Structural phase transition in IrTe2_2: A combined study of optical spectroscopy and band structure calculations

Ir$_{1-x}$Pt$_x$Te$_2$ is an interesting system showing competing phenomenon between structural instability and superconductivity. Due to the large atomic numbers of Ir and Te, the spin-orbital coupling is expected to be strong in the system which may lead to nonconventional superconductivity. We grew single crystal samples of this system and investigated their electronic properties. In particular, we performed optical spectroscopic measurements, in combination with density function calculations, on the undoped compound IrTe$_2$ in an effort to elucidate the origin of the structural phase transition at 280 K. The measurement revealed a dramatic reconstruction of band structure and a significant reduction of conducting carriers below the phase transition. We elaborate that the transition is not driven by the density wave type instability but caused by the crystal field effect which further splits/separates the energy levels of Te (p$_x$, p$_y$) and Te p$_z$ bands.Comment: 16 pages, 5 figure

Measured and calculated seismic velocities and densities for granulites from xenolith occurrences and adjacent exposed lower crustal sections: A comparative study from the North China craton

Granulites from the Neogene xenolith-bearing Hannuoba alkaline basalt and from the Manjinggou-Wayaokou exposed lower crustal section in the Archean Huai'an terrain, which occurs within and surrounds the Hannuoba basalt, provide a unique opportunity for a comparative study on petrophysical properties and composition of the lower crust represented by these two types of samples. P and S wave velocities and densities of 12 Hannuoba lower crustal xenoliths and one associated spinel lherzolite xenolith as well as nine granulites and granulite-facies metasedimentary rocks from the Archean Huai'an terrain were measured in laboratory at pressures up to 600 MPa and temperatures up to 600°C. Calculations of P and S wave velocities were also made for the same suite of samples based on modal mineralogy and single-crystal velocities whose variations with composition are considered by using microprobe analyses and velocities of end members. The measured and calculated Vp at room temperature and 600 MPa, where the microcrack effect is considered to be almost eliminated, agree within 4% for rocks from the Manjinggou-Wayaokou section and the adjacent Wutai-Jining upper crustal to upper lower crustal section. In contrast, the xenoliths show systematically lower measured Vp by up to 15% relative to calculated velocities, even if decompression-induced products of kelyphite and glass are taken into account. The lower measured velocities for xenoliths are attributed to grain boundary alteration and residual porosity. This implies that although granulite xenoliths provide direct information about lower crustal constitution and chemical composition, they are not faithful samples for studying in situ seismic properties of the lower crust in terms of measured velocities due to alterations during their entrainment to the surface, which changes their physical properties significantly. In this respect, granulites from high-grade terrains are better samples because they are not subjected to significant changes during their slow transport to the surface and because physical properties depend primarily on mineralogy in addition to pressure and temperature. On the other hand, calculated velocities for granulite xenoliths are consistent with velocities for granulites from terrains, suggesting that they can be also used to infer lower crust composition by correlating with results from seismic refraction studies. Copyright 2000 by the American Geophysical Union.published_or_final_versio

Local structure adaptability through multi cations for oxygen redox accommodation in Li-Rich layered oxides

Stable lattice oxygen redox (l-OR) is the key enabler for achieving attainable high energy density in Li-rich layered oxide cathode materials for Li-ion batteries. However, the unique local structure response to oxygen redox in these materials, resulting in energy inefficiency and hysteresis, still remains elusive, preventing their potential applications. By combining the state-of-the-art neutron pair distribution function with crystal orbital overlap analysis, we directly observe the distinct local structure adaption originated from the potential O–O chemical bonds. The structure adaptability is optimized based on the nature of multi transition metals in our model compound Li1.2Ni0.13Mn0.54Co0.13O2, which accommodates the oxygen redox and at the same time preserves the global layered structure. These findings not only advance the understanding of l-OR, but also provide new perspectives in the rational design of high-energy-density cathode materials with reversible and stable l-OR

f(R) Gravities, Killing Spinor Equations, "BPS" Domain Walls and Cosmology

We derive the condition on f(R) gravities that admit Killing spinor equations and construct explicit such examples. The Killing spinor equations can be used to reduce the fourth-order differential equations of motion to the first order for both the domain wall and FLRW cosmological solutions. We obtain exact "BPS" domain walls that describe the smooth Randall-Sundrum II, AdS wormholes and the RG flow from IR to UV. We also obtain exact smooth cosmological solutions that describe the evolution from an inflationary starting point with a larger cosmological constant to an ever-expanding universe with a smaller cosmological constant. In addition, We find exact smooth solutions of pre-big bang models, bouncing or crunching universes. An important feature is that the scalar curvature R of all these metrics is varying rather than a constant. Another intriguing feature is that there are two different f(R) gravities that give rise to the same "BPS" solution. We also study linearized f(R) gravities in (A)dS vacua.Comment: 37 pages, discussion on gravity trapping in RSII modified, typos corrected, further comments and references added; version to appear in JHE

Benefits and risks of the hormetic effects of dietary isothiocyanates on cancer prevention

The isothiocyanate (ITC) sulforaphane (SFN) was shown at low levels (1-5 µM) to promote cell proliferation to 120-143% of the controls in a number of human cell lines, whilst at high levels (10-40 µM) it inhibited such cell proliferation. Similar dose responses were observed for cell migration, i.e. SFN at 2.5 µM increased cell migration in bladder cancer T24 cells to 128% whilst high levels inhibited cell migration. This hormetic action was also found in an angiogenesis assay where SFN at 2.5 µM promoted endothelial tube formation (118% of the control), whereas at 10-20 µM it caused significant inhibition. The precise mechanism by which SFN influences promotion of cell growth and migration is not known, but probably involves activation of autophagy since an autophagy inhibitor, 3-methyladenine, abolished the effect of SFN on cell migration. Moreover, low doses of SFN offered a protective effect against free-radical mediated cell death, an effect that was enhanced by co-treatment with selenium. These results suggest that SFN may either prevent or promote tumour cell growth depending on the dose and the nature of the target cells. In normal cells, the promotion of cell growth may be of benefit, but in transformed or cancer cells it may be an undesirable risk factor. In summary, ITCs have a biphasic effect on cell growth and migration. The benefits and risks of ITCs are not only determined by the doses, but are affected by interactions with Se and the measured endpoint

Screening of suitable cationic dopants for solar absorber material CZTS/Se: A first principles study

The earth abundant and non-toxic solar absorber material kesterite Cu2ZnSn(S/Se)(4) has been studied to achieve high power conversion efficiency beyond various limitations, such as secondary phases, antisite defects, band gap adjustment and microstructure. To alleviate these hurdles, we employed screening based approach to find suitable cationic dopant that can promote the current density and the theoretical maximum upper limit of the energy conversion efficiency (P(%)) of CZTS/Se solar devices. For this task, the hybrid functional (Heyd, Scuseria and Ernzerhof, HSE06) were used to study the electronic and optical properties of cation (Al, Sb, Ga, Ba) doped CZTS/Se. Our in-depth investigation reveals that the Sb atom is suitable dopant of CZTS/CZTSe and also it has comparable bulk modulus as of pure material. The optical absorption coefficient of Sb doped CZTS/Se is considerably larger than the pure materials because of easy formation of visible range exciton due to the presence of defect state below the Fermi level, which leads to an increase in the current density and P(%). Our results demonstrate that the lower formation energy, preferable energy gap and excellent optical absorption of the Sb doped CZTS/Se make it potential component for relatively high efficient solar cells

Wnt5a stimulates chemotactic migration and chemokine production in human neutrophils

Wnt5a is a ligand that activates the noncanonical Wnt signaling pathways (??-catenin-independent pathways). Human neutrophils expressed several Wnt5a receptors, such as Frizzled 2, 5 and 8. Stimulation of human neutrophils with Wnt5a caused chemotactic migration and the production of two important chemokines, CXCL8 and CCL2. CCL2 production by Wnt5a was mediated by a pertussis toxin-sensitive G-protein-dependent pathway. Wnt5a also stimulated the phosphorylation of three mitogen-activated protein kinases (MAPKs: ERK, p38 MAPK and JNK) and Akt. Inhibition of ERK, p38 MAPK or JNK by specific inhibitors induced a dramatic reduction in Wnt5a-induced CCL2 production. Supernatant collected from lipopolysaccharide-stimulated macrophages induced neutrophil chemotaxis, which was significantly inhibited by anti-Wnt5a antibody. Our results suggested that Wnt5a may contribute to neutrophil recruitment, mediating the inflammation response.open4

Study of the Decays B0 --> D(*)+D(*)-

The decays B0 --> D*+D*-, B0 --> D*+D- and B0 --> D+D- are studied in 9.7 million Y(4S) --> BBbar decays accumulated with the CLEO detector. We determine Br(B0 --> D*+D*-) = (9.9+4.2-3.3+-1.2)e-4 and limit Br(B0 --> D*+D-) < 6.3e-4 and Br(B0 --> D+D-) < 9.4e-4 at 90% confidence level (CL). We also perform the first angular analysis of the B0 --> D*+D*- decay and determine that the CP-even fraction of the final state is greater than 0.11 at 90% CL. Future measurements of the time dependence of these decays may be useful for the investigation of CP violation in neutral B meson decays.Comment: 21 pages, 5 figures, submitted to Phys. Rev.

Observation of a ppb mass threshoud enhancement in \psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p}) decay

The decay channel $\psi^\prime\to\pi^+\pi^-J/\psi(J/\psi\to\gamma p\bar{p})$ is studied using a sample of $1.06\times 10^8$ $\psi^\prime$ events collected by the BESIII experiment at BEPCII. A strong enhancement at threshold is observed in the $p\bar{p}$ invariant mass spectrum. The enhancement can be fit with an $S$-wave Breit-Wigner resonance function with a resulting peak mass of $M=1861^{+6}_{-13} {\rm (stat)}^{+7}_{-26} {\rm (syst)} {\rm MeV/}c^2$ and a narrow width that is $\Gamma<38 {\rm MeV/}c^2$ at the 90% confidence level. These results are consistent with published BESII results. These mass and width values do not match with those of any known meson resonance.Comment: 5 pages, 3 figures, submitted to Chinese Physics

Measurement of B(/\c->pKpi)

The /\c->pKpi yield has been measured in a sample of two-jet continuum events containing a both an anticharm tag (Dbar) as well as an antiproton (e+e- -> Dbar pbar X), with the antiproton in the hemisphere opposite the Dbar. Under the hypothesis that such selection criteria tag e+e- -> Dbar pbar (/\c) X events, the /\c->pkpi branching fraction can be determined by measuring the pkpi yield in the same hemisphere as the antiprotons in our Dbar pbar X sample. Combining our results from three independent types of anticharm tags, we obtain B(/\c->pKpi)=(5.0+/-0.5+/-1.2)