previously had lipid measurement and 29 who were taking lipid modifying drugs were excluded but 289 men and 407 women remained for further analysis. MAIN RESULTS--Age standardised mean (SEM) lipids concentrations for Hong Kong Chinese were total cholesterol: men, 5.48 (0.05) mmol/l and women, 5.46 (0.06) mmol/l; triglycerides: men, 1.22 (1.03) mmol/l and women, 1.00 (1.03) mmol/l; high density lipoprotein (HDL) cholesterol: men, 1.25 (0.02) mmol/l and women, 1.42 (0.02) mmol/l; low density lipoprotein (LDL) cholesterol: men, 3.56 (0.05) mmol/l and women, 3.50 (0.06) mmol/l; apolipoprotein A-I (apo A-I): men, 1.34 (0.01) g/l and women, 1.46 (0.01) g/l; and apolipoprotein B (apo B): men, 1.15 (0.02) g/l and women, 1.06 (0.02) g/l. The total to HDL cholesterol ratios were men, 4.62 (0.07) and women, 4.10 (0.08); and apo B to apo A-I ratios (apo B/A) were men, 0.88 (0.02) and women, 0.75 (0.02). While levels of total cholesterol, LDL cholesterol, apo B, triglycerides, total/HDL cholesterol, and apo B/A were positively associated with age in both sexes and were higher in men before the age 50-59 years, they rose steeply thereafter in women to cross over the levels in men. In contrast, HDL cholesterol decreased with age while apo A-I remained constant, and both were consistently higher in women than in men in all age groups. CONCLUSIONS--Hong Kong Chinese have attained lipid profiles similar to those in other developed western populations. Environmental factors seem influential in this regard. Faced with the increasing coronary mortality of recent years, there should be a major effort to reduce the cholesterol concentrations in this population.published_or_final_versio

A one-year trial of lamivudine for chronic hepatitis B

Background and Methods: In preliminary trials, lamivudine, an oral nucleoside analogue, has shown promise for the treatment of chronic hepatitis B. We conducted a one-year double-blind trial of lamivudine in 358 Chinese patients with chronic hepatitis B. The patients were randomly assigned to receive 25 mg of lamivudine (142 patients), 100 mg of lamivudine (143), or placebo (73) orally once daily. The patients underwent liver biopsies before entering the study and after completing the assigned treatment regimen. The primary end point was a reduction of at least two points in the Knodell necroinflammatory score. Results: Hepatic necroinflammatory activity improved by two points or more in 56 percent of the patients receiving 100 mg of lamivudine, 49 percent of those receiving 25 mg of lamivudine, and 25 percent of those receiving placebo (P<0.001 and P=0.001, respectively, for the comparisons of lamivudine treatment with placebo). Necroinflammatory activity worsened in 7 percent of the patients receiving 100 mg of lamivudine, 8 percent of those receiving 25 mg, and 26 percent of those receiving placebo. The 100mg dose of lamivudine was associated with a reduced progression of fibrosis (P=0.01 for the comparison with placebo) and with the highest rate of hepatitis B e antigen (HBeAg) seroconversion (loss of HBeAg, development of antibody to HBeAg, and undetectable HBV DNA) (16 percent), the greatest suppression of HBV DNA (98 percent reduction at week 52 as compared with the base-line value), and the highest rate of sustained normalization of alanine aminotransferase levels (72 percent). Ninety-six percent of the patients completed the study. The incidence of adverse events was similar in all groups, and there were few serious events. Conclusions: In a one-year study, lamivudine was associated with substantial histologic improvement in many patients with chronic hepatitis B. A daily dose of 100 mg was more effective than a daily dose of 25 mg.published_or_final_versio

Combating the COVID-19 Epidemic: Experiences from Vietnam.

The COVID-19 pandemic is spreading fast globally. Vietnam’s strict containment measures have significantly reduced the spread of the epidemic in the country. This was achieved through the use of emergency control measures in the epidemic areas and integration of resources from multiple sectors including health, mass media, transportation, education, public affairs, and defense. This paper reviews and shares specific measures for successful prevention and control of COVID-19 in Vietnam, which could provide useful learning for other countries

Cardio-metabolic risk factors and prehypertension in persons without diabetes, hypertension, and cardiovascular disease

10.1186/1471-2458-13-730BMC Public Health131

Effects of interactions between the constituents of chitosan-edible films on their physical properties

The main objective of this work was to evaluate the effect of chitosan and plasticizer concentrations and oil presence on the physical and mechanical properties of edible films. The effect of the film constituents and their in-between interactions were studied through the evaluation of permeability, opacity and mechanical properties. The effects of the studied variables (concentrations of chitosan, plasticizer and oil) were analysed according to a 2 3 factorial design. Pareto charts were used to identify the most significant factors in the studied properties (water vapour, oxygen and carbon dioxide permeability; opacity; tensile strength; elongation at break and Young's modulus). When addressing the influence of the interactions between the films' constituents on the properties above, results show that chitosan and plasticizer concentrations are the most significant factors affecting most of the studied properties, while oil incorporation has shown to be of a great importance in the particular case of transport properties (gas permeability), essentially due to its hydrophobicity. Water vapour permeability values (ranging from 1. 62 × 10 -11 to 4. 24 × 10 -11 g m -1 s -1 Pa -1) were half of those reported for cellophane films. Also the mechanical properties (tensile strength values from 0. 43 to 13. 72 MPa and elongation-at-break values from 58. 62% to 166. 70%) were in the range of those reported for LDPE and HDPE. Based on these results, we recommend the use of 1. 5% (w/w) chitosan concentration to produce films, where the oil and plasticizer proportions will have to be adjusted in a case-by-case basis according to the use intended for the material. This work provides a useful guide to the formulation of chitosan-based film-forming solutions for food packaging applications.The author MA Cerqueira is a recipient of a fellowship from Fundacao para a Ciencia e Tecnologia (FCT, SFRH/BD/23897/2005) and BWS Souza is a recipient of a fellowship from the Coordenacao Aperfeicoamento de Pessoal de Nivel Superior, Brazil (Capes, Brazil)

Approaches in biotechnological applications of natural polymers

Natural polymers, such as gums and mucilage, are biocompatible, cheap, easily available and non-toxic materials of native origin. These polymers are increasingly preferred over synthetic materials for industrial applications due to their intrinsic properties, as well as they are considered alternative sources of raw materials since they present characteristics of sustainability, biodegradability and biosafety. As definition, gums and mucilages are polysaccharides or complex carbohydrates consisting of one or more monosaccharides or their derivatives linked in bewildering variety of linkages and structures. Natural gums are considered polysaccharides naturally occurring in varieties of plant seeds and exudates, tree or shrub exudates, seaweed extracts, fungi, bacteria, and animal sources. Water-soluble gums, also known as hydrocolloids, are considered exudates and are pathological products; therefore, they do not form a part of cell wall. On the other hand, mucilages are part of cell and physiological products. It is important to highlight that gums represent the largest amounts of polymer materials derived from plants. Gums have enormously large and broad applications in both food and non-food industries, being commonly used as thickening, binding, emulsifying, suspending, stabilizing agents and matrices for drug release in pharmaceutical and cosmetic industries. In the food industry, their gelling properties and the ability to mold edible films and coatings are extensively studied. The use of gums depends on the intrinsic properties that they provide, often at costs below those of synthetic polymers. For upgrading the value of gums, they are being processed into various forms, including the most recent nanomaterials, for various biotechnological applications. Thus, the main natural polymers including galactomannans, cellulose, chitin, agar, carrageenan, alginate, cashew gum, pectin and starch, in addition to the current researches about them are reviewed in this article.. }To the Conselho Nacional de Desenvolvimento Cientfíico e Tecnológico (CNPq) for fellowships (LCBBC and MGCC) and the Coordenação de Aperfeiçoamento de Pessoal de Nvíel Superior (CAPES) (PBSA). This study was supported by the Portuguese Foundation for Science and Technology (FCT) under the scope of the strategic funding of UID/BIO/04469/2013 unit, the Project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and COMPETE 2020 (POCI-01-0145-FEDER-006684) (JAT)

Optimizing Human Synovial Fluid Preparation for Two-Dimensional Gel Electrophoresis

<p>Abstract</p> <p>Background</p> <p>Proteome analysis is frequently applied in identifying the proteins or biomarkers in knee synovial fluids (SF) that are associated with osteoarthritis and other arthritic disorders. The 2-dimensional gel electrophoresis (2-DE) is the technique of choice in these studies. Disease biomarkers usually appear in low concentrations and may be masked by high abundant proteins. Therefore, the main aim of this study was to find the most suitable sample preparation method that can optimize the expression of proteins on 2-DE gels that can be used to develop a reference proteome picture for non-osteoarthritic knee synovial fluid samples. Proteome pictures obtained from osteoarthritic knee synovial fluids can then be compared with the reference proteome pictures obtained in this study to assist us in identifying the disease biomarkers more correctly.</p> <p>Results</p> <p>The proteomic tool of 2-DE with immobilized pH gradients was applied in this study. A total of 12 2-DE gel images were constructed from SF samples that were free of osteoarthritis. In these samples, 3 were not treated with any sample preparation methods, 3 were treated with acetone, 3 were treated with 2-DE Clean-Up Kit, and 3 were treated with the combination of acetone and 2-D Clean-Up Kit prior to 2-DE analysis. Gel images were analyzed using the PDQuest Basic 8.0.1 Analytical software. Protein spots that were of interest were excised from the gels and sent for identification by mass spectrometry. Total SF total protein concentration was calculated to be 21.98 ± 0.86 mg/mL. The untreated SF samples were detected to have 456 ± 33 protein spots on 2-DE gel images. Acetone treated SF samples were detected to have 320 ± 28 protein spots, 2-D Clean-Up Kit treated SF samples were detected to have 413 ± 31 protein spots, and the combined treatment method of acetone and 2-D Clean-Up Kit was detected to have 278 ± 26 protein spots 2-DE gel images. SF samples treated with 2-D Clean-Up Kit revealed clearer presentation of the isoforms and increased intensities of the less abundant proteins of haptoglobin, apolipoprotein A-IV, prostaglandin-D synthase, alpha-1B-glycoprotein, and alpha-2-HS-glycoprotein on 2-DE gel images as compared with untreated SF samples and SF samples treated with acetone.</p> <p>Conclusions</p> <p>The acetone precipitation method and the combined treatment effect of acetone and 2-DE Clean-Up Kit are not preferred in preparing SF samples for 2-DE analysis as both protein intensities and numbers decrease significantly. On the other hand, 2-D Clean-Up Kit treated SF samples revealed clearer isoforms and higher intensities for the less abundant proteins of haptoglobin, apolipoprotein A-IV, prostaglandin-D synthase, alpha-1B-glycoprotein, and alpha-2-HS-glycoprotein on 2-DE gels. As a result, it is recommended that SF samples should be treated with protein clean up products such as 2-D Clean-Up Kit first before conducting proteomic research in searching for the relevant biomarkers associated with knee osteoarthritis.</p

Cardiovascular disease, chronic kidney disease, and diabetes mortality burden of cardiometabolic risk factors from 1980 to 2010: a comparative risk assessment

Background High blood pressure, blood glucose, serum cholesterol, and BMI are risk factors for cardiovascular diseases and some of these factors also increase the risk of chronic kidney disease and diabetes. We estimated mortality from cardiovascular diseases, chronic kidney disease, and diabetes that was attributable to these four cardiometabolic risk factors for all countries and regions from 1980 to 2010. Methods We used data for exposure to risk factors by country, age group, and sex from pooled analyses of populationbased health surveys. We obtained relative risks for the eff ects of risk factors on cause-specifi c mortality from metaanalyses of large prospective studies. We calculated the population attributable fractions for- each risk factor alone, and for the combination of all risk factors, accounting for multicausality and for mediation of the eff ects of BMI by the other three risks. We calculated attributable deaths by multiplying the cause-specifi c population attributable fractions by the number of disease-specifi c deaths. We obtained cause-specifi c mortality from the Global Burden of Diseases, Injuries, and Risk Factors 2010 Study. We propagated the uncertainties of all the inputs to the fi nal estimates. Findings In 2010, high blood pressure was the leading risk factor for deaths due to cardiovascular diseases, chronic kidney disease, and diabetes in every region, causing more than 40% of worldwide deaths from these diseases; high BMI and glucose were each responsible for about 15% of deaths, and high cholesterol for more than 10%. After accounting for multicausality, 63% (10\ub78 million deaths, 95% CI 10\ub71\u201311\ub75) of deaths from these diseases in 2010 were attributable to the combined eff ect of these four metabolic risk factors, compared with 67% (7\ub71 million deaths, 6\ub76\u20137\ub76) in 1980. The mortality burden of high BMI and glucose nearly doubled from 1980 to 2010. At the country level, age-standardised death rates from these diseases attributable to the combined eff ects of these four risk factors surpassed 925 deaths per 100 000 for men in Belarus, Kazakhstan, and Mongolia, but were less than 130 deaths per 100 000 for women and less than 200 for men in some high-income countries including Australia, Canada, France, Japan, the Netherlands, Singapore, South Korea, and Spain. Interpretation The salient features of the cardiometabolic disease and risk factor epidemic at the beginning of the 21st century are high blood pressure and an increasing eff ect of obesity and diabetes. The mortality burden of cardiometabolic risk factors has shifted from high-income to low-income and middle-income countries. Lowering cardiometabolic risks through dietary, behavioural, and pharmacological interventions should be a part of the globalresponse to non-communicable diseases

Solvothermal synthesis and thermoelectric properties of indium telluride nanostring-cluster hierarchical structures

A simple solvothermal approach has been developed to successfully synthesize n-type α-In2Te3 thermoelectric nanomaterials. The nanostring-cluster hierarchical structures were prepared using In(NO3)3 and Na2TeO3 as the reactants in a mixed solvent of ethylenediamine and ethylene glycol at 200°C for 24 h. A diffusion-limited reaction mechanism was proposed to explain the formation of the hierarchical structures. The Seebeck coefficient of the bulk pellet pressed by the obtained samples exhibits 43% enhancement over that of the corresponding thin film at room temperature. The electrical conductivity of the bulk pellet is one to four orders of magnitude higher than that of the corresponding thin film or p-type bulk sample. The synthetic route can be applied to obtain other low-dimensional semiconducting telluride nanostructures