The crystalline units of the High Himalayas in the Lahul-Zanskar region (northwest India): metamorphic-tectonic history and geochronology of the collided and imbricated Indian plate

In the High Himalayan belt of northwest India, crustal thickening linked to Palaeogene collision between India and Eurasia has led to the formation of two main crystalline tectonic units separated by the syn-metamorphic Miyar Thrust: the High Himalayan Crystallines sensu stricto (HHC) at the bottom, and the Kade Unit at the top. These units are structurally interposed between the underlying Lesser Himalaya and the very low-grade sediments of the Tibetan nappes. They consist of paragneisses, orthogneisses, minor metabasics and, chiefly in the HHC, leucogranites. The HHC registers: a polyphase metamorphism with two main stages designated as M1 and M2; a metamorphic zonation with high-temperature recrystallization and migmatization at middle structural levels and medium-temperature assemblages at upper and lower levels. In contrast, the Kade Unit underwent a low-temperature metamorphism. Rb-Sr and U-Th-Pb isotope data point to derivation of the orthogneisses from early Palaeozoic granitoids, while the leucogranites formed by anatexis of the HHC rocks and were probably emplaced during Miocene time. Most of the complicated metamorphic setting is related to polyphase tectonic stacking of the HHC with the ‘cooler' Kade Unit and Lesser Himalaya during the Himalayan history. However, a few inconsistencies exist for a purely Himalayan age of some Ml assemblages of the HHC. As regards the crustal-derived leucogranites, the formation of a first generation mixed with quartzo-feldspathic leucosomes was possibly linked to melt-lubricated shear zones which favoured rapid crustal displacements; at upper levels they intruded during stage M2 and the latest movements along the syn-metamorphic Miyar Thrust, but before juxtaposition of the Tibetan nappes along the late- metamorphic Zanskar Faul

Syros Metasomatic Tourmaline: Evidence for Very High-δ11B Fluids in Subduction Zones

High-pressure (HP) metamorphic blocks enclosed in a mafic to ultramafic matrix from a mélange on the island of Syros are rimmed by tourmaline-bearing reaction zones (blackwalls). The B isotopic composition of dravitic tourmaline within these blackwalls was investigated in situ by secondary ion mass spectrometry. Boron in these tourmalines is unusually heavy, with δ11B values exceeding +18‰ in all investigated samples and reaching an extreme value of +28·4‰ in one sample. Blackwalls formed during exhumation of the HP mélange at a depth of 20-25 km at temperatures of 400-430°C, by influx of external hydrous fluids. The compositions of the fluids are estimated to be in the range of 100-300 μg/g B with δ11B values of +18 to +28‰. The high δ11B values cannot be explained by tourmaline formation from unmodified slab-derived fluids. However, such fluids could interact with the material in the exhumation channel on their way from the dehydrating slab to the site of tourmaline formation in the blackwalls. This could produce exceptionally high δ11B values in the fluids, a case that is modelled in this study. The model demonstrates that subduction fluids may be effectively modified in both trace element and isotopic composition during their migration through the material overlying the subducting slab. Blackwall tourmaline from Syros has a large grain size (several centimetres), high abundance, and an exceptionally high δ11B value. The formation of tourmaline at the contact between mafic or felsic HP blocks and their ultramafic matrix involved fluids released during dehydration reactions in the subducting slab. It forms a heavy-boron reservoir in hybrid rocks overlying the subducting slab, and may, thus, have a significant impact on the geochemical cycle of B and its isotopes in subduction zone

Boron isotope ratio (delta B-11) measurements in water framework directive monitoring programs: comparison between double focusing sector field ICP and thermal ionization mass spectrometry

International audienceThe aim of our research was to compare delta B-11 measurements performed with thermal ionization mass spectrometry (TIMS) and sector field-inductively coupled plasma-mass spectrometry (SF-ICP-MS) and evaluate the feasibility of implementing stable isotope methods in European water framework directive (WFD) monitoring programs. The comparison was based on delta B-11 measurements of 192 ground-and surface water samples and 15 leachates of nitrate pollution source materials (organic and mineral fertilisers). The precision of delta B-11 measurements attainable with SF-ICP-MS, 2 sigma= +/- 2.6 parts per thousand; (n = 192), is as expected lower than the precision achieved by TIMS, 2 sigma= +/- 0.3 parts per thousand (n=183). However the ease of use, rapidity and availability of SF-ICP-MS on one hand and the observed variability in delta B-11 in ground-and surface water on the other (from -3.4 to +37 parts per thousand), demonstrates that using SF-ICP-MS as an isotopic screening method would promote the use of isotopic methodology for WFD monitoring. Based on the results of the different case studies it is shown that retrieving precise information on the identification of pollution sources from delta B-11 values requires reaching the best analytical precision and accuracy possible. Hence, the superior precision of TIMS advantages tracing of nitrate pollution sources. However for some cases, e. g. trying to decipher contributions between sources with really distinct delta B-11 signatures (e.g. manure and sewage effluent), SF-ICP-MS results lead to the same conclusions and can therefore be used as a first approachable screening method for the determination of delta B-11 in WFD monitoring programs

Crustal structure and rift flank uplift of the Adare Trough, Antarctica

The Adare Trough, located 100 km northeast of Cape Adare, Antarctica, represents the extinct third arm of a Tertiary spreading ridge between East and West Antarctica. It is characterized by pronounced asymmetric rift flanks elevated up to over 2 km above the trough's basement, accompanied by a large positive mantle Bouguer anomaly. On the basis of recently acquired seismic reflection and ship gravity data, we invert mantle Bouguer anomalies from the Adare Trough and obtain an unexpectedly large oceanic crustal thickness maximum of 9–10.5 km underneath the extinct ridge. A regional positive residual basement depth anomaly between 1 and 2.5 km in amplitude characterizes ocean crust from offshore Victoria Land to the Balleny Islands and north of Iselin Bank. The observations and models indicate that the mid/late Tertiary episode of slow spreading between East and West Antarctica was associated with a mantle thermal anomaly. The increasing crustal thickness toward the extinct ridge indicates that this thermal mantle anomaly may have increased in amplitude through time during the Adare spreading episode. This scenario is supported by a mantle convection model, which indicates the formation and strengthening of a major regional negative upper mantle density anomaly in the southwest Pacific in the last 50 million years. The total amount of post-26 Ma extension associated with Adare Trough normal faulting was about 7.5 km, in anomalously thick oceanic crust with a lithospheric effective elastic thickness (EET) between 3.5 and 5 km. This corresponds to an age between 3 and 5 million years based on a thermal boundary layer model and supports a scenario in which the Adare Trough formed soon after spreading between East and West Antarctica ceased, confined to relatively weak lithosphere with anomalously thick oceanic crust. There is little evidence for major subsequent structural activity in the Adare trough area from the available seismic data, indicating that this part of the West Antarctic Rift system became largely inactive in the early Miocene, with the exception of minor structural reactivation which is visible in the seismic data as offsets up to end of the early Pliocene

Serpentinization in the trench-outer rise region offshore of Nicaragua: constraints from seismic refraction and wide-angle data

Recent seismic evidence suggested that most oceanic plate hydration is associated with trench-outer rise faulting prior to subduction. Hydration at trenches may have a significant impact on the subduction zone water cycle. Previous seismic experiments conducted to the northwest of Nicoya Peninsula, Northern Costa Rica, have shown that the subducting Cocos lithosphere is pervasively altered, which was interpreted to be due to both hydration (serpentinization) and fracturing of the crustal and upper-mantle rocks. New seismic wide-angle reflection and refraction data were collected along two profiles, running parallel to the Middle American trench axis offshore of central Nicaragua, revealing lateral changes of the seismic properties of the subducting lithosphere. Seismic structure along both profiles is characterized by low velocities both in the crust and upper mantle. Velocities in the uppermost mantle are found to be in the range 7.3–7.5 km s−1; thus are 8–10 per cent lower than velocities typical for unaltered peridotites and hence confirm the assumption that serpentinization is a common process at the trench-outer rise area offshore of Nicaragua. In addition, a prominent velocity anomaly occurred within the crust beneath two seamounts. Here, velocity reduction may indicate increased porosity and perhaps permeability, supporting the idea that seamounts serve as sites for water percolation and circulation

Geogenic and atmospheric sources for volatile organic compounds in fumarolic emissions from Mt. Etna and Vulcano Island (Sicily, Italy)

In this paper, fluid source(s) and processes controlling the chemical composition of volatile organic compounds (VOCs) in gas discharges from Mt. Etna and Vulcano Island(Sicily, Italy) were investigated. The main composition of the Etnean and Volcano gas emissions is produced by mixing, to various degrees, of magmatic and hydrothermal components. VOCs are dominated by alkanes, alkenes and aromatics, with minor, though significant, concentrations of O-, S- and Cl(F)-substituted compounds. The main mechanism for the production of alkanes is likely related to pyrolysis of organic-matterbearing sediments that interact with the ascending magmatic fluids. Alkanes are then converted to alkene and aromatic compounds via catalytic reactions (dehydrogenation and dehydroaromatization, respectively). Nevertheless, an abiogenic origin for the light hydrocarbons cannot be ruled out. Oxidative processes of hydrocarbons at relatively high temperatures and oxidizing conditions, typical of these volcanic-hydrothermal fluids, may explain the production of alcohols, esters, aldehydes, as well as O- and S-bearing heterocycles. By comparing the concentrations of hydrochlorofluorocarbons (HCFCs) in the fumarolic discharges with respect to those of background air, it is possible to highlight that they have a geogenic origin likely due to halogenation of both methane and alkenes. Finally, chlorofluorocarbon (CFC) abundances appear to be consistent with background air, although the strong air contamination that affects the Mt. Etna fumaroles may mask a possible geogenic contribution for these compounds. On the other hand, no CFCs were detected in the Vulcano gases, which are characterized by low air contribution. Nevertheless, a geogenic source for these compounds cannot be excluded on the basis of the present data