Manipulating nonequilibrium magnetism through superconductors

Electrostatic control of the magnetization of a normal mesoscopic conductor is analyzed in a hybrid superconductor-normal-superconductor system. This effect stems from the interplay between the non-equilibrium condition in the normal region and the Zeeman splitting of the quasiparticle density of states of the superconductor subjected to a static in-plane magnetic field. Unexpected spin-dependent effects such as magnetization suppression, diamagnetic-like response of the susceptibility as well as spin-polarized current generation are the most remarkable features presented. The impact of scattering events is evaluated and let us show that this effect is compatible with realistic material properties and fabrication techniques.Comment: 5 pages, 4 figure

Comment on "Experimental determination of superconducting parameters for the intermetallic perovskite superconductor MgCNi3_3"

In a recent paper (Phys. Rev. {\bf B 67}, 094502 (2003)) Mao et al. investigated the bias-dependent conductance of mechanical junctions between superconducting MgCNi$_3$ and a sharp W tip. They interpreted their results in terms of 'single-particle tunneling'. We show it is more likely that current transport through those junctions is determined by thermal effects due to the huge normal-state resistivity of MgCNi$_3$. Therefore no conclusion can be drawn about the possible unconventional pairing or strong-coupling superconductivity in MgCNi$_3$.Comment: 2 pages, 1 Fig. Comment on Z. Q. Mao et al. (Phys. Rev. {\bf B 67}, 094502 (2003)

Thermal expansion, heat capacity and magnetostriction of RAl3_3 (R = Tm, Yb, Lu) single crystals

We present thermal expansion and longitudinal magnetostriction data for cubic RAl3 (R = Tm, Yb, Lu) single crystals. The thermal expansion coefficient for YbAl3 is consistent with an intermediate valence of the Yb ion, whereas the data for TmAl3 show crystal electric field contributions and have strong magnetic field dependencies. de Haas-van Alphen-like oscillations were observed in the magnetostriction data of YbAl3 and LuAl3, several new extreme orbits were measured and their effective masses were estimated. Zero and 140 kOe specific heat data taken on both LuAl3 and TmAl3 for T < 200 K allow for the determination of a CEF splitting scheme for TmAl3

Valence Fluctuations Revealed by Magnetic Field Scan: Comparison with Experiments in YbXCu_4 (X=In, Ag, Cd) and CeYIn_5 (Y=Ir, Rh)

The mechanism of how critical end points of the first-order valence transitions (FOVT) are controlled by a magnetic field is discussed. We demonstrate that the critical temperature is suppressed to be a quantum critical point (QCP) by a magnetic field. This results explain the field dependence of the isostructural FOVT observed in Ce metal and YbInCu_4. Magnetic field scan can lead to reenter in a critical valence fluctuation region. Even in the intermediate-valence materials, the QCP is induced by applying a magnetic field, at which the magnetic susceptibility also diverges. The driving force of the field-induced QCP is shown to be a cooperative phenomenon of the Zeeman effect and the Kondo effect, which creates a distinct energy scale from the Kondo temperature. The key concept is that the closeness to the QCP of the FOVT is capital in understanding Ce- and Yb-based heavy fermions. It explains the peculiar magnetic and transport responses in CeYIn_5 (Y=Ir, Rh) and metamagnetic transition in YbXCu_4 for X=In as well as the sharp contrast between X=Ag and Cd.Comment: 14 pages, 9 figures, OPEN SELECT in J. Phys. Soc. Jp

NM-Series of Representative Manufactured Nanomaterials - Zinc Oxide NM-110, NM-111, NM-112, NM-113: Characterisation and Test Item Preparation

The European Commission Joint Research Centre (JRC) provides scientific support to European Union policy regarding nanotechnology. Over the last three years, the JRC, in collaboration with international public and private partners, focused part of its work on establishing and applying a priority list (NM-Series) of Representative Manufactured Nanomaterials (RMNs) in support of one of the most comprehensive nanomaterial research programmes that is currently being carried out: the Organisation for Economic Co-operation and Development’s (OECD) Working Party on Manufactured Nanomaterials (WPMN) Sponsorship Programme; this collaborative programme ultimately enables the development and collection of data on characterisation, measurement, toxicological and eco-toxicological testing, as well as risk assessment and safety evaluation of nanomaterials (NMs). It is of utmost timely importance to make representative nanomaterials available to the international scientific community, in order to enable innovation and development of safe materials and products. The present report describes the characterisation of NM-110, NM-111, NM-112, and NM-113, RMN Zinc Oxide substances, originating from defined batches of commercially manufactured material, respectively. The NM-Series materials were subsampled in collaboration with Fraunhofer Institute for Molecular and Applied Ecology (Fh IME), in order to be made available for measurement and testing for hazard identification, risk and exposure assessment studies. The results for more than 15 endpoints are addressed in the present report, including physical-chemical properties, such as size and size distribution, crystallite size and electron microscopy images. Sample and test item preparation procedures are addressed. The RMNs are studied by a number of international laboratories. The properties of the Zinc Oxide RMNs NM-110, NM-111, NM-112, and NM-113 studied and described in this report demonstrate their relevance for use in measurement and testing studies of nanomaterials. The studies were performed in close collaboration between the PROSPECT consortium partners, the JRC, the Fraunhofer Institute for Molecular and Applied Ecology (Fh-IME), BASF AG Ludwigshafen, LGC standards, the National Physical Laboratory (NPL) as national metrology institute of the United Kingdom, the National Research Centre for the Working Environment, Denmark, CSIRO and the National Measurement Institute of Australia.JRC.D - Institute for Reference Materials and Measurements (Geel

Understanding the impact of more realistic low-dose, prolonged engineered nanomaterial exposure on genotoxicity using 3D models of the human liver

Background: With the continued integration of engineered nanomaterials (ENMs) into everyday applications, it is important to understand their potential for inducing adverse human health effects. However, standard in vitro hazard characterisation approaches suffer limitations for evaluating ENM and so it is imperative to determine these potential hazards under more physiologically relevant and realistic exposure scenarios in target organ systems, to minimise the necessity for in vivo testing. The aim of this study was to determine if acute (24 h) and prolonged (120 h) exposures to five ENMs (TiO2, ZnO, Ag, BaSO4 and CeO2) would have a significantly different toxicological outcome (cytotoxicity, (pro-)inflammatory and genotoxic response) upon 3D human HepG2 liver spheroids. In addition, this study evaluated whether a more realistic, prolonged fractionated and repeated ENM dosing regime induces a significantly different toxicity outcome in liver spheroids as compared to a single, bolus prolonged exposure. Results: Whilst it was found that the five ENMs did not impede liver functionality (e.g. albumin and urea production), induce cytotoxicity or an IL-8 (pro-)inflammatory response, all were found to cause significant genotoxicity following acute exposure. Most statistically significant genotoxic responses were not dose-dependent, with the exception of TiO2. Interestingly, the DNA damage effects observed following acute exposures, were not mirrored in the prolonged exposures, where only 0.2–5.0 μg/mL of ZnO ENMs were found to elicit significant (p ≤ 0.05) genotoxicity. When fractionated, repeated exposure regimes were performed with the test ENMs, no significant (p ≥ 0.05) difference was observed when compared to the single, bolus exposure regime. There was < 5.0% cytotoxicity observed across all exposures, and the mean difference in IL-8 cytokine release and genotoxicity between exposure regimes was 3.425 pg/mL and 0.181%, respectively. Conclusion: In conclusion, whilst there was no difference between a single, bolus or fractionated, repeated ENM prolonged exposure regimes upon the toxicological output of 3D HepG2 liver spheroids, there was a difference between acute and prolonged exposures. This study highlights the importance of evaluating more realistic ENM exposures, thereby providing a future in vitro approach to better support ENM hazard assessment in a routine and easily accessible manner.[Figure not available: see fulltext.

antiSMASH 3.0—a comprehensive resource for the genome mining of biosynthetic gene clusters

Microbial secondary metabolism constitutes a rich source of antibiotics, chemotherapeutics, insecticides and other high-value chemicals. Genome mining of gene clusters that encode the biosynthetic pathways for these metabolites has become a key methodology for novel compound discovery. In 2011, we introduced antiSMASH, a web server and stand-alone tool for the automatic genomic identification and analysis of biosynthetic gene clusters, available at http://antismash.secondarymetabolites.org. Here, we present version 3.0 of antiSMASH, which has undergone major improvements. A full integration of the recently published ClusterFinder algorithm now allows using this probabilistic algorithm to detect putative gene clusters of unknown types. Also, a new dereplication variant of the ClusterBlast module now identifies similarities of identified clusters to any of 1172 clusters with known end products. At the enzyme level, active sites of key biosynthetic enzymes are now pinpointed through a curated pattern-matching procedure and Enzyme Commission numbers are assigned to functionally classify all enzyme-coding genes. Additionally, chemical structure prediction has been improved by incorporating polyketide reduction states. Finally, in order for users to be able to organize and analyze multiple antiSMASH outputs in a private setting, a new XML output module allows offline editing of antiSMASH annotations within the Geneious software