Transonic divider for gas chromatograph effluents

Transonic effluent divider system was developed which permits varying mass input of gas chromatographic effluent into mass spectrometer without affecting performance of gas chromatograph. Mechanisms of operation are described

Compact rotating cup anemometer

Compact, collapsible rotating cup anemometer is used in remote locations where portability and durability are factors in the choice of equipment. This lightweight instrument has a low wind-velocity threshold, is capable of withstanding large mechanical shocks while in its stowed configuration, and has fast response to wind fluctuations

Evaluation of a load cell model for dynamic calibration of the rotor systems research aircraft

The Rotor Systems Research Aircraft uses load cells to isolate the rotor/transmission system from the fuselage. An analytical model of the relationship between applied rotor loads and the resulting load cell measurements is derived by applying a force-and-moment balance to the isolated rotor/transmission system. The model is then used to estimate the applied loads from measured load cell data, as obtained from a ground-based shake test. Using nominal design values for the parameters, the estimation errors, for the case of lateral forcing, were shown to be on the order of the sensor measurement noise in all but the roll axis. An unmodeled external load appears to be the source of the error in this axis

The Strength of Internet Ties

Presents findings from a survey that examines how Americans use the Internet and email to support and expand their social networks and access resources for assistance in making major life decisions

An exploration of concepts of community through a case study of UK university web production

The paper explores the inter-relation and differences between the concepts of occupational community, community of practice, online community and social network. It uses as a case study illustration the domain of UK university web site production and specifically a listserv for those involved in it. Different latent occupational communities are explored, and the potential for the listserv to help realize these as an active sense of community is considered. The listserv is not (for most participants) a tight knit community of practice, indeed it fails many criteria for an online community. It is perhaps best conceived as a loose knit network of practice, valued for information, implicit support and for the maintenance of weak ties. Through the analysis the case for using strict definitions of the theoretical concepts is made

An introduction to spacecraft thermal control

External and internal passive and active methods for spacecraft thermal control - material insulation and structural propertie

Does \u2018bigger\u2019mean \u2018better\u2019? Pitfalls and shortcuts associated with big data for social research

\u2018Big data is here to stay.\u2019 This key statement has a double value: is an assumption as well as the reason why a theoretical reflection is needed. Furthermore, Big data is something that is gaining visibility and success in social sciences even, overcoming the division between humanities and computer sciences. In this contribution some considerations on the presence and the certain persistence of Big data as a socio-technical assemblage will be outlined. Therefore, the intriguing opportunities for social research linked to such interaction between practices and technological development will be developed. However, despite a promissory rhetoric, fostered by several scholars since the birth of Big data as a labelled concept, some risks are just around the corner. The claims for the methodological power of bigger and bigger datasets, as well as increasing speed in analysis and data collection, are creating a real hype in social research. Peculiar attention is needed in order to avoid some pitfalls. These risks will be analysed for what concerns the validity of the research results \u2018obtained through Big data. After a pars distruens, this contribution will conclude with a pars construens; assuming the previous critiques, a mixed methods research design approach will be described as a general proposal with the objective of stimulating a debate on the integration of Big data in complex research projecting

Study of Light Backgrounds from Relativistic Electrons in Air Light-Guides

The MOLLER experiment proposed at the Thomas Jefferson National Accelerator Facility plans a precision low energy determination of the weak mixing angle via the measurement of the parity-violating asymmetry in the scattering of high energy longitudinally polarized electrons from electrons bound in a liquid hydrogen target (M{\o}ller scattering). A relative measure of the scattering rate is planned to be obtained by intercepting the M{\o}ller scattered electrons with a circular array of thin fused silica tiles attached to air light guides, which facilitate the transport of Cherenkov photons generated within the tiles to photomultiplier tubes (PMTs). The scattered flux will also pass through the light guides of downstream tiles, generating additional Cherenkov as well as scintillation light and is a potential background. In order to estimate the rate of these backgrounds, a gas-filled tube detector was designed and deployed in an electron beam at the MAMI facility at Johannes Gutenberg University, Mainz, Germany. Described in this paper is the design of a detector to measure separately the scintillation and Cherenkov responses of gas mixtures from relativistic electrons, the results of studies of several gas mixtures with comparisons to simulations, and conclusions about the implications for the design of the MOLLER detector apparatus.Comment: Published in NIM.

Acceptance conditions in automated negotiation

In every negotiation with a deadline, one of the negotiating parties has to accept an offer to avoid a break off. A break off is usually an undesirable outcome for both parties, therefore it is important that a negotiator employs a proficient mechanism to decide under which conditions to accept. When designing such conditions one is faced with the acceptance dilemma: accepting the current offer may be suboptimal, as better offers may still be presented. On the other hand, accepting too late may prevent an agreement from being reached, resulting in a break off with no gain for either party. Motivated by the challenges of bilateral negotiations between automated agents and by the results and insights of the automated negotiating agents competition (ANAC), we classify and compare state-of-the-art generic acceptance conditions. We focus on decoupled acceptance conditions, i.e. conditions that do not depend on the bidding strategy that is used. We performed extensive experiments to compare the performance of acceptance conditions in combination with a broad range of bidding strategies and negotiation domains. Furthermore we propose new acceptance conditions and we demonstrate that they outperform the other conditions that we study. In particular, it is shown that they outperform the standard acceptance condition of comparing the current offer with the offer the agent is ready to send out. We also provide insight in to why some conditions work better than others and investigate correlations between the properties of the negotiation environment and the efficacy of acceptance condition

Outlaw Community Innovations

Recent studies of outlaw communities provide qualitative evidence of their existence and the organisation of the underlying innovation processes. We provide descriptive results from a large scale survey of two online outlaw communities focussing on Microsoft's XBox. In line with previous findings, we identify two types of participants in outlaw communities - user innovators and adopters. Based on 2,256 responses, we find that users modify their XBox mainly to be able to increase the set of available functions of their XBox. Users are also motivated to modify their XBox for the sake of having fun and to conduct pirate behaviour. Finally, the results from our survey suggest that user innovators are largely intrinsically motivated by fun and the intellectual stimulation of writing code for homebrew software