Generation of entangled states of two three-level atoms in cavity QED

We present a scheme to generate maximally entangled states of two three-level atoms with a nonresonant cavity by cavity-assisted collisions. Since the cavity field is only virtually excited no quantum information will be transferred from the atoms to the cavity.Comment: accepted for publication in PR

Low-voltage organic transistors and inverters with ultra-thin fluoropolymer gate dielectric

We report on the simple fabrication of hysteresis-free and electrically stable organic field-effect transistors (OFETs) and inverters operating at voltages <1-2 V, enabled by the almost trap-free interface between the organic semiconductor and an ultra-thin (<20 nm) and highly insulating single-layer fluoropolymer gate dielectric (Cytop). OFETs with PTCDI-C13 (N,N'-ditridecylperylene-3,4,9,10-tetracarboxylicdiimide) as semiconductor exhibit outstanding transistor characteristics: very low threshold voltage (0.2V), onset at 0V, steep subthreshold swing (0.1-0.2 V/decade), no hysteresis and excellent stability against gate bias stress. It is gratifying to notice that such small OFET operating voltages can be achieved with the relatively simple processing techniques employed in this study.Comment: Accepted for publication in Applied Physics Letter

When the going gets rough – studying the effect of surface roughness on the adhesive abilities of tree frogs

Tree frogs need to adhere to surfaces of various roughnesses in their natural habitats; these include bark, leaves and rocks. Rough surfaces can alter the effectiveness of their toe pads, due to factors such as a change of real contact area and abrasion of the pad epithelium. Here, we tested the effect of surface roughness on the attachment abilities of the tree frog Litoria caerulea. This was done by testing shear and adhesive forces on artificial surfaces with controlled roughness, both on single toe pads and whole animal scales. It was shown that frogs can stick 2–3 times better on small scale roughnesses (3–6 µm asperities), producing higher adhesive and frictional forces, but relatively poorly on the larger scale roughnesses tested (58.5–562.5 µm asperities). Our experiments suggested that, on such surfaces, the pads secrete insufficient fluid to fill the space under the pad, leaving air pockets that would significantly reduce the Laplace pressure component of capillarity. Therefore, we measured how well the adhesive toe pad would conform to spherical asperities of known sizes using interference reflection microscopy. Based on experiments where the conformation of the pad to individual asperities was examined microscopically, our calculations indicate that the pad epithelium has a low elastic modulus, making it highly deformable

An identification procedure of multi-input Wiener models for the distortion analysis of nonlinear circuits

In this contribution, a system identification procedure of a two-input Wiener model suitable for the analysis of the disturbance behavior of integrated nonlinear circuits is presented. The identified block model is comprised of two linear dynamic and one static nonlinear block, which are determined using an parameterized approach. In order to characterize the linear blocks, an correlation analysis using a white noise input in combination with a model reduction scheme is adopted. After having characterized the linear blocks, from the output spectrum under single tone excitation at each input a linear set of equations will be set up, whose solution gives the coefficients of the nonlinear block. By this data based black box approach, the distortion behavior of a nonlinear circuit under the influence of an interfering signal at an arbitrary input port can be determined. Such an interfering signal can be, for example, an electromagnetic interference signal which conductively couples into the port of consideration

A design approach for integrated CMOS LC-tank oscillators using bifurcation analysis

Electrical oscillators play a decisive role in integrated transceivers for wired and wireless communication systems. In this context the study of fully integrated differential VCOs has received attention. In this paper formulas for investigations of the stability as well as the amplitude of CMOS LC tank oscillators are derived, where an overall model of nonlinear gain elements is used. By means of these results we are able to present an improved design approach which gives a deeper insight into the functionality of LC tank VCOs