428 research outputs found

    Sedimentary processes at the base of a West Antarctic ice stream: Constraints from textural and compositional properties of subglacial debris

    Get PDF
    Samples of sediments from beneath Ice Stream B (at camp UpB), West Antarctica, provide the first opportunity to study the relationship between sediment properties and physical conditions in a sub-ice-stream environment. Piston coring in holes bored by hot-water drilling yielded five 1-3 m long, undisturbed subglacial sediment cores. We analyzed granulometry, composition, and particle morphology in these cores. The UpB cores are composed of a clay-rich, unsorted diamicton containing rare marine diatoms. Sedimentary particles in these cores bear no evidence of the recent crushing or abrasion that is common in other subglacial sedimentary environments. The presence of reworked diatoms and their state of preservation, as well as the relative spatial homogeneity of this diamicton, suggest that the UpB cores sampled a several-meter-thick till layer and not in situ glacimarine sediments. The till does incorporate material recycled from the subjacent poorly indurated Tertiary glacimarine sediments of the Ross Sea sedimentary basin, which extends beneath this part of the West Antarctic Ice Sheet. We propose that the lack of significant comminution in the UpB till is ultimately due to its setting over these easily erodible, clay-rich source sediments. The resulting fine-grained till matrix inhibits glacial comminution, because it facilitates buildup of high pore-water pressures and hinders interparticle stress concentrations. Our observations are consistent with the conjecture that subglacial deformation of weak, fine-grained tills does not produce significant comminution of till debris (Elson 1988). Based on our findings, we hypothesize that extensive layers of weak till may develop preferentially where ice overrides preexisting, poorly indurated, fine-grained sediments. Since such weak till layers create a permissive condition for ice streaming, sub-glacial geology may have an indirect but strong control over the location, extent, and basal mechanics of ice streams

    Basal mechanics of Ice Stream B, west Antarctica: 2. Undrained plastic bed model

    Get PDF
    Based on the results of our studies of the physical conditions beneath Ice Stream B, we formulate a new analytical ice stream model, the undrained plastic bed model (henceforth the UPB model). Mathematically, the UPB model is represented by a non-linear system of four coupled equations which express the relationships among ice sliding velocity, till strength, water storage in till, and basal melt rate. We examine this system of equations for conditions of ice stream stability over short timescales that permit holding ice stream geometry constant (less than hundreds of years). Temporal variability is introduced into the UPB model only by the direct dependence of till void ratio changes (ė = ∂e/∂t) on the basal melting rate m_r. Since till strength τ_b{e} and ice stream velocity U_b{τ_b} change as long as till void ratio varies, the first condition for ice stream stability is that of constant till water storage ė = 0. The second condition for ice stream stability arises from the feedback between ice stream velocity, till strength, and the basal melting rate which depends on shear heating m_r{ U_b τ_b}. This is the “weak till” condition which requires that in a steady state till strength is a small fraction of the gravitational driving stress τ_b < (n + 1)^(−1) τ_d. The salient feature of the UPB model is its ability to produce two thermo mechanically controlled equilibrium states, one with a strong bed and slow ice velocities (“ice sheet” mode) and one with a weak bed and fast ice velocities (“ice-stream” mode). This bimodality of basal conditions is consistent with the available observations of subglacial conditions beneath slow and fast moving ice in West Antarctica. Basal conditions that do not correspond to these two steady states may occur transiently during switches between the two stable modes. The UPB model demonstrates that ice streams may be prone to thermally triggered instabilities, during which small perturbations in the basal thermal energy balance grow, leading to generation or elimination of the basal conditions which cause ice streaming

    Crater Lakes on Mars: Development of Quantitative Thermal and Geomorphic Models

    Get PDF
    Impact craters on Mars have served as catchments for channel-eroding surface fluids, and hundreds of examples of candidate paleolakes are documented [1,2] (see Figure 1). Because these features show similarity to terrestrial shorelines, wave action has been hypothesized as the geomorphic agent responsible for the generation of these features [3]. Recent efforts have examined the potential for shoreline formation by wind-driven waves, in order to turn an important but controversial idea into a quantitative, falsifiable hypothesis. These studies have concluded that significant wave-action shorelines are unlikely to have formed commonly within craters on Mars, barring Earth-like weather for approx.1000 years [4,5,6]

    Reactivation of Kamb Ice Stream tributaries triggers century-scale reorganization of Siple Coast ice flow in West Antarctica

    Get PDF
    Ongoing, centennial-scale flow variability within the Ross ice streams of West Antarctica suggests that the present-day positive mass balance in this region may reverse in the future. Here, we use a three-dimensional ice-sheet model to simulate ice flow in this region over 250 years. The flow responds to changing basal properties, as a subglacial till layer interacts with water transported in an active subglacial hydrological system. We show that a persistent weak bed beneath the tributaries of the dormant Kamb Ice Stream is a source of internal ice-flow instability, which reorganizes all ice streams in this region, leading to a reduced (positive) mass balance within decades and a net loss of ice within two centuries. This hitherto unaccounted for flow variability could raise sea-level by 5mm this century. Better constraints on future sea-level change from this region will require improved estimates of geothermal heat flux and subglacial water transport.This work was carried out with support from the Isaac Newton trust, Cecil H. and Ida M. Green Foundation and Natural Environment Research Council (grants NE/E005950/1 and NE/J005800/1). SFP was supported by the U.S. Department of Energy Office of Science, Biological and Environmental Research program. ST acknowledges support from National Science Foundation (grant #0338295). SPC was supported by funding from the Cryospheric Sciences program of NASA and HAF was supported by funding from NSF (grant ANT-0838885 (Fricker)). The source code for the results presented can be obtained by contacting the corresponding author directlyThis is the final version of the article. It first appeared from Wiley via http://dx.doi.org/10.1002/2015GL06578

    The shallow shelf approximation as a "sliding law" in a thermomechanically coupled ice sheet model

    Full text link
    The shallow shelf approximation is a better ``sliding law'' for ice sheet modeling than those sliding laws in which basal velocity is a function of driving stress. The shallow shelf approximation as formulated by \emph{Schoof} [2006a] is well-suited to this use. Our new thermomechanically coupled sliding scheme is based on a plasticity assumption about the strength of the saturated till underlying the ice sheet in which the till yield stress is given by a Mohr-Coulomb formula using a modeled pore water pressure. Using this scheme, our prognostic whole ice sheet model has convincing ice streams. Driving stress is balanced in part by membrane stresses, the model is computable at high spatial resolution in parallel, it is stable with respect to parameter changes, and it produces surface velocities seen in actual ice streams.Comment: 12 pages of text; 4 tables; 27 figures; submitted to JGR Earth Surfac

    Roughness of a subglacial conduit under Hansbreen, Svalbard

    Get PDF
    K.M., J.G., X.L. and Y.C. were supported by the National Science Foundation (NSF) under Grant No. #1503928. Thefieldwork team (K.M., J.G., M.C.) were supported by the Norwegian Arctic Research Council and Svalbard Science Forum, RiS #6106. K.M. was also supported by the National Aeronautics and Space Administration (NASA)Headquarters under the NASA Earth and Space Science Fellowship Program – Grant NNX10AN83H, the University of California, Santa Cruz, and the Woods Hole Oceanographic Institution Ocean and Climate Change Institute post-graduate fellowship. Portions of this work were conducted while J.G. was supported by the NSF EAR Postdoctoral Fellowship (#0946767). S.T. was funded by NASA grant NNX11AH61G.Hydraulic roughness exerts an important but poorly understood control on water pressure in subglacial conduits. Where relative roughness values are 5%. Here we report the first quantitative assessment of roughness heights and hydraulic diameters in a subglacial conduit. We measured roughness heights in a 125 m long section of a subglacial conduit using structure-from-motion to produce a digital surface model, and hand-measurements of the b-axis of rocks. We found roughness heights from 0.07 to 0.22 m and cross-sectional areas of 1-2 m2, resulting in relative roughness of 3-12% and >5% for most locations. A simple geometric model of varying conduit diameter shows that when the conduit is small relative roughness is >30% and has large variability. Our results suggest that parameterizations of conduit hydraulic roughness in subglacial hydrological models will remain challenging until hydraulic diameters exceed roughness heights by a factor of 20, or the conduit radius is >1 m for the roughness elements observed here.Publisher PDFPeer reviewe

    Hydraulic and mechanical properties of glacial sediments beneath Unteraargletscher, Switzerland: implications for glacier basal motion

    Get PDF
    The force on a ‘ploughmeter’ and subglacial water pressure have been measured in the same borehole at Unteraargletscher, Switzerland, in order to investigate ice–sediment coupling and the motion at the base of a soft-bedded glacier. A strong inverse correlation of the recorded pressure and force fluctuations, in conjunction with a significant time lag between the two signals, suggests that pore-water pressures directly affect the strength of the subglacial sediment. The lag is interpreted to reflect the time required for the water-pressure wave to propagate through the pores of the sediment to the depth of the ploughmeter. Analysis of the propagation velocity of this pressure wave yielded an estimate of the hydraulic diffusivity, a key parameter necessary to characterize transient pore-water flow. Furthermore, the inferred inverse relationship between pore-water pressure and sediment strength implies that Coulomb-plastic deformation is an appropriate rheological model for the sediment underlying Unteraargletscher. However, the sediment strength as derived from the ploughmeter data was found to be one order of magnitude smaller than that calculated for a Coulomb-frictional material using the water-pressure measurements. This significant discrepancy might result from pore-water pressures in excess of hydrostatic down-glacier from the ploughmeter. As the ploughmeter is dragged through the sediment, sediment is compressed. If the rate of this compression is large relative to the rate at which pore water can drain away, excess pore-water pressures will develop that have the potential to weaken the sediment. The same process could lead to highly fluid sediment down-glacier from clasts that protrude into the glacier sole and thus would otherwise provide the roughness to couple the glacier to its bed (Iverson, 1999). Rapidly sliding glaciers overlying sediments might therefore move predominantly by ‘ploughing’, which tends to focus basal motion near the glacier sole rather than at depth in the bed
    corecore