Low-Key Stationary and Mobile Tools for Probing the Atmospheric UHI Effect

The urban heat island (UHI) effect is created by a series of man-made surface modifications in urban areas that cause changes to the surface energy balance, resulting in higher urban surface air temperatures as compared with surrounding rural areas. Studying the UHI effect is highly amenable to hands-on undergraduate student research projects, because, among other reasons, there are low key measurement tools that allow accurate and regular stationary and mobile probing of air temperature. Here, we summarize the results of a student project at Texas A&M University that analyzed the atmospheric UHI of Bryan/College Station, a mid-size metro area in east Texas. Sling psychrometers were used for semi-regular twice daily stationary air temperature monitoring, and a low-cost electronic sensor and miniature data logger were used for mobile measurements. Stationary data from two similar, open mid-rise building locations showed typical UHI intensities of 0–2°C, while the mobile measurements identified situations with UHI intensities exceeding 6°C when traversing areas with high impervious surface fractions. Nighttime measurements showed the expected UHI intensity relations to wind speed and atmospheric pressure, while daytime data were more strongly related to urban morphology. The success of this research may encourage similar student projects that deliver baseline data to urban communities seeking to mitigate the UHI

Biomethylation of inorganic antimony compounds by an aerobic fungus: Scopulariopsis brevicaulis.

Various metals and metalloids can be converted by a variety of microorganisms to their volatile methyl derivatives. These bioconversions are important from an environmental perspective because they take place over long time periods and the products have quite different properties (e.g., transportation, toxicological) as compared to the inorganic species from which they are derived. Whereas the biomethylation of arsenic is well established, that of the closely related element antimony is not, and there are no reports of antimony methylation by monoseptic microbial cultures. We report here, for the first time, the formation of trimethylantimony [(CH3)(3)Sb] by a characterized microorganism, Scopulariopsis brevicaulis, grown aerobically in the presence of inorganic antimony. Volatile antimony evolved into the headspace above the fungal cultures was quantified by remote trapping and analysis by inductively coupled plasma-mass spectrometry (ICP-MS). The existence of biogenic trimethylantimony was established, following exclusion of oxygen from cultures after growth, by remote trapping of volatile compounds and analysis by gas chromatography with compound-specific (mass spectrometry) or element-specific (atomic absorption) detection. No other volatile product containing antimony was detected in culture headspace gases

Association of Cardiometabolic Genes with Arsenic Metabolism Biomarkers in American Indian Communities: The Strong Heart Family Study (SHFS)

BACKGROUND: Metabolism of inorganic arsenic (iAs) is subject to inter-individual variability, which is explained partly by genetic determinants. OBJECTIVES: We investigated the association of genetic variants with arsenic species and principal components of arsenic species in the Strong Heart Family Study (SHFS). METHODS: We examined variants previously associated with cardiometabolic traits (~ 200,000 from Illumina Cardio MetaboChip) or arsenic metabolism and toxicity (670) among 2,428 American Indian participants in the SHFS. Urine arsenic species were measured by high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICP-MS), and percent arsenic species [iAs, monomethylarsonate (MMA), and dimethylarsinate (DMA), divided by their sum × 100] were logit transformed. We created two orthogonal principal components that summarized iAs, MMA, and DMA and were also phenotypes for genetic analyses. Linear regression was performed for each phenotype, dependent on allele dosage of the variant. Models accounted for familial relatedness and were adjusted for age, sex, total arsenic levels, and population stratification. Single nucleotide polymorphism (SNP) associations were stratified by study site and were meta-analyzed. Bonferroni correction was used to account for multiple testing. RESULTS: Variants at 10q24 were statistically significant for all percent arsenic species and principal components of arsenic species. The index SNP for iAs%, MMA%, and DMA% (rs12768205) and for the principal components (rs3740394, rs3740393) were located near AS3MT, whose gene product catalyzes methylation of iAs to MMA and DMA. Among the candidate arsenic variant associations, functional SNPs in AS3MT and 10q24 were most significant (p < 9.33 × 10-5). CONCLUSIONS: This hypothesis-driven association study supports the role of common variants in arsenic metabolism, particularly AS3MT and 10q24. Citation: Balakrishnan P, Vaidya D, Franceschini N, Voruganti VS, Gribble MO, Haack K, Laston S, Umans JG, Francesconi KA, Goessler W, North KE, Lee E, Yracheta J, Best LG, MacCluer JW, Kent J Jr., Cole SA, Navas-Acien A. 2017. Association of cardiometabolic genes with arsenic metabolism biomarkers in American Indian communities: the Strong Heart Family Study (SHFS). Environ Health Perspect 125:15-22; http://dx.doi.org/10.1289/EHP251

Genetic variation and urine cadmium levels: ABCC1 effects in the Strong Heart Family Study

Genetic effects are suspected to influence cadmium internal dose. Our objective was to assess genetic determinants of urine cadmium in American Indian adults participating in the Strong Heart Family Study (SHFS). Urine cadmium levels and genotyped short tandem repeat (STR) markers were available on 1936 SHFS participants. We investigated heritability, including gene-by-sex and smoking interactions, and STR-based quantitative trait locus (QTL) linkage, using a variance-component decomposition approach, which incorporates the genetic information contained in the pedigrees. We also used available single nucleotide polymorphisms (SNPs) from Illumina's Metabochip and custom panel to assess whether promising QTLs associated regions could be attributed to SNPs annotated to specific genes. Median urine cadmium levels were 0.44 μg/g creatinine. The heritability of urine cadmium concentrations was 28%, with no evidence of gene-by-sex or -smoking interaction. We found strong statistical evidence for a genetic locus at chromosome 16 determining urine cadmium concentrations (Logarithm of odds score [LOD] = 3.8). Among the top 20 associated SNPs in this locus, 17 were annotated to ABCC1 (p-values from 0.0002 to 0.02), and attenuated the maximum linkage peak by a ∼40%. Suggestive QTL signals (LOD>1.9) in chromosomes 2, 6, 11, 14, and 19, showed associated SNPs in the genes NDUFA10, PDE10A, PLEKHA7, BAZ1A and CHAF1A, respectively. Our findings support that urinary cadmium levels are heritable and influenced by a QTL on chromosome 16, which was explained by genetic variation in ABCC1. Studies with extended sets of genome-wide markers are needed to confirm these findings and to identify additional metabolism and toxicity pathways for cadmium

Arsenic-gene interactions and beta-cell function in the Strong Heart Family Study

We explored arsenic-gene interactions influencing pancreatic beta-cell activity in the Strong Heart Family Study (SHFS). We considered 42 variants selected for associations with either beta-cell function (31 variants) or arsenic metabolism (11 variants) in the SHFS. Beta-cell function was calculated as homeostatic model - beta corrected for insulin resistance (cHOMA-B) by regressing homeostatic model – insulin resistance (HOMA-IR) on HOMA-B and adding mean HOMA-B. Arsenic exposure was dichotomized at the median of the sum of creatinine-corrected inorganic and organic arsenic species measured by high performance liquid chromatography-inductively coupled plasma mass spectrometry (HPLC-ICPMS). Additive GxE models for cHOMA-B were adjusted for age and ancestry, and accounted for family relationships. Models were stratified by center (Arizona, Oklahoma, North Dakota and South Dakota) and meta-analyzed. The two interactions between higher vs. lower arsenic and SNPs for cHOMA-B that were nominally significant at P &lt; 0.05 were with rs10738708 (SNP overall effect −3.91, P = 0.56; interaction effect with arsenic −31.14, P = 0.02) and rs4607517 (SNP overall effect +16.61, P = 0.03; interaction effect with arsenic +27.02, P = 0.03). The corresponding genes GCK and TUSC1 suggest oxidative stress and apoptosis as possible mechanisms for arsenic impacts on beta-cell function. No interactions were Bonferroni-significant (1.16 × 10−3). Our findings are suggestive of oligogenic moderation of arsenic impacts on pancreatic β-cell endocrine function, but were not Bonferroni-significant

The effect of an external magnetic force on cell adhesion and proliferation of magnetically labeled mesenchymal stem cells

<p>Abstract</p> <p>Background</p> <p>As the strategy for tissue regeneration using mesenchymal stem cells (MSCs) for transplantation, it is necessary that MSCs be accumulated and kept in the target area. To accumulate MSCs effectively, we developed a novel technique for a magnetic targeting system with magnetically labeled MSCs and an external magnetic force. In this study, we examined the effect of an external magnetic force on magnetically labeled MSCs in terms of cell adhesion and proliferation.</p> <p>Methods</p> <p>Magnetically labeled MSCs were plated at the bottom of an insert under the influence of an external magnetic force for 1 hour. Then the inserts were turned upside down for between 1 and 24 hours, and the number of MSCs which had fallen from the membrane was counted. The gene expression of MSCs affected magnetic force was analyzed with microarray. In the control group, the same procedure was done without the external magnetic force.</p> <p>Results</p> <p>At 1 hour after the inserts were turned upside down, the average number of fallen MSCs in the magnetic group was significantly smaller than that in the control group, indicating enhanced cell adhesion. At 24 hours, the average number of fallen MSCs in the magnetic group was also significantly smaller than that in control group. In the magnetic group, integrin alpha2, alpha6, beta3 BP, intercellular adhesion molecule-2 (ICAM-2), platelet/endothelial cell adhesion molecule-1 (PECAM-1) were upregulated. At 1, 2 and 3 weeks after incubation, there was no statistical significant difference in the numbers of MSCs in the magnetic group and control group.</p> <p>Conclusions</p> <p>The results indicate that an external magnetic force for 1 hour enhances cell adhesion of MSCs. Moreover, there is no difference in cell proliferation after using an external magnetic force on magnetically labeled MSCs.</p

Cadmium body burden and increased blood pressure in middle-aged American Indians: the Strong Heart Study

Cadmium (Cd) is an environmental pollutant that has been associated with cardiovascular disease in populations, but the relationship of Cd with hypertension has been inconsistent. We studied the association between urinary Cd concentrations, a measure of total body burden, and blood pressure in American Indians, a US population with above national average Cd burden. Urinary Cd was measured using inductively coupled plasma mass spectrometry, and adjusted for urinary creatinine concentration. Among 3714 middle-aged American Indian participants of the Strong Heart Study (mean age 56 years, 41% male, 67% ever-smokers, 23% taking antihypertensive medications), urinary Cd ranged from 0.01 to 78.48 μg g$^{-1}$ creatinine (geometric mean=0.94 μg g$^{-1}$) and it was correlated with smoking pack-year among ever-smokers (r$^{2}$=0.16, P<0.0001). Participants who were smokers were on average light-smokers (mean 10.8 pack-years), and urinary Cd was similarly elevated in light- and never-smokers (geometric means of 0.88 μg g$^{-1}$ creatinine for both categories). Log-transformed urinary Cd was significantly associated with higher systolic blood pressure in models adjusted for age, sex, geographic area, body mass index, smoking (ever vs never, and cumulative pack-years) and kidney function (mean blood pressure difference by lnCd concentration (β)=1.64, P=0.002). These associations were present among light- and never-smokers (β=2.03, P=0.002, n=2627), although not significant among never-smokers (β=1.22, P=0.18, n=1260). Cd was also associated with diastolic blood pressure among light- and never-smokers (β=0.94, P=0.004). These findings suggest that there is a relationship between Cd body burden and increased blood pressure in American Indians, a population with increased cardiovascular disease risk.This research is supported by the NHLBI HL123677-02 to NF and the NIEHS training grant (ES007141-32) to PB. MTP was supported by the Strategic Action for Research in Health sciences [CP12/03080], which is an initiatives from Carlos III Health Institute Madrid and the Spanish Ministry of Economy and Competitiveness and are co-funded with European Funds for Regional Development (FEDER)

Heritability and Preliminary Genome-Wide Linkage Analysis of Arsenic Metabolites in Urine

Background: Arsenic (III) methyltransferase (AS3MT) has been related to urine arsenic metabolites in association studies. Other genes might also play roles in arsenic metabolism and excretion

Tissue engineering of functional articular cartilage: the current status

Osteoarthritis is a degenerative joint disease characterized by pain and disability. It involves all ages and 70% of people aged >65 have some degree of osteoarthritis. Natural cartilage repair is limited because chondrocyte density and metabolism are low and cartilage has no blood supply. The results of joint-preserving treatment protocols such as debridement, mosaicplasty, perichondrium transplantation and autologous chondrocyte implantation vary largely and the average long-term result is unsatisfactory. One reason for limited clinical success is that most treatments require new cartilage to be formed at the site of a defect. However, the mechanical conditions at such sites are unfavorable for repair of the original damaged cartilage. Therefore, it is unlikely that healthy cartilage would form at these locations. The most promising method to circumvent this problem is to engineer mechanically stable cartilage ex vivo and to implant that into the damaged tissue area. This review outlines the issues related to the composition and functionality of tissue-engineered cartilage. In particular, the focus will be on the parameters cell source, signaling molecules, scaffolds and mechanical stimulation. In addition, the current status of tissue engineering of cartilage will be discussed, with the focus on extracellular matrix content, structure and its functionality