Observational Constraints on Phantom Crossing DGP Gravity

We study the observational constraints on the Phantom Crossing DGP model. We demonstrate that the crossing of the phantom divide does not occur within the framework of the original Dvali-Gabadadze-Porrati (DGP) model or the DGP model developed by Dvali and Turner. By extending their model in the framework of an extra dimension scenario, we study a model that realizes crossing of the phantom divide. We investigate the cosmological constraints obtained from the recent observational data of Type Ia Supernovae, Cosmic Microwave Background anisotropies, and Baryon Acoustic Oscillations. The best fit values of the parameters with 1$\sigma$ (68%) errors for the Phantom Crossing DGP model are $\Omega_{m,0}=0.27^{+0.02}_{-0.02}$, $\beta=0.54^{+0.24}_{-0.30}$. We find that the Phantom Crossing DGP model is more compatible with the observations than the original DGP model or the DGP model developed by Dvali and Turner. Our model can realize late-time acceleration of the universe, similar to that of $\Lambda$CDM model, without dark energy due to the effect of DGP gravity. In our model, crossing of the phantom divide occurs at a redshift of $z \sim 0.2$.Comment: 17 pages, 9 figures, 1 table, Accepted for publication in International Journal of Modern Physics

Seismic vulnerability assessment and evaluation of high rise buildings in Islamabad

Primarily the aim of this research is to carry out seismic evaluation study of buildings structures in Islamabad in order to propose basic guidelines and suggestions for Pakistan Code. Knowing the important nature of the subject, the earthquake based organizations are serious to compile a document for seismic threatened countries and areas. It is aimed that the document will work as a guideline source for the seismic evaluation, calculation and assessment of strength, behavior and expected performance and also the safety of already existing buildings. This study is based on review of already available documents on seismic vulnerability and evaluation of present buildings at different sites is carried out in order to know the key components of this very procedure so that it can be used in Pakistan and also in other developing countries as well. This would not only be robust, safe and reliable, but also can be convenient to use within the domain of available resources. ASCE 31-03 guidelines among the available documents are considered to be a suitable and the most reliable for to be in Pakistan

On entropy, specific heat, susceptibility and Rushbrooke inequality in percolation

We investigate percolation, a probabilistic model for continuous phase transition (CPT), on square and weighted planar stochastic lattices. In its thermal counterpart, entropy is minimally low where order parameter (OP) is maximally high and vice versa. Besides, specific heat, OP and susceptibility exhibit power-law when approaching the critical point and the corresponding critical exponents $\alpha, \beta, \gamma$ respectably obey the Rushbrooke inequality (RI) $\alpha+2\beta+\gamma\geq 2$. Their analogues in percolation, however, remain elusive. We define entropy, specific heat and redefine susceptibility for percolation and show that they behave exactly in the same way as their thermal counterpart. We also show that RI holds for both the lattices albeit they belong to different universality classes.Comment: 5 pages, 3 captioned figures, to appear as a Rapid Communication in Physical Review E, 201

Implementasi Perda Nomor 1 Tahun 2012 Tentang Kawasan tanpa Rokok di Kota Bukittinggi ( Studi pada Angkutan Umum )

Alam Syahuri, Nim: 1201135119. Implementation Regulation No. 1 Year 2012 on Smoking Area In Bukittinggi. (Study on Public Transportation). Guided by Zulkarnaini,S.Sos,.M.SINo Smoking Area establishment on Public Transportation was an act as protection for the people to the risk of healt problems for effect smoking act absorbed that purposely or involuntary. No smoking area has to be implemented at health facility, school, playground, worship pleace, office, and other public places. In fact,the offenders of on smoking area was not yet gave strict punishment, bad suggestion and lead to offender. This could be seen on many chauffeur and passenger to smoking area on public transportation.The porpose of this research was to analize implementation Non Smoking Area in Bukittinggi city and to know the influenced factor.This research using Van Meter Van Horn theory.The result of this research shows that implementation non smoking area in bukittiggi city (Study on Public Transportation) not totality implemented yet eventhough it already has clear standars, goals, and objectives. Human resource the monitoring of non smoking area team is clear. Coordination and communication between government agency running well and the execution of task fit in with the regulation. Factors that become an obstade in the implementation is less by action smoking area supervisory team and civil service police uni

Challenges in compression testing of 3D angle-interlocked woven-glass fabric-reinforced polymeric composites.

This paper describes the challenges in using testing standards such as D6641/D6641M-14, for determination of compressive strength of 3D angle interlocked glass fabric reinforced polymeric composites (3D-FRPC). It makes use of both experimental investigation and finite element analysis. The experimental investigation involved testing both 2D and 3D-FRPC using ASTM D6641/D6641M-14 and subsequent scanning electron microscopic imaging of failed specimens to reveal the stress state at failure. This was further evaluated using laminate level finite element (FE) analysis. The FE analysis required input of effective orthotropic elastic material properties of 3D-FRPC, which were determined by customizing a recently developed micro-mechanical model. The paper sheds new light on compressive failure of 3D angle interlocked glass fabric composites, as only scarce data is available in literature about this class of materials. It showed that although the tests produce acceptable strength values the internal failure mechanisms change significantly and the standard deviation (SD) and coefficient of variance (COV) of 3D-FRPC comes out to be much higher than that of 2D-FRPC. Moreover, while reporting and using the test data some additional information about the 3D-fabric architecture, such as the direction of angle interlocking fabric needs to be specified. This was because, for 3D angle interlocking of fabric along warp direction, the strength values obtained in the warp and weft direction were significantly different from each other. The study also highlights that due to complex weave architecture it is not possible to achieve comparable volume fractions with 2D and 3D fabric reinforced composites using similar manufacturing parameters for the vacuum assisted resin infusion process. Thus, the normalized compressive strength values (normalized with respect to volume fraction) are the highest for 3D-FRPC when measured along the warp direction, they are at an intermediate level for 2D-FRPC and the lowest for 3D-FRPC, when measured in the weft direction.DelPHE 780 Project grant (DFID UK

Polarization rotator based on augmented low-index-guiding waveguide on silicon nitride/silicon-on-insulator platform

Using a newly proposed augmented low-index-guiding scheme with silicon nitride/silicon dual-core waveguide, we have designed, fabricated, and characterized a transverse electric (TE) to transverse magnetic (TM) and TM-to-TE compact polarization rotator. The polarization rotation is realized in an asymmetric directional coupler. The measured peak conversion efficiencies for the TE-to-TM and TM-to-TE rotations are approximately 97%. The measured polarization extinction ratio for the TE-to-TM rotation is greater than 20 dB over 50-nm bandwidth, while for the TM-to-TE rotation it is greater than 15 dB over the C-band

MEDIA OPTIMIZATION FOR BIOPROTEINS PRODUCTION FROM CHEAPER CARBON SOURCE

There are high demands for animal and human food supply especially protein, which is an important dietary component. Agricultural wastes, cheap carbon sources- which are rich and have high energy, can be used for producing the value added bioprotein. A lab scale study was carried out to optimize the media composition for bioprotein production from a cheaper carbon source - wheat flour using potential strain, which was selected earlier by screening different microorganisms. The performance of the selected strain was enhanced by media optimization with varied substrate concentration, nitrogen sources and nutrient supplementation according to the central composite design from STATISTICA software. Statistical optimization was carried out to evaluate the polynomial regression model through effect of linear, quadratic and interaction of the factors. The maximum biomass produced was 21.89 g/L with optimum fermentation conditions of wheat flour (4 g/L), nitrogen concentration (0.5 g/L), nutrient concentration (0.1 g/L), and four days of fermentation

Lepton interferometry in relativistic heavy ion collisions - a case study

We propose intensity interferometry with identical lepton pairs as an efficient tool for the estimation of the source size of the expanding hot zone produced in relativistic heavy ion collisions. This can act as a complementary method to two photon interferometry. The correlation function of two electrons with the same helicity has been evaluated for RHIC energies. The thermal shift of the rho meson mass has negligible effects on the HBT radii.Comment: 5 pages and 2 figure

Probing the QGP Phase Boundary with Thermal Properties of ϕ\phi Mesons

A novel attempt has been made to probe the QCD phase boundary by using the experimental data for transverse momenta of {\phi} mesons produced in nuclear collisions at AGS, SPS and RHIC energies. The data are confronted with simple thermodynamic expectations and lattice QCD results. The experimental data indicate a first-order phase transition, with a mixed phase stretching the energy density between \sim1 and 3.2 GeV/fm3 corresponding to SPS energies.Comment: 8-pages, 3-figs, Replaced with the published versio

Separate Submission of Standard Lymphadenectomy in 6 Packets Versus En Bloc Lymphadenectomy in Bladder Cancer

Introduction:Our aim was to evaluate detection of nodal metastasis during radical cystectomy with standard pelvic lymph node dissection versus en bloc lymphadenectomy for the treatment of bladder cancer. Materials And Methods: Hospital records of a total of 77 Patients with radical cystectomy and either standard pelvic lymph node dissection or en bloc lymphadenectomy were reviewed. Nodal dissection specimens during standard lymphadenectomy were sent for pathology examination in 6 separate containers marked as external iliac, internal iliac, and obturator groups from both sides. En bloc dissection specimens were sent in 2 containers marked as the right and the left pelvic nodes. Clinical and pathological findings of these two groups were compared in terms of the number of dissected lymph nodes, number of nodes with metastasis, lymph node density, and clinical outcomes. Results: There were 34 Patients with standard lymph node dissection and 43 with en bloc lymphadenectomy (anterior pelvic exenteration). Age, sex, duration of the disease, number of transurethral resections prior to cystectomy, pathological grade at cystectomy, and stage of the primary tumor were comparable in the two groups of Patients. The median numbers of nodes removed per Patient were 15.5 (range, 4 to 48) and 7.0 (range, 1 to 24) in those with standard and en bloc lymphadenectomy, respectively (P \u3c .001). Nodal involvement was detected in 10 (29.4%) and 9 (20.9%) Patients, respectively (P = .43). Conclusions: Although nodal involvement was not significantly different between the two groups, standard lymphadenectomy submitted in 6 different containers significantly improved the nodal yield over en bloc resection. Obturator nodes were the most commonly involved nodes in our study