1,988 research outputs found

    Comparison of dimethyl sulfoxide treated highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) electrodes for use in indium tin oxide-free organic electronic photovoltaic devices

    Get PDF
    Indium tin oxide (ITO)-free organic photovoltaic (OPV) devices were fabricated using highly conductive poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as the transparent conductive electrode (TCE). The intrinsic conductivity of the PEDOT:PSS films was improved by two different dimethyl sulfoxide (DMSO) treatments – (i) DMSO was added directly to the PEDOT:PSS solution (PEDOT:PSSADD) and (ii) a pre-formed PEDOT:PSS film was immersed in DMSO (PEDOT:PSSIMM). X-ray photoelectron spectroscopy (XPS) and conductive atomic force microscopy (CAFM) studies showed a large amount of PSS was removed from the PEDOT:PSSIMM electrode surface. OPV devices based on a poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) bulk hetrojunction showed that the PEDOT:PSSIMM electrode out-performed the PEDOT:PSSADD electrode, primarily due to an increase in short circuit current density from 6.62 mA cm−2 to 7.15 mA cm−2. The results highlight the importance of optimising the treatment of PEDOT:PSS electrodes and demonstrate their potential as an alternative TCE for rapid processing and low-cost OPV and other organic electronic devices

    Lorenz-like systems and classical dynamical equations with memory forcing: a new point of view for singling out the origin of chaos

    Full text link
    A novel view for the emergence of chaos in Lorenz-like systems is presented. For such purpose, the Lorenz problem is reformulated in a classical mechanical form and it turns out to be equivalent to the problem of a damped and forced one dimensional motion of a particle in a two-well potential, with a forcing term depending on the ``memory'' of the particle past motion. The dynamics of the original Lorenz system in the new particle phase space can then be rewritten in terms of an one-dimensional first-exit-time problem. The emergence of chaos turns out to be due to the discontinuous solutions of the transcendental equation ruling the time for the particle to cross the intermediate potential wall. The whole problem is tackled analytically deriving a piecewise linearized Lorenz-like system which preserves all the essential properties of the original model.Comment: 48 pages, 25 figure

    Novel cardiac pacemaker-based human model of periodic breathing to develop real-time, pre-emptive technology for carbon dioxide stabilisation

    Get PDF
    Background: Constant flow and concentration CO2 has previously been efficacious in attenuating ventilatory oscillations in periodic breathing (PB) where oscillations in CO2 drive ventilatory oscillations. However, it has the undesirable effect of increasing end-tidal CO2, and ventilation. We tested, in a model of PB, a dynamic CO2 therapy that aims to attenuate pacemaker-induced ventilatory oscillations while minimising CO2 dose. / Methods: First, pacemakers were manipulated in 12 pacemaker recipients, 6 with heart failure (ejection fraction (EF)=23.7±7.3%) and 6 without heart failure, to experimentally induce PB. Second, we applied a real-time algorithm of pre-emptive dynamic exogenous CO2 administration, and tested different timings. / Results: We found that cardiac output alternation using pacemakers successfully induced PB. Dynamic CO2 therapy, when delivered coincident with hyperventilation, attenuated 57% of the experimentally induced oscillations in end-tidal CO2: SD/mean 0.06±0.01 untreated versus 0.04±0.01 with treatment (p<0.0001) and 0.02±0.01 in baseline non-modified breathing. This translated to a 56% reduction in induced ventilatory oscillations: SD/mean 0.19±0.09 untreated versus 0.14±0.06 with treatment (p=0.001) and 0.10±0.03 at baseline. Of note, end-tidal CO2 did not significantly rise when dynamic CO2 was applied to the model (4.84±0.47 vs 4.91± 0.45 kPa, p=0.08). Furthermore, mean ventilation was also not significantly increased by dynamic CO2 compared with untreated (7.8±1.2 vs 8.4±1.2 L/min, p=0.17). / Conclusions: Cardiac pacemaker manipulation can be used to induce PB experimentally. In this induced PB, delivering CO2 coincident with hyperventilation, ventilatory oscillations can be substantially attenuated without a significant increase in end-tidal CO2 or ventilation. Dynamic CO2 administration might be developed into a clinical treatment for PB. / Trial Registration number: ISRCTN29344450

    A constructively critical review of change and innovation-related concepts: Towards conceptual and operational clarity

    Get PDF
    The aim of this paper is to examine and clarify the nomological network of change and innovation (CI)-related constructs. A literature review in this field revealed a number of interrelated constructs that have emerged over the last decades. We examine several such constructs—innovation, creativity, proactive behaviours, job crafting, voice, taking charge, personal initiative, submitting suggestions, and extra-role behaviours. Our conceptual analysis suggests each one of these constructs represents a specific component of CI-related behaviours. However, we also found that on occasion these concepts have been dysfunctionally operationalized with evidence of three dysfunctional effects: (a) construct confusion, (b) construct drift, and (c) construct contamination. Challenges for future research to enhance conceptual and operational clarity are discussed.This paper was supported by the British Academy: [Grant number SG110409] awarded to the first author and by UK Leverhulme Trust: [Grant number IN-2012-095] awarded to the second author

    Flinders Island spotted fever rickettsioses caused by "marmionii" strain of rickettsia honei, Eastern Australia

    Get PDF
    Australia has 4 rickettsial diseases: murine typhus, Queensland tick typhus, Flinders Island spotted fever, and scrub typhus. We describe 7 cases of a rickettsiosis with an acute onset and symptoms of fever (100%), headache (71%), arthralgia (43%), myalgia (43%), cough (43%), maculopapular/petechial rash (43%), nausea (29%), pharyngitis (29%), lymphadenopathy (29%), and eschar (29%). Cases were most prevalent in autumn and from eastern Australia, including Queensland, Tasmania, and South Australia. One patient had a history of tick bite (Haemaphysalis novaeguineae). An isolate shared 99.2%, 99.8%, 99.8%, 99.9%, and 100% homology with the 17 kDa, ompA, gltA, 16S rRNA, and Sca4 genes, respectively, of Rickettsia honei. This Australian rickettsiosis has similar symptoms to Flinders Island spotted fever, and the strain is genetically related to R. honei. It has been designated the "marmionii" strain of R. honei, in honor of Australian physician and scientist Barrie Marmion

    Comparison of the solophenyl-red polarization method and the immunohistochemical analysis for collagen type III

    Get PDF
    In the present study, we have compared the staining pattern of the Solophenyl-Red 3 BL-method for the visualization of collagen type III with the immunohistochemical staining in serial sections from 7 skin wounds (wound age 3 days up to 4 weeks) to elucidate the specifity of the histochemical staining method. Large amounts of collagen type III were clearly detectable in the investigated wounds using the immunohistochemical technique. In the sections stained with Solophenyl-Red, however, only 3 out of 7 skin lesions showed a significant positive red staining at the wound margin or in the granulation tissue, while the adjacent normal connective tissue revealed a typical intensive staining. Using polarization microscopy no characteristic bright green fibrils, as reported for collagen type 111, could be seen in the wound areas without positive Solophenyl-Red staining. Since the localization of collagen type III detected by immunohistochemistry and the presumed distribution of this collagen type by the Solophenyl-Red method was not identical, the histochemical polarization method has to be regarded as non-specific for visualization of this collagen type

    Hobson’s choice? Constraints on accessing spaces of creative production

    Get PDF
    Successful creative production is often documented to occur in urban areas that are more likely to be diverse, a source of human capital and the site of dense interactions. These accounts chart how, historically, creative industries have clustered in areas where space was once cheap in the city centre fringe and inner city areas, often leading to the development of a creative milieu, and thereby stimulating further creative production. Historical accounts of the development of creative areas demonstrate the crucial role of accessible low-cost business premises. This article reports on the findings of a case study that investigated the location decisions of firms in selected creative industry sectors in Greater Manchester. The study found that, while creative activity remains highly concentrated in the city centre, creative space there is being squeezed and some creative production is decentralizing in order to access cheaper premises. The article argues that the location choices of creative industry firms are being constrained by the extensive city centre regeneration, with the most vulnerable firms, notably the smallest and youngest, facing a Hobson’s choice of being able to access low-cost premises only in the periphery. This disrupts the delicate balance needed to sustain production and begs the broader question as to how the creative economy fits into the existing urban fabric, alongside the competing demands placed on space within a transforming industrial conurbation
    corecore