Analysis of dynamic mechanical response in torsion

We investigate the dynamic response of industrial rubbers (styrene-butadiene random copolymers, SBR) in torsion and compare against common small amplitude oscillatory shear measurements by using a torsion rectangular fixture, a modified torsion cylindrical fixture, and a conventional parallel plate fixture, respectively, in two different rheometers (ARES 2kFRTN1 from TA Instruments, USA and MCR 702 from Anton Paar-Physica, Austria). The effects of specimen geometry (length-to-width aspect ratio) on storage modulus and level of clamping are investigated. For cylindrical specimens undergoing torsional deformation, we find that geometry and clamping barely affect the shear moduli, and the measurements essentially coincide with those using parallel plates. In contrast, a clear dependence of the storage modulus on the aspect ratio is detected for specimens having rectangular cross section. The empirical correction used routinely in this test is based on geometrical factors and can account for clamping effects, but works only for aspect ratios above a threshold value of 1.4. By employing a finite element analysis, we perform a parametric study of the effects of the aspect ratio in the cross-sectional stress distribution and the linear viscoelastic torsional response. We propose a new, improved empirical equation for obtaining accurate moduli values in torsion at different aspect ratios, whose general validity is demonstrated in both rheometers. These results should provide a guideline for measurements with different elastomers, for which comparison with dynamic oscillatory tests may not be possible due to wall slip issues

Nanoparticles synthesis in wet-operating stirred media: Preliminary investigation with DEM simulations

The growing demand of nanomaterials is pushing towards the development of alternative strategies for the safe and sustainable production of nanoparticles. At the same time, to ensure high performances, a fine control over the product specifications is required. We focused on a bottom-up method combined with a mechanical disaggregation technique using a wet bead-stirring process, since it provides numerous advantages over other approaches, including the minimization of the nanoparticles air dispersion and a greater control over the final product. However, given the broad variability of the parameters involved in both the setup and operation of the process, it is essential to combine the experiments with a theoretical-simulative study to optimize the design. The present activity consists in the preliminary simulation of the interactions among the grinding beads, modelled through the discrete element method (DEM), and the magnetic stirrer. This approach, providing information regarding the frequency and energy of collisions, which can be related to the properties of the produced nanoparticles, allows a fine tuning of the process parameters

Differential adherence and expression of virulence traits by Candida albicans and Candida parapsilosis in mono- and dual-species cultures in artificial saliva

AIMS: To evaluate specific virulence factors of Candida albicans and Candida parapsilosis clinical oral isolates in mono- and dual-species culture in the presence of artificial saliva. METHODS AND RESULTS: Two of the strains used in this study were isolated from co-infection (C. albicans AM and C. parapsilosis AM2), and the other two were isolated from single infection (C. albicans AC and C. parapsilosis AD). The number of adhered yeast cells was measured and their enzymatic activity was determined simultaneously. In mono-species culture, C. parapsilosis strains adhered to a higher extent to the surface in comparison with the C. albicans strains. In dual-species culture, the C. parapsilosis strains adhered more in the presence of C. albicans AM. Interestingly, C. albicans AM and C. parapsilosis AD adhered to a higher extent when compared with all other co-cultures. In dual-species culture, the enzymatic activity of C. parapsilosis strains in the presence of C. albicans AC was higher than in the presence of C. albicans AM. CONCLUSIONS: The virulence factors of C. albicans and C. parapsilosis differ from strain to strain and are influenced by the presence of other species in culture. SIGNIFICANCE AND IMPACT OF THE STUDY: To understand the expression of virulence factors in Candida dual-species systems.This work was supported by Portuguese Foundation for Science and Technology (FCT) through the grant SFRH/BPD/20987/2004 attributed to Claudia Botelho

Risk of hospitalization for heart failure in patients with type 2 diabetes newly treated with DPP-4 inhibitors or other oral glucose-lowering medications: A retrospective registry study on 127,555 patients from the Nationwide OsMed Health-DB Database

Aims Oral glucose-lowering medications are associated with excess risk of heart failure (HF). Given the absence of comparative data among drug classes, we performed a retrospective study in 32 Health Services of 16 Italian regions accounting for a population of 18 million individuals, to assess the association between HF risk and use of sulphonylureas, DPP-4i, and glitazones. Methods and results We extracted data on patients with type 2 diabetes who initiated treatment with DPP-4i, thiazolidinediones, or sulphonylureas alone or in combination with metformin during an accrual time of 2 years. The endpoint was hospitalization for HF (HHF) occurring after the first 6 months of therapy, and the observation was extended for up to 4 years. A total of 127 555 patients were included, of whom 14.3% were on DPP-4i, 72.5% on sulphonylurea, 13.2% on thiazolidinediones, with average 70.7% being on metformin as combination therapy. Patients in the three groups differed significantly for baseline characteristics: age, sex, Charlson index, concurrent medications, and previous cardiovascular events. During an average 2.6-year follow-up, after adjusting for measured confounders, use of DPP-4i was associated with a reduced risk of HHF compared with sulphonylureas [hazard ratio (HR) 0.78; 95% confidence interval (CI) 0.62-0.97; P = 0.026]. After propensity matching, the analysis was restricted to 39 465 patients, and the use of DPP-4i was still associated with a lower risk of HHF (HR 0.70; 95% CI 0.52-0.94; P = 0.018). Conclusion In a very large observational study, the use of DPP-4i was associated with a reduced risk of HHF when compared with sulphonylureas

A Novel Pseudopodial Component of the Dendritic Cell Anti-Fungal Response: The Fungipod

Fungal pathologies are seen in immunocompromised and healthy humans. C-type lectins expressed on immature dendritic cells (DC) recognize fungi. We report a novel dorsal pseudopodial protrusion, the “fungipod”, formed by DC after contact with yeast cell walls. These structures have a convoluted cell-proximal end and a smooth distal end. They persist for hours, exhibit noticeable growth and total 13.7±5.6 µm long and 1.8±0.67 µm wide at the contact. Fungipods contain clathrin and an actin core surrounded by a sheath of cortactin. The actin cytoskeleton, but not microtubules, is required for fungipod integrity and growth. An apparent rearward flow (225±55 nm/second) exists from the zymosan contact site into the distal fungipod. The phagocytic receptor Dectin-1 is not required for fungipod formation, but CD206 (Mannose Receptor) is the generative receptor for these protrusions. The human pathogen Candida parapsilosis induces DC fungipod formation strongly, but the response is species specific since the related fungal pathogens Candida tropicalis and Candida albicans induce very few and no fungipods, respectively. Our findings show that fungipods are dynamic actin-driven cellular structures involved in fungal recognition by DC. They may promote yeast particle phagocytosis by DC and are a specific response to large (i.e., 5 µm) particulate ligands. Our work also highlights the importance of this novel protrusive structure to innate immune recognition of medically significant Candida yeasts in a species specific fashion

Using RNA-seq to determine the transcriptional landscape and the hypoxic response of the pathogenic yeast Candida parapsilosis

<p>Abstract</p> <p>Background</p> <p><it>Candida parapsilosis </it>is one of the most common causes of <it>Candida </it>infection worldwide. However, the genome sequence annotation was made without experimental validation and little is known about the transcriptional landscape. The transcriptional response of <it>C. parapsilosis </it>to hypoxic (low oxygen) conditions, such as those encountered in the host, is also relatively unexplored.</p> <p>Results</p> <p>We used next generation sequencing (RNA-seq) to determine the transcriptional profile of <it>C. parapsilosis </it>growing in several conditions including different media, temperatures and oxygen concentrations. We identified 395 novel protein-coding sequences that had not previously been annotated. We removed > 300 unsupported gene models, and corrected approximately 900. We mapped the 5' and 3' UTR for thousands of genes. We also identified 422 introns, including two introns in the 3' UTR of one gene. This is the first report of 3' UTR introns in the Saccharomycotina. Comparing the introns in coding sequences with other species shows that small numbers have been gained and lost throughout evolution. Our analysis also identified a number of novel transcriptional active regions (nTARs). We used both RNA-seq and microarray analysis to determine the transcriptional profile of cells grown in normoxic and hypoxic conditions in rich media, and we showed that there was a high correlation between the approaches. We also generated a knockout of the <it>UPC2 </it>transcriptional regulator, and we found that similar to <it>C. albicans</it>, Upc2 is required for conferring resistance to azole drugs, and for regulation of expression of the ergosterol pathway in hypoxia.</p> <p>Conclusion</p> <p>We provide the first detailed annotation of the <it>C. parapsilosis </it>genome, based on gene predictions and transcriptional analysis. We identified a number of novel ORFs and other transcribed regions, and detected transcripts from approximately 90% of the annotated protein coding genes. We found that the transcription factor Upc2 role has a conserved role as a major regulator of the hypoxic response in <it>C. parapsilosis </it>and <it>C. albicans</it>.</p

Loss of C-5 Sterol Desaturase Activity Results in Increased Resistance to Azole and Echinocandin Antifungals in a Clinical Isolate of Candida parapsilosis

Among emerging non-albicans Candida species, Candida parapsilosis is of particular concern as a cause of nosocomial bloodstream infections in neonatal and intensive care unit patients. While fluconazole and echinocandins are considered effective treatments for such infections, recent reports of fluconazole and echinocandin resistance in C. parapsilosis indicate a growing problem. The present study describes a novel mechanism of antifungal resistance in this organism affecting susceptibility to azole and echinocandin antifungals in a clinical isolate obtained from a patient with prosthetic valve endocarditis. Transcriptome analysis indicated differential expression of several genes in the resistant isolate, including upregulation of ergosterol biosynthesis pathway genes ERG2, ERG5, ERG6, ERG11, ERG24, ERG25, and UPC2. Whole-genome sequencing revealed that the resistant isolate possessed an ERG3 mutation resulting in a G111R amino acid substitution. Sterol profiles indicated a reduction in sterol desaturase activity as a result of this mutation. Replacement of both mutant alleles in the resistant isolate with the susceptible isolate's allele restored wild-type susceptibility to all azoles and echinocandins tested. Disruption of ERG3 in the susceptible and resistant isolates resulted in a loss of sterol desaturase activity, high-level azole resistance, and an echinocandin-intermediate to -resistant phenotype. While disruption of ERG3 in C. albicans resulted in azole resistance, echinocandin MICs, while elevated, remained within the susceptible range. This work demonstrates that the G111R substitution in Erg3 is wholly responsible for the altered azole and echinocandin susceptibilities observed in this C. parapsilosis isolate and is the first report of an ERG3 mutation influencing susceptibility to the echinocandins

Candida parapsilosis complex water isolates from a haemodialysis unit: biofilm production and in vitro evaluation of the use of clinical antifungals

Candida parapsilosis, currently divided into three distinct species, proliferates in glucose-rich solutions and has been associated with infections resulting from the use of medical devices made of plastic, an environment common in dialysis centres. The aims of this study were (i) to screen for Candida orthopsilosis and Candida metapsilosis (100 environmental isolates previously identified as C. parapsilosis), (ii) to test the ability of these isolates to form biofilm and (iii) to investigate the in vitro susceptibility of Candida spp biofilms to the antifungal agents, fluconazole (FLC) and amphotericin B (AMB). Isolates were obtained from a hydraulic circuit collected from a haemodialysis unit. Based on molecular criteria, 47 strains were re-identified as C. orthopsilosis and 53 as C. parapsilosis. Analyses using a formazan salt reduction assay and total viable count, together with microscopy studies, revealed that 72 strains were able to form biofilm that was structurally similar, but with minor differences in morphology. A microtitre-based colorimetric assay used to test the susceptibility of fungal biofilms to AMB and FLC demonstrated that the C. parapsilosis complex displayed an increased resistance to these antifungal agents. The results from these analyses may provide a basis for implementing quality controls and monitoring to ensure the microbiological purity of dialysis water, including the presence of yeast

Rheology of a dilute suspension of aggregates in shear-thinning fluids

The prediction of the viscosity of suspensions is of fundamental importance in several fields. Most of the available studies have been focused on particles with simple shapes, for example, spheres or spheroids. In this work, we study the viscosity of a dilute suspension of fractal-shape aggregates suspended in a shear-thinning fluid by direct numerical simulations. The suspending fluid is modeled by the power-law constitutive equation. For each morphology, a map of particle angular velocities is obtained by solving the governing equations for several particle orientations. The map is used to integrate the kinematic equation for the orientation vectors and reconstruct the aggregate orientational dynamics. The intrinsic viscosity is computed by a homogenization procedure along the particle orbits. In agreement with previous results on Newtonian suspensions, the intrinsic viscosity, averaged over different initial orientations and aggregate morphologies characterized by the same fractal parameters, decreases by increasing the fractal dimension, that is, from rod-like to spherical-like aggregates. Shear-thinning further reduces the intrinsic viscosity showing a linear dependence with the flow index in the investigated range. The intrinsic viscosity can be properly scaled with respect to the number of primary particles and the flow index to obtain a single curve as a function of the fractal dimension