Sensor material characterisation for magnetometer application

Pengukuran dan gangguan medan magnet arus terus dan arus ulang-alik memerlukan penderia medan magnet yang mempunyai kepekaan yang tinggi dan stabil. Untuk menghasilkan penderia tersebut, ciri-ciri bahan magnet yang baik telah dikenalpasti. Beberapa jenis bahan magnet yang berbeza telah digunakan untuk mengkaji ciri-ciri dan kesannya terhadap medan magnet. Teras gelang yang diperbuat daripada bahan-bahan magnet tersebut direkabentuk dengan dimensi yang sama bagi membolehkan perbandingan dibuat dengan mudah. Selain itu, rod tunggal dan berkembar juga telah digunakan sebagai teras penderia fluxgate, untuk melihat prestasi setiap jenis penderia tersebut. Kedua-dua penderia tersebut telah diuji dengan menggunakan dua sumber bahan magnet iaitu bar magnet tetap dan solenoid dengan diameter dawai yang berbeza. Isyarat keluaran bagi setiap penderia fluxgate seterusnya diproses bagi mengenalpasti hubungannya dengan ketumpatan medan magnet

FDM preparation of bio-compatible UHMWPE polymer for artificial implant

Due to its properties of high wear, creep resistance, high stiffness and strength, Ultra-High Molecular Weight Polyethylene (UHMWPE) was developed to eliminate most metallic wear in artificial implant, which conventionally found in stainless steel, Cobalt Chromium (Co-Cr) and Titanium (Ti) alloys. UHMWPE has an ultra-high viscosity that renders continuous melt-state processes including one of the additive manufacturing processes, Fused Deposition Modeling (FDM) ineffective for making UHMWPE implant. Attempt to overcome this problem and adapting this material to FDM is by blending UHMWPE with other polyethylene including High Density Polyethylene (HDPE) and Polyethylene-Glycol (PEG) which provide adequate mechanical properties for biomedical application along with the improvement in extrudability. It was demonstrated that the inclusion of 60% HDPE fraction has improved the flowability of UHMWPE in MFI test and showing adequate thermal stability in TGA

A novel approach to the design of DSP systems using minimum complexity Finite State Machines

The paper presents a new and different approach to the design and realisation of Digital Signal Processing (DSP)systems by utilising Finite State Machines (FSM). The DSP system is modelled by mapping all its potential states into an FSM, whose complexity is usually very high. The FSM mirrors the complete functionality of the system and thus describes its behaviour in full detail. Examples for FSMs of first and second order digital recursive filters are provided and the current version of the software simulating the FSM corresponding to any linear time-invariant DSP system is described. The potential of this approach including state reduction techniques as well as the inclusion of non-linear DSP systems is also outlined, and further future research intentions are briefly explored

Selective Laser Sintering of Polymer Nanocomposites

This paper describes the fabrication and characterization of polymer nanocomposite (PNC) materials for use in the selective laser sintering (SLS) process. PNC materials are of great interest generally because of their excellent physical properties, and offer excellent potential in rapid manufacturing of structural polymeric parts. Three different nano additive materials have been used: cerium oxide IV, yttrium stabilized zirconia, and layered Hectorite clay. These materials have been used to reinforce PA6 polymer using solution blending and spray drying to create powder with particle sizes in the range of 5-40 µm. The mechanical properties and microstructure of the PNC materials have been evaluated and the results compared to those of unfilled polymer.Mechanical Engineerin

Improving the performance of QoS models in MANETs through interference monitoring and correction

Mobile Ad hoc Networks (MANETs) have been proposed for a wide variety of applications, some of which require the support of real time and multimedia services. To do so, the network should be able to offer quality of service (QoS) appropriate for the latency and throughput bounds to meet appropriate real time constraints imposed by multimedia data. Due to the limited resources such as bandwidth in a wireless medium, flows need to be prioritised in order to guarantee QoS to the flows that need it. In this research, we propose a scheme to provide QoS guarantee to high priority flows in the presence of other high as well as low priority flows so that both type of flows achieve best possible throughput and end-to-end delays. Nodes independently monitor the level of interference by checking the rates of the highest priority flows and signal corrective mechanisms when these rates fall outside of specified thresholds. This research investigates using simulations the effects of a number of important parameters in MANETs, including node speed, pause time, interference, and the dynamic monitoring and correction on system performance in static and mobile scenarios. In this report we show that the dynamic monitoring and correction provides improved QoS than fixed monitoring and correction to both high priority and low priority flows in MANETs

Pseudomonas aeruginosa bacteremia secondary to acute right leg cellulitis

Pseudomonas aeruginosa is a gram-negative bacillus that causes wide spectrum clinical infections. However, it is most frequently associated with hospital-acquired infection. In this case a 58-year-old male with underlying hypertension and dyslipidaemia was admitted for acute right leg cellulitis. Pseudomonas aeruginosa was identified from the case, though it was not a usual suspected organism. It might be due to community-acquired infection

The geology and geochronology of Al Wahbah maar crater, Harrat Kishb, Saudi Arabia

Al Wahbah is a large (∼2.2 km diameter, ∼250 m deep) maar crater in the Harrat Kishb volcanic field in western Saudi Arabia. It cuts Proterozoic basement rocks and two Quaternary basanite lava flows, and is rimmed with an eroded tuff ring of debris from the phreatomagmatic explosion that generated the crater. A scoria cone on the northern wall of the crater was dissected by the explosion and exposes a dolerite plug that was intruded immediately prior to crater formation. The dolerite plug yields a <sup>40</sup>Ar/<sup>39</sup>Ar age of 1.147 ± 0.004 Ma. This is the best possible estimate of the time Al Wahbah crater formed. It is a few tens of thousand years younger than the age of the lower and upper basalt flows, 1.261 ± 0.021 Ma and 1.178 ± 0.007 Ma respectively. A dolerite dyke exposed within the basement in the wall of the crater is dated at 1.886 ± 0.008 Ma. This is the most precise age so far determined for the initiation of basaltic volcanism of Harrat Kishb, and confirms that it is significantly younger than the other post-rift volcanic provinces in the region. This study provides constrains the timing of humid climatic conditions in the region and suggests that the Quaternary basaltic volcanism that stretches the length of the western side of the Arabian peninsula may prove to be useful for establishing palaeoclimatic conditions

MEMBANGUN SISTEM NAVIGASI DI SURABAYA MENGGUNAKAN GOOGLE MAPS API

Dijaman modern ini,kecepatan dan keakuratan informasi mengenai lokasi suatu jalan sangatlah penting untuk efisien waktu.Tujuan rancangan adalah membuat suatu perangkat lunak yang dapat memberikan informasi geografis mengenai posisi dan arah perjalanan dari satu tempat ke tempat lain di kota Surabaya. Perancangan dilakukan dengan menggunakan Google Maps API untuk menampilkan peta lokasi di Surabaya. Google Maps merupakan suatu peta yang dapat dilihat dengan menggunakan suatu browser. Cara membuat Google Maps untuk ditampilkan pada suatu web atau blog yaitu dengan membutuhkan pengetahuan mengenai PHP serta JavaScript, serta koneksi Internet yang sangat stabil. Aplikasi sistem navigasi dirancang dan dikembangkan dengan menggunakan bahasa pemograman PHP dan Javascript.Database yang digunakan yaitu MySQL. Dalam menggunakan Google Maps dengan database MySQL kita akan memiliki database lokasi dan halaman WEB yang memungkinkan pengguna memasukkan alamat dan melihat marker pada peta untuk lokasi dalam batasan jarak yang dipilih. Keyword :Google Maps API,PHP,JavaScript,MySQL