A sensitive and selective chemiluminogenic probe for palladium

Palladium triggered removal of a propargyl group leads to the cleavage of the 1,2-dioxetane ring, leading to bright chemiluminescence. The reaction of the probe is highly specific for the Pd species, thus the probe described here has considerable potential for practical utility. © The Royal Society of Chemistry.2015

Chemiluminescence sensing of fluoride ions using a self-immolative amplifier

An enhanced chemiluminescence signal is obtained when electronically triggered dioxetane cleavage is initiated by fluoride-mediated deprotection of the silyl-protecting group, followed by self-immolation via 1,4-quinone-methide rearrangement. The reaction takes place even when the probe is trapped within a PMMA layer on top of a glass plate. In that arrangement, fluoride in aqueous solutions can be detected selectively at low micromolar concentrations. © 2014 American Chemical Society

Amplified Chemiluminescence Signal for Sensing Fluoride Ions

Bringing together the concepts of self-immolative linkers and chemiluminogen dioxetane modules, a chemiluminescence-based sensor for fluoride with signal amplification is presented. Signal amplification is obtained by triggering two chemiluminescence events for each reacting fluoride ion that in turn releases two fluoride ions for each ion. As expected, the chemiluminescence signal starts to rise following an induction period. In addition to the analytical potential, this chemical system is also of interest as a demonstration of positive feedback loop character. © 2017 American Chemical Society

A Bifunctional Photosensitizer for Enhanced Fractional Photodynamic Therapy: Singlet Oxygen Generation in the Presence and Absence of Light

The photosensitized generation of singlet oxygen within tumor tissues during photodynamic therapy (PDT) is self-limiting, as the already low oxygen concentrations within tumors is further diminished during the process. In certain applications, to minimize photoinduced hypoxia the light is introduced intermittently (fractional PDT) to allow time for the replenishment of cellular oxygen. This condition extends the time required for effective therapy. Herein, we demonstrated that a photosensitizer with an additional 2-pyridone module for trapping singlet oxygen would be useful in fractional PDT. Thus, in the light cycle, the endoperoxide of 2-pyridone is generated along with singlet oxygen. In the dark cycle, the endoperoxide undergoes thermal cycloreversion to produce singlet oxygen, regenerating the 2-pyridone module. As a result, the photodynamic process can continue in the dark as well as in the light cycles. Cell-culture studies validated this working principle in vitro. © 2016 Wiley-VCH Verlag GmbH & Co. KGaA

Near-IR absorbing BODIPY derivatives as glutathione-activated photosensitizers for selective photodynamic action

Enhanced spatiotemporal selectivity in photonic sensitization of dissolved molecular oxygen is an important target for improving the potential and the practical applications of photodynamic therapy. Considering the high intracellular glutathione concentrations within cancer cells, a series of BODIPY-based sensitizers that can generate cytotoxic singlet oxygen only after glutathione-mediated cleavage of the electron-sink module were designed and synthesized. Cell culture studies not only validate our design, but also suggest an additional role for the relatively hydrophobic quencher module in the internalization of the photosensitizer. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim

Synthesis and Structural Characterization of Y-doped Pyramidal ZnO Powders

The present study focuses on the structural changes in ZnO powder induced by doping of a rare earth metal of Y. For this aim, we synthesized four ZnO samples with different Y-content using the combustion reaction method. X-ray powder diffraction (XRPD) technique and scanning electron microscopy (SEM) results confirm that the as-investigated structural parameters and morphology of the ZnO structure were affected directly by the concentration of Y dopant. For each Y-doped sample, randomly-oriented pyramidal morphology and the formation of a minority phase of Y2O3 were observed. A gradual increase in both lattice parameters and unit cell volume was detected with increasing Y content. All samples were found to be thermally stable in the temperature interval of 25-950 °C

Catalytic Conversion of Lipophilic Substrates by Phase constrained Enzymes in the Aqueous or in the Membrane Phase

Both soluble and membrane-bound enzymes can catalyze the conversion of lipophilic substrates. The precise substrate access path, with regard to phase, has however, until now relied on conjecture from enzyme structural data only (certainly giving credible and valuable hypotheses). Alternative methods have been missing. To obtain the first experimental evidence directly determining the access paths (of lipophilic substrates) to phase constrained enzymes we here describe the application of a BODIPY-derived substrate (PS1). Using this tool, which is not accessible to cytosolic enzymes in the presence of detergent and, by contrast, not accessible to membrane embedded enzymes in the absence of detergent, we demonstrate that cytosolic and microsomal glutathione transferases (GSTs), both catalyzing the activation of PS1, do so only within their respective phases. This approach can serve as a guideline to experimentally validate substrate access paths, a fundamental property of phase restricted enzymes. Examples of other enzyme classes with members in both phases are xenobiotic-metabolizing sulphotransferases/UDP-glucuronosyl transferases or epoxide hydrolases. Since specific GSTs have been suggested to contribute to tumor drug resistance, PS1 can also be utilized as a tool to discriminate between phase constrained members of these enzymes by analyzing samples in the absence and presence of Triton X-100

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries