Att skapa en mix-template (mixningsmall) : en processbeskrivning av att skapa en mix-template som används för musikproduktion

Syftet med denna forskning är att utöka mitt eget kunnande kring skapandet av en mix-template. Detta gör jag genom att skapa min version av en mix-template i inspelningsprogrammet Cubase samt pröva resultatet i praktiken. Målet är att ha en mix-template som gör mixningsjobbet lättare och snabbare att utföra. Denna process har lett till att jag har utvecklats som mixare samt att mitt arbetssätt har förbättrats. Jag hoppas med detta arbete hjälpa andra som är intresserade av att skapa en mix-template samt klargöra processen i fråga. Frågeställningar till detta projekt är: • Hur skapar man en mix-template? • Hur använder man en mix-template i praktiken?The goal with this study is to increase my knowledge around making my own mix-template. I do this by creating my version of a mix-template in the recording software Cubase and by evaluating the results in practice. The goal is to have a mix-template that makes mixing easier and quicker to execute. This process has resulted in me developing further as a mixer and my workflow has improved. I hope this study will help others who are interested in creating a mix-template and to clarify the process behind this. Questions I am asking are: • How do you create a mix-template? • How do you use a mix-template in practice

Analysis of the Tribological Conditions in Grinding of Polycrystalline Diamond Based on Single Grain Friction Tests Using the Pin-Disk Principle

Cutting tools made of polycrystalline diamond (PCD) are used for machining of aluminum alloys, fiber-reinforced plastic composites and wood. Compared to cemented carbide tools with geometrically defined cutting edges, PCD tools offer significant advantages with respect to tool life. High demands regarding the cutting edge roughness and the quality of the rake and the flank face usually require a grinding process with diamond grinding wheels. The PCD grinding process, however, is characterized by low material removal rates and high grinding wheel wear. The material removal rate and the grinding wheel wear, in turn, highly depend on the process state variables process force and process temperature. However, the relationship between these process state variables and the process input variables is largely unknown. This work provides a contribution to the closure of this knowledge gap by means of an adapted friction law. A single grain friction test stand using the pin-disk principle was developed, which enables a measurement of the friction force and the contact zone temperature for normal forces and relative speeds that are common in PCD grinding. During the experiments, the specification of the PCD disc, the cross-sectional area of the friction sample made of monocrystalline diamond as well as the process parameters normal force and relative speed were varied. In addition, the tests were carried out without lubrication as well as with a minimum lubrication. A high correlation between the contact force and the coefficient of friction was determined. This relationship was mathematically formulated in a friction law. In addition, a direct influence of the contact force and the relative velocity on the contact zone temperature was identified. The knowledge gained leads to an improved understanding of the PCD grinding process and thus enables a more efficient grinding process design.</jats:p