The ALICE Transition Radiation Detector: Construction, operation, and performance

The Transition Radiation Detector (TRD) was designed and built to enhance the capabilities of the ALICE detector at the Large Hadron Collider (LHC). While aimed at providing electron identification and triggering, the TRD also contributes significantly to the track reconstruction and calibration in the central barrel of ALICE. In this paper the design, construction, operation, and performance of this detector are discussed. A pion rejection factor of up to 410 is achieved at a momentum of 1 GeV/c in p-Pb collisions and the resolution at high transverse momentum improves by about 40% when including the TRD information in track reconstruction. The triggering capability is demonstrated both for jet, light nuclei, and electron selection. (c) 2017 CERN for the benefit of the Authors. Published by Elsevier B.V

Measurement of D+- and D0 production in deep inelastic scattering using a lifetime tag at HERA

The production of D-+/-- and D-0-mesons has been measured with the ZEUS detector at HERA using an integrated luminosity of 133.6 pb(-1). The measurements cover the kinematic range 5 < Q(2) < 1000 GeV2, 0.02 < y < 0.7, 1.5 < p(T)(D) < 15 GeV and |eta(D)| < 1.6. Combinatorial background to the D-meson signals is reduced by using the ZEUS microvertex detector to reconstruct displaced secondary vertices. Production cross sections are compared with the predictions of next-to-leading-order QCD, which is found to describe the data well. Measurements are extrapolated to the full kinematic phase space in order to obtain the open-charm contribution, F-2(c (c) over bar), to the proton structure function, F-2

Advanced Virgo Plus. Future perspectives

While completing the commissioning phase to prepare the Virgo interferometer for the next joint Observation Run (O4), the Virgo collaboration is also finalizing the design of the next upgrades to the detector to be employed in the following Observation Run (O5). The major upgrade will concern decreasing the thermal noise limit, which will imply using very large test masses and increased laser beam size. But this will not be the only upgrade to be implemented in the break between the O4 and O5 observation runs to increase the Virgo detector strain sensitivity. The paper will cover the challenges linked to this upgrade and implications on the detector’s reach and observational potential, reflecting the talk given at 12th Cosmic Ray International Seminar - CRIS 2022 held in September 2022 in Napoli

Higher harmonic anisotropic flow measurements of charged particles in Pb-Pb collisions at 2.76 TeV

We report on the first measurement of the triangular $v_3$, quadrangular $v_4$, and pentagonal $v_5$ charged particle flow in Pb-Pb collisions at 2.76 TeV measured with the ALICE detector at the CERN Large Hadron Collider. We show that the triangular flow can be described in terms of the initial spatial anisotropy and its fluctuations, which provides strong constraints on its origin. In the most central events, where the elliptic flow $v_2$ and $v_3$ have similar magnitude, a double peaked structure in the two-particle azimuthal correlations is observed, which is often interpreted as a Mach cone response to fast partons. We show that this structure can be naturally explained from the measured anisotropic flow Fourier coefficients.Comment: 10 pages, 4 figures, published version, figures at http://aliceinfo.cern.ch/ArtSubmission/node/387

Self-adaptive approach for optimisation of passive control systems for seismic resistant buildings

The concept of passive control of the seismic response of structures was introduced to improve the performance of structures by increasing their energy dissipation and reduce or eliminate damage in the structural elements. The key task in the design of passive systems is to determine the forces in the control devices (yield/slip or post-tensioning) at each floor, that will result in best performance (e.g. minimum inter-storey drift). This can be achieved by large parametric studies in which both the maximum control force (e.g. at ground level) and the distribution of forces along the height of the structure are varied. Alternatively, optimum forces in the devices can be achieved by semi-active control, where the structure self-adapts to the earthquake. Both solutions are expensive: the first requires hundreds of non-linear response simulations in the design stage; the second needs a system of sensors, controllers and electromechanical devices. Presented here is a new Self Adaptive Optimisation Approach (SAOA) in which the self-optimisation of a semi-active system is used in the design stage and the resulting distribution of control forces is adopted as a passive system. The new approach was evaluated through comparing the simulated dynamic responses of two relatively simple benchmark structures (braced and post-tensioned) with three sets of control forces: (1) passive system with forces obtained in parametric study, (2) semi-active system with self-adapting control forces, and (3) passive system with SAOA-optimized forces. The results show good performance of the SAOA systems, indicating that SAOA offers a simple and effective solution that can replace the existing optimisation approaches for the design of passively controlled earthquake resistant structures. This study presents a novel idea of using the semi-active control as a tool for optimising a passive control system. The passive control systems can be further improved by a larger study in which the semi-active control algorithms are also optimised

Exclusive photoproduction of pi degrees up to large values of Mandelstam variables s, t, and u with CLAS

Exclusive photoproduction cross sections have been measured for the process $\gamma p \rightarrow p\pi^0(e^+e^-(\gamma))$ with the Dalitz decay final state using tagged photon energies in the range of $E_{\gamma} = 1.275-5.425$ GeV. The complete angular distribution of the final state $\pi^0$, for the entire photon energy range up to large values of $t$ and $u$, has been measured for the first time. The data obtained show that the cross section $d\sigma/dt$, at mid to large angles, decreases with energy as $s^{-6.89\pm 0.26}$. This is in agreement with the perturbative QCD quark counting rule prediction of $s^{-7}$. Paradoxically, the size of angular distribution of measured cross sections is greatly underestimated by the QCD based Generalized Parton Distribution mechanism at highest available invariant energy $s=11$ GeV$^2$. At the same time, the Regge exchange based models for $\pi^0$ photoproduction are more consistent with experimental data.Comment: 7 pages, 6 figure

Electroweak measurements in electron–positron collisions at w-boson-pair energies at lep

Contains fulltext : 121524.pdf (preprint version ) (Open Access