Superconducting properties of Nb thin films deposited on porous silicon templates

Porous silicon, obtained by electrochemical etching, has been used as a substrate for the growth of nanoperforated Nb thin films. The films, deposited by UHV magnetron sputtering on the porous Si substrates, inherited their structure made of holes of 5 or 10 nm diameter and of 10 to 40 nm spacing, which provide an artificial pinning structure. The superconducting properties were investigated by transport measurements performed in the presence of magnetic field for different film thickness and substrates with different interpore spacing. Perpendicular upper critical fields measurements present peculiar features such as a change in the H_c2(T) curvature and oscillations in the field dependence of the superconducting resistive transition width at H=1 Tesla. This field value is much higher than typical matching fields in perforated superconductors, as a consequence of the small interpore distance.Comment: accepted for publication on Journal of Applied Physic

Optimizing MOF properties for seasonal heat storage: a machine learning approach

In the quest to enhance thermochemical energy storage using promising sorbents, this work presents a study on the optimization of Metal Organic Frameworks (MOFs) properties for gas sorption, with a focus on CO2 and H2O adsorption. Through the analysis of crystallographic descriptors, the study aims to streamline the selection of MOFs that could potentially exceed the performance of existing water sorbent pairs. A comprehensive comparison of sequential learning (SL) algorithms reveals a method for identifying the minimal set of descriptors that influence adsorption properties of MOFs. The protocol involves constructing and training machine learning (ML) models to determine the number of influential descriptors and utilizing SHAP analysis to evaluate their importance. Findings suggest that including only these critical descriptors in the exploration space reduces computational load. Notably, the COMBO and the FUELS algorithms consistently outshine random guessing, validating their efficacy in materials optimization. The challenge of accessing full adsorption properties across the entire coverage range is addressed by a computational screening procedure requiring minimal input data. This method suggests that some vanadium based MOFs, originally designed for different purposes, could surpass the current leading compounds for thermal energy storage, primarily due to their optimal Henry coefficient values for water adsorption

Spectroscopic behaviour of some superconducting materials containing tetraoxoanions

A number of materials of composition YSr₂Cu₂.(XO₄)₀.₂Oy(X = S, P, V) and others in which Y (III) was partially replaced by Sr(II) and/or Ca(II) were prepared by solid state reactions. Their unit cell parameters were determined and refined from X-ray powder data. The infrared spectra of the different tetraoxoanions incorporated in these materials were analyzed and discussed in detail. The vibrational modes of the other structural units present in these lattices were also approximately assigned in comparison with known spectral data of related materials.Centro de Química Inorgánic

Effects of the fatty acid amide hydrolase inhibitor URB597 on coping behavior under challenging conditions in mice

RATIONALE: Recent evidence suggests that in addition to controlling emotional behavior in general, endocannabinoid signaling is engaged in shaping behavioral responses to challenges. This important function of endocannabinoids is still poorly understood. OBJECTIVES: Here we investigated the impact of blockade of fatty acid amide hydrolase (FAAH), the degrading enzyme of anandamide on behavioral responses induced by challenges of different intensity. METHODS: Mice treated with FAAH inhibitor URB597 were either manually restrained on their backs (back test) or received foot-shocks. RESULTS: The behavior of mice showed bimodal distribution in the back test: they either predominantly showed escape attempts or equally distributed time between passivity and escape. URB597 increased escapes in animals with low escape scores. No effects were noticed in mice showing high escape scores, which is likely due to a ceiling effect. We hypothesized that stronger stressors would wash out individual differences in coping; therefore, we exposed mice to foot-shocks that decreased locomotion and increased freezing in all mice. URB597 ameliorated both responses. The re-exposure of mice to the shock cage 14 days later without delivering shocks or treatment was followed by reduced and fragmented sleep as shown by electrophysiological recordings. Surprisingly, sleep was more disturbed after the reminder than after shocks in rats receiving vehicle before foot-shocks. These reminder-induced disturbances were abolished by URB597 administered before shocks. CONCLUSIONS: These findings suggest that FAAH blockade has an important role in the selection of behavioral responses under challenging conditions and-judging from its long-term effects-that it influences the cognitive appraisal of the challenge

Dogs and humans respond to emotionally competent stimuli by producing different facial actions

The commonality of facial expressions of emotion has been studied in different species since Darwin, with most of the research focusing on closely related primate species. However, it is unclear to what extent there exists common facial expression in species more phylogenetically distant, but sharing a need for common interspecific emotional understanding. Here we used the objective, anatomically-based tools, FACS and DogFACS (Facial Action Coding Systems), to quantify and compare human and domestic dog facial expressions in response to emotionally-competent stimuli associated with different categories of emotional arousal. We sought to answer two questions: Firstly, do dogs display specific discriminatory facial movements in response to different categories of emotional stimuli? Secondly, do dogs display similar facial movements to humans when reacting in emotionally comparable contexts? We found that dogs displayed distinctive facial actions depending on the category of stimuli. However, dogs produced different facial movements to humans in comparable states of emotional arousal. These results refute the commonality of emotional expression across mammals, since dogs do not display human-like facial expressions. Given the unique interspecific relationship between dogs and humans, two highly social but evolutionarily distant species sharing a common environment, these findings give new insight into the origin of emotion expression

Communication Impairments in Mice Lacking Shank1: Reduced Levels of Ultrasonic Vocalizations and Scent Marking Behavior

Autism is a neurodevelopmental disorder with a strong genetic component. Core symptoms are abnormal reciprocal social interactions, qualitative impairments in communication, and repetitive and stereotyped patterns of behavior with restricted interests. Candidate genes for autism include the SHANK gene family, as mutations in SHANK2 and SHANK3 have been detected in several autistic individuals. SHANK genes code for a family of scaffolding proteins located in the postsynaptic density of excitatory synapses. To test the hypothesis that a mutation in SHANK1 contributes to the symptoms of autism, we evaluated Shank1−/− null mutant mice for behavioral phenotypes with relevance to autism, focusing on social communication. Ultrasonic vocalizations and the deposition of scent marks appear to be two major modes of mouse communication. Our findings revealed evidence for low levels of ultrasonic vocalizations and scent marks in Shank1−/− mice as compared to wildtype Shank1+/+ littermate controls. Shank1−/− pups emitted fewer vocalizations than Shank1+/+ pups when isolated from mother and littermates. In adulthood, genotype affected scent marking behavior in the presence of female urinary pheromones. Adult Shank1−/− males deposited fewer scent marks in proximity to female urine than Shank1+/+ males. Call emission in response to female urinary pheromones also differed between genotypes. Shank1+/+ mice changed their calling pattern dependent on previous female interactions, while Shank1−/− mice were unaffected, indicating a failure of Shank1−/− males to learn from a social experience. The reduced levels of ultrasonic vocalizations and scent marking behavior in Shank1−/− mice are consistent with a phenotype relevant to social communication deficits in autism.National Institute of Mental Health (U.S.) (Intramural Research Program)Simons Foundatio

Sedimental Coal Ashes: Its pozzolanic effects in Portland cement clinker

Las centrales termoeléctricas generan una gran cantidad de residuos sólidos como producto de la combustión del carbón, conocidos como cenizas. Existen dos tipos de cenizas: volantes - de tamaño muy fino-, que son arrastradas por la corriente de humos de los sistemas de eliminación de partículas y, -las sedimentadas - más gruesas, que se funden y se aglomeran acumulándose en el fondo del homo o en los tubos de las calderas. Intentando resolver factores técnico-económicos y ecológicos al mismo tiempo, en este trabajo presentamos los resultados obtenidos de la incorporación de un 20% en peso de cenizas sedimentadas (Cs) como adición activa al cemento Portland. Se estudia la potencial puzolanidad de la adición y se muestran resultados de seguimiento de la hidratación a temprana edad, variación de color y resistencia mecánica del material compuesto obtenido por molienda conjunta del clinker portland y el material residual.The power plants generate a large amount of solid waste, known as ash, as a product of combustion of coal. There are two types of ash: fly - very fine in size- which are carried by the flow of smoke removal systems, and sedimentary particles -coarse particles - which are melted and agglomerated accumulated in the bottom of the furnace or in the boiler tubes. Trying to resolve technical-economic and ecologic factors at the same time, this work presents the results of adding a 20% weight of sediment ash (Cs) as an active addition to the Portland cement. The potential pozzolanity of the addition is studied and it is shown proceeding of the hydration at early age, color variation and mechanical strength of the composite material obtained by grinding together Portland clinker with the residual material.Centro de Tecnología de Recursos Minerales y CerámicaFacultad de Ingenierí

Sedimental Coal Ashes: Its pozzolanic effects in Portland cement clinker

Las centrales termoeléctricas generan una gran cantidad de residuos sólidos como producto de la combustión del carbón, conocidos como cenizas. Existen dos tipos de cenizas: volantes - de tamaño muy fino-, que son arrastradas por la corriente de humos de los sistemas de eliminación de partículas y, -las sedimentadas - más gruesas, que se funden y se aglomeran acumulándose en el fondo del homo o en los tubos de las calderas. Intentando resolver factores técnico-económicos y ecológicos al mismo tiempo, en este trabajo presentamos los resultados obtenidos de la incorporación de un 20% en peso de cenizas sedimentadas (Cs) como adición activa al cemento Portland. Se estudia la potencial puzolanidad de la adición y se muestran resultados de seguimiento de la hidratación a temprana edad, variación de color y resistencia mecánica del material compuesto obtenido por molienda conjunta del clinker portland y el material residual.The power plants generate a large amount of solid waste, known as ash, as a product of combustion of coal. There are two types of ash: fly - very fine in size- which are carried by the flow of smoke removal systems, and sedimentary particles -coarse particles - which are melted and agglomerated accumulated in the bottom of the furnace or in the boiler tubes. Trying to resolve technical-economic and ecologic factors at the same time, this work presents the results of adding a 20% weight of sediment ash (Cs) as an active addition to the Portland cement. The potential pozzolanity of the addition is studied and it is shown proceeding of the hydration at early age, color variation and mechanical strength of the composite material obtained by grinding together Portland clinker with the residual material.Centro de Tecnología de Recursos Minerales y CerámicaFacultad de Ingenierí

Perspectives on utilization of edible coatings and nano-laminate coatings for extension of postharvest storage of fruits and vegetables

It is known that in developing countries, a large quantity of fruit and vegetable losses results at postharvest and processing stages due to poor or scarce storage technology and mishandling during harvest. The use of new and innovative technologies for reducing postharvest losses is a requirement that has not been fully covered. The use of edible coatings (mainly based on biopolymers) as a postharvest technique for agricultural commodities has offered biodegradable alternatives in order to solve problems (e.g., microbiological growth) during produce storage. However, biopolymer-based coatings can present some disadvantages such as: poor mechanical properties (e.g., lipids) or poor water vapor barrier properties (e.g., polysaccharides), thus requiring the development of new alternatives to solve these drawbacks. Recently, nanotechnology has emerged as a promising tool in the food processing industry, providing new insights about postharvest technologies on produce storage. Nanotechnological approaches can contribute through the design of functional packing materials with lower amounts of bioactive ingredients, better gas and mechanical properties and with reduced impact on the sensorial qualities of the fruits and vegetables. This work reviews some of the main factors involved in postharvest losses and new technologies for extension of postharvest storage of fruits and vegetables, focused on perspective uses of edible coatings and nano-laminate coatings.María L. Flores-López thanks Mexican Science and Technology Council (CONACYT, Mexico) for PhD fellowship support (CONACYT Grant Number: 215499/310847). Miguel A. Cerqueira (SFRH/BPD/72753/2010) is recipient of a fellowship from the Fundação para a Ciência e Tecnologia (FCT, POPH-QREN and FSE Portugal). The authors also thank the FCT Strategic Project of UID/ BIO/04469/2013 unit, the project RECI/BBB-EBI/0179/2012 (FCOMP-01-0124-FEDER-027462) and the project ‘‘BioInd Biotechnology and Bioengineering for improved Industrial and AgroFood processes,’’ REF. NORTE-07-0124-FEDER-000028 Co-funded by the Programa Operacional Regional do Norte (ON.2 – O Novo Norte), QREN, FEDER. Fundação Cearense de Apoio ao Desenvolvimento Científico e Tecnológico – FUNCAP, CE Brazil (CI10080-00055.01.00/13)

Sedimental Coal Ashes: Its pozzolanic effects in Portland cement clinker

Las centrales termoeléctricas generan una gran cantidad de residuos sólidos como producto de la combustión del carbón, conocidos como cenizas. Existen dos tipos de cenizas: volantes - de tamaño muy fino-, que son arrastradas por la corriente de humos de los sistemas de eliminación de partículas y, -las sedimentadas - más gruesas, que se funden y se aglomeran acumulándose en el fondo del homo o en los tubos de las calderas. Intentando resolver factores técnico-económicos y ecológicos al mismo tiempo, en este trabajo presentamos los resultados obtenidos de la incorporación de un 20% en peso de cenizas sedimentadas (Cs) como adición activa al cemento Portland. Se estudia la potencial puzolanidad de la adición y se muestran resultados de seguimiento de la hidratación a temprana edad, variación de color y resistencia mecánica del material compuesto obtenido por molienda conjunta del clinker portland y el material residual.The power plants generate a large amount of solid waste, known as ash, as a product of combustion of coal. There are two types of ash: fly - very fine in size- which are carried by the flow of smoke removal systems, and sedimentary particles -coarse particles - which are melted and agglomerated accumulated in the bottom of the furnace or in the boiler tubes. Trying to resolve technical-economic and ecologic factors at the same time, this work presents the results of adding a 20% weight of sediment ash (Cs) as an active addition to the Portland cement. The potential pozzolanity of the addition is studied and it is shown proceeding of the hydration at early age, color variation and mechanical strength of the composite material obtained by grinding together Portland clinker with the residual material.Centro de Tecnología de Recursos Minerales y CerámicaFacultad de Ingenierí