Frequency effect on streaming phenomenon induced by Rayleigh surface acoustic wave in microdroplets

Acoustic streaming of ink particles inside a water microdroplet generated by a surface acoustic wave(SAW) has been studied numerically using a finite volume numerical method and these results have been verified using experimental measurements. Effects of SAW excitation frequency, droplet volume, and radio-frequency (RF) power are investigated, and it has been shown that SAW excitation frequency influences the SAWattenuation length, lSAW , and hence the acoustic energy absorbed by liquid. It has also been observed that an increase of excitation frequency generally enhances the SAW streaming behavior. However, when the frequency exceeds a critical value that depends on the RF power applied to the SAW device, weaker acoustic streaming is observed resulting in less effective acoustic mixing inside the droplet. This critical value is characterised by a dimensionless ratio of droplet radius to SAWattenuation length, i.e., Rd/lSAW . With a mean value of Rd/lSAW  ≈ 1, a fast and efficient mixing can be induced, even at the lowest RF power of 0.05 mW studied in this paper. On the other hand, for the Rd/lSAW ratios much larger than ∼1, significant decreases in streaming velocities were observed, resulting in a transition from regular (strong) to irregular (weak) mixing/flow. This is attributed to an increased absorption rate of acoustic wave energy that leaks into the liquid, resulting in a reduction of the acoustic energy radiated away from the SAW interaction region towards the droplet free surface. It has been demonstrated in this study that a fast and efficient mixing process with a smaller RF power could be achieved if the ratio of Rd/lSAW  ≤ 1 in the SAW-droplet based microfluidics

Hierarchical TiO2 spheres assisted with graphene for a high performance lithium–sulfur battery

In this study, we report hierarchical TiO2 sphere–sulfur frameworks assisted with graphene as a cathode material for high performance lithium–sulfur batteries. With this strategy, the volume expansion and aggregation of sulfur nanoparticles can be effectively mitigated, thus enabling high sulfur utilization and improving the specific capacity and cycling stability of the electrode. Modification of the TiO2–S nanocomposites with graphene can trap the polysulfides via chemisorption and increase the electronic connection among various components. The graphene-assisted TiO2–S composite electrodes exhibit high specific capacity of 660 mA h g−1 at 5C with a capacity loss of only 0.04% per cycle in the prolonged charge–discharge processes at 1C

Non-specific physiological background effects of acupuncture revealed by proteomic analysis in normal rats

BACKGROUND: The total effects of adequate real acupuncture treatment consist of pathologic-specific and non-specific physiological effects. The latter may be the fundamental component of the therapeutic effects of acupuncture. This study investigated the physiological background effects of acupuncture in normal rats treated with acupuncture. METHODS: Manual acupuncture was performed on normal rats at experienced acupoints, GV14 (Dazhui), BL12 (Fengmen) and BL13 (Feishu), once every other day for two weeks. The proteomic profile of rat lung tissue was examined using 2-DE/MS-based proteomic techniques. Gene Ontology (GO) enrichment and the Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway were analyzed for differentially expressed proteins using the WebGestalt toolkit. RESULTS: In total, 25 differentially expressed protein spots were detected in the 2-DE gels. Among these spots, 24 corresponded to 20 unique proteins that were successfully identified using mass spectrometry. Subsequent GO and KEGG pathway analyses demonstrated that these altered proteins were mainly involved in biological processes, such as ‘protein stabilization’, ‘glycolysis/gluconeogenesis’ and ‘response to stimulus’. CONCLUSIONS: Our study indicated the non-specific background effects of acupuncture at acupoints GV14, BL12 and BL13 likely maintained internal homeostasis via regulation of the local stimulus response, energy metabolism, and biomolecule function balance, which may be important contributors to the therapeutic effects of acupuncture

Sea Coral-like NiCo2O4@(Ni, Co)OOH Heterojunctions for Enhancing Overall Water-Splitting

It is highly challenging to develop efficient and low-cost catalysts to meet stringent requirements on high current density for industrial water electrolysis application. We developed sea coral-like NiCo2O4@(Ni, Co)OOH heterojunctions, synthesized based on an epitaxial in-grown method using poly(ethylene glycol) (PEG) as a template, and explored its as efficient electrocatalyst for water-splitting. A two-electrode based alkaline electrolyzer was fabricated using NiCo2O4@(Ni, Co)OOH|| NiCo2O4@(Ni, Co)OOH, which achieved a current density value of 100 mA.cm−2 with a low potential of 1.83 V and high current density approached 600 mA.cm−2 at potential of 2.1 V along with a strong stability. These are superior to most reported data for the electrocatalysts operated at high current densities. In-situ calculations based on density function theory reveal that the occurrence of water-splitting on the NiCo2O4@(Ni, Co)OOH heterojunction surface. First-principles molecular dynamics simulation reveals that the stretching vibrations of metallic bonds of NiCo2O4@(Ni, Co)OOH heterojunctions open the hydrogen bonds of water. Understanding the mechanism of water-splitting at the heterojunction from in-situ theoretical calculations is helpful to develop new generation industrial catalysts

Clinical application of the paraspinal erector approach for spinal canal decompression in upper lumber burst fractures

OBJECTIVE: Percutaneous pedicle screw fixation is commonly used for upper lumber burst fractures. The direct decompression remains challenging with this minimally invasive surgery. The objective was to evaluate a novel paraspinal erector approach for effective and direct decompression in patients with canal compromise and neurologic deficit. METHOD: Patients (n = 21) with neurological deficiency and Denis B type upper lumbar burst fracture were enrolled in the study, including 14 cases in the L1 and 7 cases in the L2. The patients underwent removal of bone fragments from the spinal canal through intervertebral foramen followed by short-segment fixation. Evaluations included surgery-related, such as duration of surgery and blood loss, and 12-month follow-up, such as the kyphotic angle, the height ratio of the anterior edge of the vertebra, the ratio of sagittal canal compromise, visual analog scale (VAS), Oswestry Disability Index (ODI), and Frankel scores. RESULTS: All patients achieved direct spinal canal decompression using the paraspinal erector approach followed by percutaneous pedicle screw fixation. The mean operation time (SD) was 173 (23) min, and the mean (SD) blood loss was 301 (104) ml. Significant improvement was noted in the kyphotic angle, 26.2 ± 8.7 prior to operation versus 9.1 ± 4.7 at 12 months after operation (p <0.05); the height ratio of the anterior edge of the injured vertebra, 60 ± 16% versus 84 ± 9% (p <0.05); and the ratio of sagittal canal compromise, 46.5 ± 11.4% versus 4.3 ± 3.6% (p <0.05). Significant improvements in VAS (7.3 ± 1.2 vs. 1.9 ± 0.7, p <0.05), ODI (86.7 ± 5.8 vs. 16.7 ± 5.1, p <0.05), and Frankel scores were also noted. CONCLUSIONS: The paraspinal erector approach was effective for direct spinal canal decompression with minimal injury in the paraspinal muscles or spine. Significant improvements in spinal function and prognostics were achieved after the percutaneous pedicle screw fixation

Surface microstructures and corrosion resistance of Ni-Ti-Nb shape memory thin films

Ni-Ti-Nb and Ni-Ti shape memory thin films were sputter-deposited onto silicon substrates and annealed at 600ºC for crystallization. X-ray diffraction (XRD) measurements indicated that all of the annealed Ni-Ti-Nb films were composed of crystalline Ni-Ti (Nb) and Nb-rich grains. X-ray photoelectron spectroscopy (XPS) tests showed that the surfaces of Ni-Ti-Nb films were covered with Ti oxides, NiO and Nb2O5. The corrosion resistance of the Ni-Ti-Nb films in 3.5 wt. % NaCl solution was investigated using electrochemical tests such as open-circuit potential (OCP) and potentio-dynamic polarization tests. Ni-Ti-Nb films showed higher OCPs, higher corrosion potentials (Ecorr) and lower corrosion current densities (icorr) than the binary Ni-Ti film, which indicated a better corrosion resistance. The reason may be that Nb additions modified the passive layer on the film surface. The OCPs of Ni-Ti-Nb films increased with further Nb additions, whereas no apparent difference of Ecorr and icorr was found among the Ni-Ti-Nb films

Scaling of Anisotropic Flows and Nuclear Equation of State in Intermediate Energy Heavy Ion Collisions

Elliptic flow ($v_2$) and hexadecupole flow ($v_4$) of light clusters have been studied in details for 25 MeV/nucleon $^{86}$Kr + $^{124}$Sn at large impact parameters by Quantum Molecular Dynamics model with different potential parameters. Four parameter sets which include soft or hard equation of state (EOS) with/without symmetry energy term are used. Both number-of-nucleon ($A$) scaling of the elliptic flow versus transverse momentum ($p_t$) and the scaling of $v_4/A^{2}$ versus $(p_t/A)^2$ have been demonstrated for the light clusters in all above calculation conditions. It was also found that the ratio of $v_4/{v_2}^2$ keeps a constant of 1/2 which is independent of $p_t$ for all the light fragments. By comparisons among different combinations of EOS and symmetry potential term, the results show that the above scaling behaviors are solid which do not depend the details of potential, while the strength of flows is sensitive to EOS and symmetry potential term.Comment: 5 pages, 5 figure