The Calais Winds took our plans away: Art therapy as shelter

© Intellect Ltd.This article examines the role of construction materials, story and group as alternative forms of shelter and crisis relief for refugees in transit in Calais, northern France. It draws on examples from an ongoing art therapy project delivered by Art Refuge UK since Autumn 2015, first in the large makeshift refugee camp known as ‘The Jungle’ and since in various settings in and around Calais, including a day centre for unaccompanied refugees.Peer reviewe

An Experimental Study of Boiling in Reduced and Zero Gravity Fields

A pool boiling apparatus was mounted on a counterweighted platform which could be dropped a distance of nine feet. By varying the size of the counterweight, the effective gravity field on the equipment was adjusted between zero and unity. A study of boiling burnout in water indicated that a variation in the critical heat flux according to the one quarter power of gravity was reasonable. A consideration of the transient burnout process was necessary in order to properly interpret the data. A photographic study of nucleate boiling showed how the velocity of freely rising vapor bubbles decreased as gravity was reduced. The bubble diameters at the time of breakoff from the heated surface were found to vary inversely as gravity to the 1/3.5 power. Motion pictures were taken to illustrate both nucleate and film boiling in the low gravity range

Probing the reaction pathway in (La_(0.8)Sr_(0.2))_(0.95)MnO_(3+δ) using libraries of thin film microelectrodes

Libraries of (La_(0.8)Sr_(0.2))_(0.95)MnO_(3+δ) (LSM) thin film microelectrodes with systematically varied thickness or growth temperature were prepared by pulsed laser deposition, and a novel robotic instrument was used to characterize these libraries in automated fashion by impedance spectroscopy. The measured impedance spectra are found to be described well by an electrochemical model based on a generalized transmission model for a mixed conducting oxide, and all trends are consistent with a reaction pathway involving oxygen reduction over the LSM surface followed by diffusion through the film and into the electrolyte substrate. The surface activity is found to be correlated with the number of exposed grain boundary sites, which decreases with either increasing film thickness (at constant growth temperature) or increasing film growth temperature (at constant thickness). These findings suggest that exposed grain boundaries in LSM films are more active than exposed grains towards the rate-limiting surface process, and that oxygen ion diffusion through polycrystalline LSM films is faster than many prior studies have concluded

Bulk Properties of the Oxygen Reduction Catalyst SrCo_(0.9)Nb_(0.1)O_(3-δ)

The perovskite SrCo_(0.9)Nb_(0.1)O_(3−δ) (SCN) has excellent electrochemical activity toward oxygen reduction, and it is also valuable as a possible model material for other state-of-the-art perovskite catalysts based on strontium and cobalt, such as Ba_(0.5)Sr_(0.5)Co_(0.8)Fe_(0.2)O_(3−δ) (BSCF). Here we report thermogravimetric, conductivity, and diffraction measurements from SCN. We find that the thermodynamic stability limits of SCN are slightly more favorable than those reported for BSCF, although both materials exhibit a slow oxidative partial decomposition under likely operating conditions. In SCN, this decomposition is thermodynamically preferred when the average formal oxidation state of cobalt is greater than ∼3.0+, but due to sluggish kinetics, metastable SCN with higher cobalt valence can be observed. The oxygen stoichiometry 3−δ varies from 2.45 to 2.70 under the conditions studied, 500–1000 °C and 10^(–4)–1 bar O_2, which encompass both stable and metastable behavior. The electronic conductivity is p-type and thermally activated, with a value at 600 °C in air of 250 S cm^(–1), comparable to that of La_(0.8)Sr_(0.2)MnO_(3−δ). The polaron migration enthalpy decreases linearly from 0.30 to 0.05 eV as 3−δ increases from 2.52 to 2.64. Thermal and chemical expansivities are also reported

Rover Low Gain Antenna Qualification for Deep Space Thermal Environments

A method to qualify the Rover Low Gain Antenna (RLGA) for use during the Mars Science Laboratory (MSL) mission has been devised. The RLGA antenna must survive all ground operations, plus the nominal 670 Martian sol mission that includes the summer and winter seasons of the Mars thermal environment. This qualification effort was performed to verify that the RLGA design, its bonding, and packaging processes are adequate. The qualification test was designed to demonstrate a survival life of three times more than all expected ground testing, plus a nominal 670 Martian sol missions. Baseline RF tests and a visual inspection were performed on the RLGA hardware before the start of the qualification test. Functional intermittent RF tests were performed during thermal chamber breaks over the course of the complete qualification test. For the return loss measurements, the RLGA antenna was moved to a test area. A vector network analyzer was calibrated over the operational frequency range of the antenna. For the RLGA, a simple return loss measurement was performed. A total of 2,010 (3 670 or 3 times mission thermal cycles) thermal cycles was performed. Visual inspection of the RLGA hardware did not show any anomalies due to the thermal cycling. The return loss measurement results of the RLGA antenna after the PQV (Package Qualification and Verification) test did not show any anomalies. The antenna pattern data taken before and after the PQV test at the uplink and downlink frequencies were unchanged. Therefore, the developed design of RLGA is qualified for a long-duration MSL mission