A Scintillating Fiber Tracker With SiPM Readout

We present a prototype for the first tracking detector consisting of 250 micron thin scintillating fibers and silicon photomultiplier (SiPM) arrays. The detector has a modular design, each module consists of a mechanical support structure of 10mm Rohacell foam between two 100 micron thin carbon fiber skins. Five layers of scintillating fibers are glued to both top and bottom of the support structure. SiPM arrays with a channel pitch of 250 micron are placed in front of the fibers. We show the results of the first module prototype using multiclad fibers of types Bicron BCF-20 and Kuraray SCSF-81M that were read out by novel 32-channel SiPM arrays from FBK-irst/INFN Perugia as well as 32-channel SiPM arrays produced by Hamamatsu. A spatial resolution of 88 micron +/- 6 micron at an average yield of 10 detected photons per minimal ionizig particle has been achieved.Comment: 5 pages, 7 figures, submitted as proceedings to the 11th Topical Seminar on Innovative Particle and Radiation Detectors (IPRD08

SiPM and front-end electronics development for Cherenkov light detection

The Italian Institute of Nuclear Physics (INFN) is involved in the development of a demonstrator for a SiPM-based camera for the Cherenkov Telescope Array (CTA) experiment, with a pixel size of 6$\times$6 mm$^2$. The camera houses about two thousands electronics channels and is both light and compact. In this framework, a R&D program for the development of SiPMs suitable for Cherenkov light detection (so called NUV SiPMs) is ongoing. Different photosensors have been produced at Fondazione Bruno Kessler (FBK), with different micro-cell dimensions and fill factors, in different geometrical arrangements. At the same time, INFN is developing front-end electronics based on the waveform sampling technique optimized for the new NUV SiPM. Measurements on 1$\times$1 mm$^2$, 3$\times$3 mm$^2$, and 6$\times$6 mm$^2$ NUV SiPMs coupled to the front-end electronics are presentedComment: In Proceedings of the 34th International Cosmic Ray Conference (ICRC2015), The Hague, The Netherlands. All CTA contributions at arXiv:1508.0589

Beam test results of the irradiated Silicon Drift Detector for ALICE

The Silicon Drift Detectors will equip two of the six cylindrical layers of high precision position sensitive detectors in the ITS of the ALICE experiment at LHC. In this paper we report the beam test results of a SDD irradiated with 1 GeV electrons. The aim of this test was to verify the radiation tolerance of the device under an electron fluence equivalent to twice particle fluence expected during 10 years of ALICE operation.Comment: 6 pages,6 figures, to appear in the proceedings of International Workshop In high Multiplicity Environments (TIME'05), 3-7 October 2005, Zurich,Switzerlan

Measurements and tests on FBK silicon sensors with an optimized electronic design for a CTA camera

In October 2013, the Italian Ministry approved the funding of a Research & Development (R&D) study, within the "Progetto Premiale TElescopi CHErenkov made in Italy (TECHE)", devoted to the development of a demonstrator for a camera for the Cherenkov Telescope Array (CTA) consortium. The demonstrator consists of a sensor plane based on the Silicon Photomultiplier (SiPM) technology and on an electronics designed for signal sampling. Preliminary tests on a matrix of sensors produced by the Fondazione Bruno Kessler (FBK-Trento, Italy) and on electronic prototypes produced by SITAEL S.p.A. will be presented. In particular, we used different designs of the electronics in order to optimize the output signals in terms of tail cancellation. This is crucial for applications where a high background is expected, as for the CTA experiment.Comment: 5 pages, 6 figures; Proceedings of the 10th Workshop on Science with the New Generation of High-Energy Gamma-ray experiments (SciNeGHE) - PoS(Scineghe2014)00

Development and tests of a new prototype detector for the XAFS beamline at Elettra Synchrotron in Trieste

The XAFS beamline at Elettra Synchrotron in Trieste combines X-ray absorption spectroscopy and X-ray diffraction to provide chemically specific structural information of materials. It operates in the energy range 2.4-27 keV by using a silicon double reflection Bragg monochromator. The fluorescence measurement is performed in place of the absorption spectroscopy when the sample transparency is too low for transmission measurements or the element to study is too diluted in the sample. We report on the development and on the preliminary tests of a new prototype detector based on Silicon Drift Detectors technology and the SIRIO ultra low noise front-end ASIC. The new system will be able to reduce drastically the time needed to perform fluorescence measurements, while keeping a short dead time and maintaining an adequate energy resolution to perform spectroscopy. The custom-made silicon sensor and the electronics are designed specifically for the beamline requirements.Comment: Proceeding of the 6YRM 12th-14th Oct 2015 - L'Aquila (Italy). Accepted for publication on Journal of Physics: Conference Serie

Characteristics of the ALICE Silicon Drift Detector

A Silicon Drift Detector (SDD) with an active area of 7.0 x 7.5 cm2 has been designed, produced and tested for the ALICE Inner Tracking System. The development of the SDD has been focussed on the capability of the detector to work without an external support to the integrated high voltage divider. Severalfeatures have been implemented in the design in order to increase the robustness and the long-term electrical stability of the detector. One of the prototypes has been tested in a pion beam at the CERN SPS. Preliminary results on the position resolution are given

Propagation of semantic information between orthophoto and 3D replica: a H-BIM system for the north transept of Pisa Cathedral

This contribution proposes a methodological approach for the transfer of annotations between orthophotos and 3D digital heritage models, relying on a mesh-based/point-based representation. The workflow leverages on the exploitation of 2D/3D projective relations and on the identification, propagation, modelling and tiling of virtual models of architectural heritage. Referring to the significant case study of Pisa Cathedral, the method is tested to ensure an informative continuum between 2D medias and 3D representations, in terms of morphology, geometry and semantic enrichment. At first, a high resolution ortho-photo is created to support studies related to conservation and restoration, e.g. to highlight degradation patterns and materials as well as to distinguish cracks, frescoed surfaces, decorations. Then, the information is translated from the 2D support to a virtual 3D mockup: this step is essential to ensure a complete understanding of the architectural heritage object, that can thus be studied in its entirety, considering its morphological complexities. The proposed approach provides a more effective system for the transfer and exchange of semantic information from high-resolution orthophotos to semantically rich 3D models, that can be fundamental even in view of the construction of Heritage-Building Information Modeling (H-BIM) environments

Correction of Dopant Concentration Fluctuation Effects in Silicon Drift Detectors

Dopant fluctuations in silicon wafers are responsible for systematic errors in the determination of the particle crossing point in silicon drift detectors. In this paper, we report on the first large scale measurement of this effect by means of a particle beam. A significant improvement of the anodic resolution has been obtained by correcting for these systematic deviations

A narrow band neutrino beam with high precision flux measurements

The ENUBET facility is a proposed narrow band neutrino beam where lepton production is monitored at single particle level in the instrumented decay tunnel. This facility addresses simultaneously the two most important challenges for the next generation of cross section experiments: a superior control of the flux and flavor composition at source and a high level of tunability and precision in the selection of the energy of the outcoming neutrinos. We report here the latest results in the development and test of the instrumentation for the decay tunnel. Special emphasis is given to irradiation tests of the photo-sensors performed at INFN-LNL and CERN in 2017 and to the first application of polysiloxane-based scintillators in high energy physics.Comment: Poster presented at NuPhys2017 (London, 20-22 December 2017). 5 pages, 2 figure

CONNECTING GEOMETRY AND SEMANTICS VIA ARTIFICIAL INTELLIGENCE: FROM 3D CLASSIFICATION OF HERITAGE DATA TO H-BIM REPRESENTATIONS

Cultural heritage information systems, such as H-BIM, are becoming more and more widespread today, thanks to their potential to bring together, around a 3D representation, the wealth of knowledge related to a given object of study. However, the reconstruction of such tools starting from 3D architectural surveying is still largely deemed as a lengthy and time-consuming process, with inherent complexities related to managing and interpreting unstructured and unorganized data derived, e.g., from laser scanning or photogrammetry. Tackling this issue and starting from reality-based surveying, the purpose of this paper is to semi-automatically reconstruct parametric representations for H-BIM-related uses, by means of the most recent 3D data classification techniques that exploit Artificial Intelligence (AI). The presented methodology consists of a first semantic segmentation phase, aiming at the automatic recognition through AI of architectural elements of historic buildings within points clouds; a Random Forest classifier is used for the classification task, evaluating each time the performance of the predictive model. At a second stage, visual programming techniques are applied to the reconstruction of a conceptual mock-up of each detected element and to the subsequent propagation of the 3D information to other objects with similar characteristics. The resulting parametric model can be used for heritage preservation and dissemination purposes, as common practices implemented in modern H-BIM documentation systems. The methodology is tailored to representative case studies related to the typology of the medieval cloister and scattered over the Tuscan territory