A Thermal Management System to Reuse Thermal Waste Released by High-Power Light-Emitting Diodes

© 1963-2012 IEEE. In this article, a comprehensive and efficient thermal management system is proposed to harvest and reuse the thermal waste of high-power light-emitting diodes (HP-LEDs) for the first time. Besides a conventional cooling system, including a thermoelectric (TE) cooler (TEC), a heatsink, and a fan, the proposed thermal management system also employs a TE generator (TEG), a temperature sensor, a voltage boost converter, and a microcontroller for thermal waste recycling. In this system, some of the thermal waste released by the HP-LED is harvested by the TEG and converted into electrical energy. With the help of a voltage boost converter, the harvested electrical power is used to power a temperature sensor for monitoring the surface temperature of the HP-LED. The entire system is regulated by the microcontroller. The system is elaborately established, tested, and the results are discussed. The experimental results show that the proposed system has an output electrical power of approximately 696.5μW , which is used to power a temperature sensor as a demonstration. The sensor works well, and the discrepancy of the surface temperature of the HP-LED measured by the sensor and by a thermometer is less than 5.38%, which validates the proposed thermal management system

Attitudes on the donation of human embryos for stem cell research among Chinese IVF patients and students

Bioethical debates on the use of human embryos and oocytes for stem cell research have often been criticized for the lack of empirical insights into the perceptions and experiences of the women and couples who are asked to donate these tissues in the IVF clinic. Empirical studies that have investigated the attitudes of IVF patients and citizens on the (potential) donation of their embryos and oocytes have been scarce and have focused predominantly on the situation in Europe and Australia. This article examines the viewpoints on the donation of embryos for stem cell research among IVF patients and students in China. Research into the perceptions of patients is based on in-depth interviews with IVF patients and IVF clinicians. Research into the attitudes of students is based on a quantitative survey study (n=427). The empirical findings in this paper indicate that perceptions of the donation of human embryos for stem cell research in China are far more diverse and complex than has commonly been suggested. Claims that ethical concerns regarding the donation and use of embryos and oocytes for stem cell research are typical for Western societies but absent in China cannot be upheld. The article shows that research into the situated perceptions and cultural specificities of human tissue donation can play a crucial role in the deconstruction of politicized bioethical argumentation and the (often ill-informed) assumptions about “others” that underlie socio-ethical debates on the moral dilemmas of technology developments in the life sciences

Improving the Energy-Conversion Efficiency of a PV-TE System with an Intelligent Power-Track Switching Technique and Efficient Thermal-Management Scheme

A photovoltaic-thermoelectric (PV-TE) hybrid system can be used for efficient thermal energy utilization from the generated waste heat in PV devices. In this article, an efficient PV-TE hybrid system with intelligent power-track switching technique and thermal management based on energy conversion is proposed. To make the output power of PV-TE system stable and normalized, an incorporated stable voltage circuit is designed based on energy conversion. In addition, a control-and-monitoring strategy is launched in the system to realize the normal collecting for the output power of PV-TE system. Finally, a battery protection circuit is performed to ensure that the energy converted by the entire system is effectively stored. The experimental results show that more electrical energy about 84 034 J was obtained with our energy harvesting system than that of a single photovoltaic (PV) cell. Besides, the thermal gradient of PV cells is indirectly reduced the operation of the whole system, which is automatically monitored due to the proposed intelligent power-track switching technique

Electrospun ZnO Nanowires as Gas Sensors for Ethanol Detection

ZnO nanowires were produced using an electrospinning method and used in gas sensors for the detection of ethanol at 220 °C. This electrospinning technique allows the direct placement of ZnO nanowires during their synthesis to bridge the sensor electrodes. An excellent sensitivity of nearly 90% was obtained at a low ethanol concentration of 10 ppm, and the rest obtained at higher ethanol concentrations, up to 600 ppm, all equal to or greater than 90%

Synthesis and White-Light Emission of ZnO/HfO2: Eu Nanocables

ZnO/HfO2:Eu nanocables were prepared by radio frequency sputtering with electrospun ZnO nanofibers as cores. The well-crystallized ZnO/HfO2:Eu nanocables showed a uniform intact core–shell structure, which consisted of a hexagonal ZnO core and a monoclinic HfO2 shell. The photoluminescence properties of the samples were characterized. A white-light band emission consisted of blue, green, and red emissions was observed in the nanocables. The blue and green emissions can be attributed to the zinc vacancy and oxygen vacancy defects in ZnO/HfO2:Eu nanocables, and the yellow–red emissions are derived from the inner 4f-shell transitions of corresponding Eu3+ ions in HfO2:Eu shells. Enhanced white-light emission was observed in the nanocables. The enhancement of the emission is ascribed to the structural changes after coaxial synthesis

Engineering triangular carbon quantum dots with unprecedented narrow bandwidth emission for multicolored LEDs

Carbon quantum dots (CQDs) have emerged as promising materials for optoelectronic applications on account of carbon's intrinsic merits of high stability, low cost, and environment-friendliness. However, the CQDs usually give broad emission with full width at half maximum exceeding 80 nm, which fundamentally limit their display applications. Here we demonstrate multicolored narrow bandwidth emission (full width at half maximum of 30 nm) from triangular CQDs with a quantum yield up to 54-72%. Detailed structural and optical characterizations together with theoretical calculations reveal that the molecular purity and crystalline perfection of the triangular CQDs are key to the high color-purity. Moreover, multicolored light-emitting diodes based on these CQDs display good stability, high color-purity, and high-performance with maximum luminance of 1882-4762 cd m-2 and current efficiency of 1.22-5.11 cd A-1. This work will set the stage for developing next-generation high-performance CQDs-based light-emitting diodes. © 2018 The Author(s)