Definition study for photovoltaic residential prototype system

A site evaluation was performed to assess the relative merits of different regions of the country in terms of the suitability for experimental photovoltaic powered residences. Eight sites were selected based on evaluation criteria which included population, photovoltaic systems performance and the cost of electrical energy. A parametric sensitivity analysis was performed for four selected site locations. Analytical models were developed for four different power system implementation approaches. Using the model which represents a direct (or float) charge system implementation the performance sensitivity to the following parameter variations is reported: (1) solar roof slope angle; (2) ratio of the number of series cells in the solar array to the number of series cells in the lead-acid battery; and (3) battery size. For a Cleveland site location, a system with no on site energy storage and with a maximum power tracking inverter which feeds back excess power to the utility was shown to have 19 percent greater net system output than the second place system. The experiment test plan is described. The load control and data acquisition system and the data display panel for the residence are discussed

Documentation of the current fault detection, isolation and reconfiguration software of the AIPS fault-tolerant processor

Documentation is presented of the December 1986 version of the ADA code for the fault detection, isolation, and reconfiguration (FDIR) functions of the Advanced Information processing System (AIPS) Fault-Tolerant Processor (FTP). Because the FTP is still under development and the software is constantly undergoing changes, this should not be considered final documentation of the FDIR software of the FTP

Application of Hapke photometric model to three geologic surfaces using PARABOLA bidirectional reflection data

The Geologic Remote Sensing Field Experiment (GRSFE) was conducted in July and September of 1989 to collect data with both ground and airborne instrumentation. A major objective of GRSFE was to collect data which could be used to test radiative transfer models for the extraction of composition and textural surface properties from remotely acquired data. Reported here are the initial results from an application of the Hapke photometric model, using data from the Portable Apparatus for Remote Acquisition of Bidirectional Observations of Land and Atmosphere (PARABOLA), a ground based radiometer with three spectral channels. PARABOLA data was collected in the Lunar Crater Volcanic Field in Nevada, specifically from the region of Lunar Lake, a playa. The Hapke model was found to be inadequate for three relatively common geologic surfaces (a clay-rich, hard packed surface with decimeter sized mudcracks; a cobble site, similar to a playa site, but strewn with basaltic cobbles and pebbles; and a surface mantled basalt lava flow). The model is not at fault; rather, the complexity of most geologic surfaces is not accounted for in the initial assumptions

Multiple Charge State Beam Acceleration at Atlas

A test of the acceleration of multiple charge-state uranium beams was performed at the ATLAS accelerator. A 238U+26 beam was accelerated in the ATLAS PII linac to 286 MeV (~1.2 MeV/u) and stripped in a carbon foil located 0.5 m from the entrance of the ATLAS Booster section. A 58Ni9+ 'guide' beam from the tandem injector was used to tune the Booster for 238U+38. All charge states from the stripping were injected into the booster and accelerated. Up to 94% of the beam was accelerated through the Booster linac, with losses mostly in the lower charge states. The measured beam properties of each charge state and a comparison to numerical simulations are reported in this paper.Comment: LINAC2000, MOD0

Heavy-Ion Beam Acceleration of Two-Charge States from an Ecr Ion Source

This paper describes a design for the front end of a superconducting (SC) ion linac which can accept and simultaneously accelerate two charge states of uranium from an ECR ion source. This mode of operation increases the beam current available for the heaviest ions by a factor of two. We discuss the 12 MeV/u prestripper section of the Rare Isotope Accelerator (RIA) driver linac including the LEBT, RFQ, MEBT and SC sections, with a total voltage of 112 MV. The LEBT consists of two bunchers and electrostatic quadrupoles. The fundamental frequency of both bunchers is half of the RFQ frequency. The first buncher is a multiharmonic buncher, designed to accept more than 80% of each charge state and to form bunches of extremely low longitudinal emittance (rms emittance is lower than 0.2 keV/u nsec) at the output of the RFQ. The second buncher is located directly in front of the RFQ and matches the velocity of each charge-state bunch to the design input velocity of the RFQ. We present full 3D simulations of a two-charge-state uranium beam including space charge forces in the LEBT and RFQ, realistic distributions of all electric and magnetic fields along the whole prestripper linac, and the effects of errors, evaluated for several design options for the prestripper linac. The results indicate that it is possible to accelerate two charge states while keeping emittance growth within tolerable limits.Comment: LINAC2000, MOD0

Getting Real: A Naturalistic Methodology for Using Smartphones to Collect Mediated Communications

This paper contributes an intentionally naturalistic methodology using smartphone logging technology to study communications in the wild. Smartphone logging can provide tremendous access to communications data from real environments. However, researchers must consider how it is employed to preserve naturalistic behaviors. Nine considerations are presented to this end. We also provide a description of a naturalistic logging approach that has been applied successfully to collecting mediated communications from iPhones. The methodology was designed to intentionally decrease reactivity and resulted in data that were more accurate than self-reports. Example analyses are also provided to show how data collected can be analyzed to establish empirical patterns and identify user differences. Smartphone logging technologies offer flexible capabilities to enhance access to real communications data, but methodologies employing these techniques must be designed appropriately to avoid provoking naturally occurring behaviors. Functionally, this methodology can be applied to establish empirical patterns and test specific hypotheses within the field of HCI research. Topically, this methodology can be applied to domains interested in understanding mediated communications such as mobile content and systems design, teamwork, and social networks

Multiple-Charge Beam Dynamics in an Ion Linac

There is demand for the construction of a medium-energy ion linear accelerator based on superconducting rf (SRF) technology. It must be capable of producing several hundred kilowatts of CW beams ranging from protons to uranium. A considerable amount of power is required in order to generate intense beams of rare isotopes for subsequent acceleration. At present, however, the beam power available for the heavier ions would be limited by ion source performance. To overcome this limit, we have studied the possibility of accelerating multiple-charge-state (multi-Q) beams through a linac. We show that such operation is made feasible by the large transverse and longitudinal acceptance which can be obtained in a linac using superconducting cavities. Multi-Q operation provides not only a substantial increase in beam current, but also enables the use of two strippers, thus reducing the size of linac required. Since the superconducting (SC) linac operates in CW mode, space charge effects are essentially eliminated except in the ECR/RFQ region. Therefore an effective emittance growth due to the multi-charge beam acceleration can be minimized

Beam tests of the 12 MHz RFQ RIB injector for ATLAS

Beam tests of the ANL 12 MHz Radio-Frequency Quadrupole (RFQ), designed for use as the initial element of an injector system for radioactive beams into the existing ATLAS accelerators, are in progress. Recent high-voltage tests of the RFQ without beam achieved the design intervane voltage of 100 kV cw, enabling beam tests with A /q as large as 132 using beams from the ANL Physics Division 4 MV Dynamitron accelerator facility. Although the RFQ was designed for bunched beams, initial tests have been performed with unbunched beams. Experiments with stable, unbunched beams of singly-charged /sup 132/Xe and /sup 84/Kr measured the output beam energy distribution as a function of the RFQ operating voltage. The observed energies are in excellent agreement with numerical beam simulations. (5 refs)