A mixed-mode cohesive model for delamination with isotropic damage and internal friction

This work deals with the formulation of a thermodynamically consistent, isotropic damage cohesive model for mixed-mode delamination under variable mode ratio. The proposed model is based on the introduction of an internal friction angle in the tensile case, that allows for an accurate modelling of the interaction between normal and shear openings

Simulation of fracture and delamination in layered shells due to blade cutting

A new isotropic damage cohesive model for the simulation of mixed-mode delamination is presented. The model is based on consideration of the interface internal friction, naturally leading to coupled opening and shear damage mechanisms. Mixed-mode fracture energy turns out to be a direct outcome of the model and does not require the definition of an empirical law, additional to pure Mode I and II fracture energies. The model has been developed to account for delamination processes promoted by blade cutting of carton packages

A Lagrangian PFEM approach tothe numerical simulation of 3D large scale landslides impinging in water reservoirs

Landslides are exceptional natural hazards that can generate extensive damage to structures and infrastructures causing a large number of casualties. A particularly critical condition occurs when the landslide impinges in water reservoirs generating high waves. This work proposes a numerical tool to simulate the macroscopic behavior of a propagating landslide. The Particle Finite Element Method (PFEM) is here used and adapted to the specific case of landslide runout. The Lagrangian Navier-Stokes equations of incompressible fluids are used to describe the macroscopic landslide behavior. A rigid-visco-plastic law with a pressure dependent threshold, typical of a non-Newtonian, Bingham-like fluid, is used to characterize the constitutive behavior of the flowing material. Special attention is devoted to the definition of ad-hoc pressure-dependent slip boundary conditions at the interface between the flowing mass and the basal surface to better represent the real landslide-slope interaction. The proposed approach has been validated against numerical benchmarks and small scale experimental tests, showing a good agreement with the physical measurements. Real case scenarios have also been considered. 3D geometries of critical sites, where landslides have occurred, have been reconstructed allowing for the simulation of large scale real landslide runouts. Results are compared with post-event images and measurements, showing the accuracy and the capability of the method

Cohesive crack approach to debonding analysis

Debonding of coatings from substrate due to coating compression occurs in many engineering applications. A simplified analytical approach for the estimation of the ultimate coating compression leading to debonding is developed in this paper, assuming an assigned out-of-plane defect of the coating. The formulation is based on the solution of a beam on a Pasternak (two parameters) elastic foundation, and on the assumption of a Mode I cohesive failure of the coating-substrate interface. The resulting formulas are simple and require the knowledge of a limited number of parameters

Explicit dynamics simulation of blade cutting of thin elastoplastic shells using "directional" cohesive elements in solid-shell finite element models

The intentional or accidental cutting of thin shell structures by means of a sharp object is of interest in many engineering applications. The process of cutting involves several types of nonlinearities, such as large deformations, contact, crack propagation and, in the case of laminated shells, delamination. In addition to these, a special difficulty is represented by the blade sharpness, whose accurate geometric resolution would require meshes with characteristic size of the order of the blade curvature radius. A computational finite element approach for the simulation of blade cutting of thin shells is proposed and discussed. The approach is developed in an explicit dynamics framework. Solid-shell elements are used for the discretization, in view of possible future inclusion in the model of delamination processes. Since a sharp blade can interfere with the transmission of cohesive forces between the crack flanks in the cohesive process zone, standard cohesive interface elements are not suited for the simulation of this type of problems unless extremely fine meshes, with characteristic size comparable to the blade curvature radius, are used. To circumvent the problem, the use of a new type of directional cohesive interface element, previously proposed for the simulation of crack propagation in elastic shells, is further developed and reformulated for application to the cutting of elastoplastic thin structures, discretized by solid-shell elements. The proposed approach is validated by means of application to several cutting problems of engineering interest

A thermodynamically consistent cohesive damage model for the simulation of mixed-mode delamination

This work is devoted to the formulation of a new cohesive model for mixed-mode delamination. The model is based on a thermodynamically consistent isotropic damage formulation, with consideration of an internal friction mechanism that governs the interaction between normal and shear opening modes