GEOGRAPHIC INFORMATION SYSTEMS AND APPLIED ECONOMICS: AN INITIAL DISCUSSION OF POTENTIAL APPLICATIONS AND CONTRIBUTIONS

Geographic Information Systems (GIS) are becoming increasingly important to virtually all of the natural and social sciences. Applied economists will find that GIS can make valuable contributions to many of the problems with which they are concerned. Moreover, a great deal of the science behind GIS technology would benefit from the contributions of applied economists. This paper presents some initial suggestions for the ways in which GIS may be important to economics and the GIS related issues concerning which applied economists could provide useful insights.Research and Development/Tech Change/Emerging Technologies,

Measuring unmet need for social care among older people

Recent spending cuts in the area of adult social care raise policy concerns about the proportion of older people whose need for social care is not met. Such concerns are emphasised in the context of population ageing and other demographic changes. This briefing summarises research published in Population Trends no. 145 which explores the concept of ‘unmet need’ for Activities of Daily Living (ADLs) and Instrumental Activities of Daily Living (IADLs), using data on the receipt of support (informal, state or privately paid for). The results show that each of the three different support sectors tend to provide help for different kinds of need, and that worryingly, there is a significant level of ‘unmet need’ for certain activities

Medication-related cognitive artifacts used by older adults with heart failure

OBJECTIVE: To use a human factors perspective to examine how older adult patients with heart failure use cognitive artifacts for medication management. METHODS: We performed a secondary analysis of data collected from 30 patients and 14 informal caregivers enrolled in a larger study of heart failure self-care. Data included photographs, observation notes, interviews, video recordings, medical record data, and surveys. These data were analyzed using an iterative content analysis. RESULTS: Findings revealed that medication management was complex, inseparable from other patient activities, distributed across people, time, and place, and complicated by knowledge gaps. We identified fifteen types of cognitive artifacts including medical devices, pillboxes, medication lists, and electronic personal health records used for: 1) measurement/evaluation; 2) tracking/communication; 3) organization/administration; and 4) information/sensemaking. These artifacts were characterized by fit and misfit with the patient's sociotechnical system and demonstrated both advantages and disadvantages. We found that patients often modified or "finished the design" of existing artifacts and relied on "assemblages" of artifacts, routines, and actors to accomplish their self-care goals. CONCLUSIONS: Cognitive artifacts are useful but sometimes are poorly designed or are not used optimally. If appropriately designed for usability and acceptance, paper-based and computer-based information technologies can improve medication management for individuals living with chronic illness. These technologies can be designed for use by patients, caregivers, and clinicians; should support collaboration and communication between these individuals; can be coupled with home-based and wearable sensor technology; and must fit their users' needs, limitations, abilities, tasks, routines, and contexts of use

Lattice thermal expansion and anisotropic displacements in urea, bromomalonic aldehyde, pentachloropyridine and naphthalene

Anisotropic displacement parameters (ADPs) are commonly used in crystallography, chemistry and related fields to describe and quantify thermal motion of atoms. Within the very recent years, these ADPs have become predictable by lattice dynamics in combination with first-principles theory. Here, we study four very different molecular crystals, namely urea, bromomalonic aldehyde, pentachloropyridine, and naphthalene, by first-principles theory to assess the quality of ADPs calculated in the quasi-harmonic approximation. In addition, we predict both thermal expansion and thermal motion within the quasi-harmonic approximation and compare the predictions with experimental data. Very reliable ADPs are calculated within the quasi-harmonic approximation for all four cases up to at least 200 K, and they turn out to be in better agreement with experiment than the harmonic ones. In one particular case, ADPs can even reliably be predicted up to room temperature. Our results also hint at the importance of normal-mode anharmonicity in the calculation of ADPs

Thioxoethenylidene (CCS) as a bridging ligand

The reaction of [Mo(≡CBr)(CO)2(Tp*)] (Tp* = hydrotris(3,5-dimethylpyrazol-1-yl)borate) with [Fe2(μ-SLi)2(CO)6] affords, inter alia, the unsymmetrical binuclear thioxoethenylidene complex [Mo2(μ,σ(C):η2(C′S)-CCS)(CO)4(Tp*)2], which may be more directly obtained from [Mo(≡CBr)(CO)2(Tp*)] and Li2S. The reaction presumably proceeds via the intermediacy of the bis(alkylidynyl)thioether complex S{C≡Mo(CO)2(Tp*)}2, which was, however, not directly observed but explored computationally and found to lie 78.6 kJ mol–1 higher in energy than the final thioxoethenylidene product. Computational interrogation of the molecules [M2(μ-C2S)(CO)2(Tp*)2] (M = Mo, W, Re, Os) reveals three plausible coordination modes for a thioxoethenylidene bridge which involve a progressive strengthening of the C–C bond and weakening of the M–C and M–S bonds, as might be expected from simple effective atomic number considerations.This work was supported by the Australian Research Council (DP130102598 and DP110101611)

Hybrid Deployable Foam Antennas and Reflectors

Hybrid deployable radio antennas and reflectors of a proposed type would feature rigid narrower apertures plus wider adjoining apertures comprising reflective surfaces supported by open-cell polymeric foam structures (see figure). The open-cell foam structure of such an antenna would be compressed for compact stowage during transport. To initiate deployment of the antenna, the foam structure would simply be released from its stowage mechanical restraint. The elasticity of the foam would drive the expansion of the foam structure to its full size and shape. There are several alternatives for fabricating a reflective surface supported by a polymeric foam structure. One approach would be to coat the foam with a metal. Another approach would be to attach a metal film or a metal-coated polymeric membrane to the foam. Yet another approach would be to attach a metal mesh to the foam. The hybrid antenna design and deployment concept as proposed offers significant advantages over other concepts for deployable antennas: 1) In the unlikely event of failure to deploy, the rigid narrow portion of the antenna would still function, providing a minimum level of assured performance. In contrast, most other concepts for deploying a large antenna from compact stowage are of an "all or nothing" nature: the antenna is not useful at all until and unless it is fully deployed. 2) Stowage and deployment would not depend on complex mechanisms or actuators, nor would it involve the use of inflatable structures. Therefore, relative to antennas deployed by use of mechanisms, actuators, or inflation systems, this antenna could be lighter, cheaper, amenable to stowage in a smaller volume, and more reliable. An open-cell polymeric (e.g., polyurethane) foam offers several advantages for use as a compressible/expandable structural material to support a large antenna or reflector aperture. A few of these advantages are the following: 3) The open cellular structure is amenable to compression to a very small volume - typically to 1/20 of its full size in one dimension. 4) At a temperature above its glass-transition temperature (T(sub g)), the foam strongly damps vibrations. Even at a temperature below T(sub g), the damping should exceed that of other materials. 5) In its macroscopic mechanical properties, an open-cell foam is isotropic. This isotropy facilitates computational modeling of antenna structures. 6) Through chemical formulation, the T(sub g) of an open-cell polyurethane foam can be set at a desired value between about - 100 and about 0 C. Depending on the application, it may or may not be necessary to rigidify a foam structure after deployment. If rigidification is necessary, then the T(sub g) of the foam can be tailored to exceed the temperature of the deployment environment, in conjunction with providing a heater to elasticize the foam for deployment. Once deployed, the foam would become rigidified by cooling to below T(sub g). 7) Techniques for molding or machining polymeric foams (especially including open-cell polyurethane foams) to desired sizes and shapes are well developed

Limits on the luminosity function of Ly-alpha emitters at z = 7.7

The Ly-alpha luminosity function (LF) of high-redshift Ly-alpha emitters (LAEs) is one of the few observables of the re-ionization epoch accessible to date with 8-10 m class telescopes. The evolution with redshift allows one to constrain the evolution of LAEs and their role in re-ionizing the Universe at the end of the Dark Ages. We have performed a narrow-band imaging program at 1.06 microns at the CFHT, targeting Ly-alpha emitters at redshift z ~ 7.7 in the CFHT-LS D1 field. From these observations we have derived a photometric sample of 7 LAE candidates at z ~ 7.7. We derive luminosity functions for the full sample of seven objects and for sub-samples of four objects. If the brightest objects in our sample are real, we infer a luminosity function which would be difficult to reconcile with previous work at lower redshift. More definitive conclusions will require spectroscopic confirmation.Comment: 12 pages, accepted to Astronomy and Astrophysic