Grain refinement of DC cast magnesium alloys with intensive melt shearing

A new direct chill (DC) casting process, melt conditioned DC (MC-DC) process, has been developed for the production of high quality billets/slabs of light alloys by application of intensive melt shearing through a rotor-stator high shear device during the DC casting process. The rotor-stator high shear device provides intensive melt shearing to disperse the naturally occurring oxide films, and other inclusions, while creating a microscopic flow pattern to homogenize the temperature and composition fields in the sump. In this paper, we report the grain refining effect of intensive melt shearing in the MC-DC casting processing. Experimental results on DC casting of Mg-alloys with and without intensive melt shearing have demonstrated that the MC-DC casting process can produce magnesium alloy billets with significantly refined microstructure. Such grain refinement in the MC-DC casting process can be attributed to enhanced heterogeneous nucleation by dispersed naturally occurring oxide particles, increased nuclei survival rate in uniform temperature and compositional fields in the sump, and potential contribution from dendrite arm fragmentation

Experimental study of non-Newtonian fluid flow in microchannels

This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Non-Newtonian fluid flow in microchannels has significant applications in science and engineering. The effects of temperature and PAM solution concentrations on rheological parameters are analyzed by measuring them with rotating cylinder viscometer. Flow characteristics for deionized water and PAM solutions in fused silica microtubes with diameters ranging from 50 to 320μm, fused silica square microchannels with diameters 75 and 100μm, and stainless steel microtubes with diameters from 120 to 362μm, are studied experimentally. The test results for deionized water in microchannels are in good agreement with theoretical predictions for conventional-size channels. Friction factors of PAM solutions are much higher than theoretical predictions. With the PAM concentration reduced, the deviation is more, which is possibly caused by the significant electroviscous effect on PAM solutions flow in microchannels

Networked Control Systems: The Communication Basics and Control Methodologies

As an emerging research field, networked control systems have shown the increasing importance and attracted more and more attention in the recent years. The integration of control and communication in networked control systems has made the design and analysis of such systems a great theoretical challenge for conventional control theory. Such an integration also makes the implementation of networked control systems a necessary intermediate step towards the final convergence of control, communication, and computation. We here introduce the basics of networked control systems and then describe the state-of-the-art research in this field. We hope such a brief tutorial can be useful to inspire further development of networked control systems in both theory and potential applications

First direct observation of Dirac fermions in graphite

Originating from relativistic quantum field theory, Dirac fermions have been recently applied to study various peculiar phenomena in condensed matter physics, including the novel quantum Hall effect in graphene, magnetic field driven metal-insulator-like transition in graphite, superfluid in 3He, and the exotic pseudogap phase of high temperature superconductors. Although Dirac fermions are proposed to play a key role in these systems, so far direct experimental evidence of Dirac fermions has been limited. Here we report the first direct observation of massless Dirac fermions with linear dispersion near the Brillouin zone (BZ) corner H in graphite, coexisting with quasiparticles with parabolic dispersion near another BZ corner K. In addition, we report a large electron pocket which we attribute to defect-induced localized states. Thus, graphite presents a novel system where massless Dirac fermions, quasiparticles with finite effective mass, and defect states all contribute to the low energy electronic dynamics.Comment: Nature Physics, in pres

The use of a noninvasive and nondestructive method, microcomputed tomography, to evaluate the anti-osteoporotic activity of erxian decoction, a Chinese medicinal formula, in a rat model of menopausal osteoporosis

Aim of the study: The anti-osteoporotic activity of Erxian Decoction, a Chinese medicinal formula, in a rat model of menopausal osteoporosis was evaluated by microcomputed tomography (microCT). Materials and methods: Menopause causes a decline in both endocrine function and bone mineral density in human. In this study, 20-month-old female Sprague-Dawley-rats (SD-rats) with a low serum estradiol level and bone mineral density were employed. The anti-osteoporotic activity of EXD was assessed by the determination of trabecular material bone mineral density at the L2 mid-vertebral body after treatment. Serum estrogen levels were also determined to assess the effect of EXD on the endocrine status. Results: Results revealed a significant elevation in serum estradiol level and trabecular bone mineral density at the L2 mid-vertebral body in the EXD-treated menopausal rat model. Conclusions: The results obtained from the present investigation revealed that the EXD had anti-osteoporotic activity as evidenced by an increase of serum estradiol level and bone mineral density. ©2009 IEEE.published_or_final_versionProceedings of the 2009 2nd International Conference On Biomedical Engineering And Informatics (BMEI 2009), Tianjin, China, 17-19 October 2009, v. 1 p. 47-49, article number 530482

Broken symmetry states and divergent resistance in suspended bilayer graphene

Graphene [1] and its bilayer have generated tremendous excitement in the physics community due to their unique electronic properties [2]. The intrinsic physics of these materials, however, is partially masked by disorder, which can arise from various sources such as ripples [3] or charged impurities [4]. Recent improvements in quality have been achieved by suspending graphene flakes [5,6], yielding samples with very high mobilities and little charge inhomogeneity. Here we report the fabrication of suspended bilayer graphene devices with very little disorder. We observe fully developed quantized Hall states at magnetic fields of 0.2 T, as well as broken symmetry states at intermediate filling factors $\nu = 0$, $\pm 1$, $\pm 2$ and $\pm 3$. The devices exhibit extremely high resistance in the $\nu = 0$ state that grows with magnetic field and scales as magnetic field divided by temperature. This resistance is predominantly affected by the perpendicular component of the applied field, indicating that the broken symmetry states arise from many-body interactions.Comment: 23 pages, including 4 figures and supplementary information; accepted to Nature Physic

Transport Spectroscopy of Symmetry-Broken Insulating States in Bilayer Graphene

The flat bands in bilayer graphene(BLG) are sensitive to electric fields E\bot directed between the layers, and magnify the electron-electron interaction effects, thus making BLG an attractive platform for new two-dimensional (2D) electron physics[1-5]. Theories[6-16] have suggested the possibility of a variety of interesting broken symmetry states, some characterized by spontaneous mass gaps, when the electron-density is at the carrier neutrality point (CNP). The theoretically proposed gaps[6,7,10] in bilayer graphene are analogous[17,18] to the masses generated by broken symmetries in particle physics and give rise to large momentum-space Berry curvatures[8,19] accompanied by spontaneous quantum Hall effects[7-9]. Though recent experiments[20-23] have provided convincing evidence of strong electronic correlations near the CNP in BLG, the presence of gaps is difficult to establish because of the lack of direct spectroscopic measurements. Here we present transport measurements in ultra-clean double-gated BLG, using source-drain bias as a spectroscopic tool to resolve a gap of ~2 meV at the CNP. The gap can be closed by an electric field E\bot \sim13 mV/nm but increases monotonically with a magnetic field B, with an apparent particle-hole asymmetry above the gap, thus providing the first mapping of the ground states in BLG.Comment: 4 figure

Ripple Texturing of Suspended Graphene Atomic Membranes

Graphene is the nature's thinnest elastic membrane, with exceptional mechanical and electrical properties. We report the direct observation and creation of one-dimensional (1D) and 2D periodic ripples in suspended graphene sheets, using spontaneously and thermally induced longitudinal strains on patterned substrates, with control over their orientations and wavelengths. We also provide the first measurement of graphene's thermal expansion coefficient, which is anomalously large and negative, ~ -7x10^-6 K^-1 at 300K. Our work enables novel strain-based engineering of graphene devices.Comment: 15 pages, 4 figure

Substrate-induced band gap opening in epitaxial graphene

Graphene has shown great application potentials as the host material for next generation electronic devices. However, despite its intriguing properties, one of the biggest hurdles for graphene to be useful as an electronic material is its lacking of an energy gap in the electronic spectra. This, for example, prevents the use of graphene in making transistors. Although several proposals have been made to open a gap in graphene's electronic spectra, they all require complex engineering of the graphene layer. Here we show that when graphene is epitaxially grown on the SiC substrate, a gap of ~ 0.26 is produced. This gap decreases as the sample thickness increases and eventually approaches zero when the number of layers exceeds four. We propose that the origin of this gap is the breaking of sublattice symmetry owing to the graphene-substrate interaction. We believe our results highlight a promising direction for band gap engineering of graphene.Comment: 10 pages, 4 figures; updated reference