Transition of a vortex ring measured by 3D scanning Tomo-PIV

A vortex ring with piston-based Reynolds number Rep=4650 is studied experimentally by means of time-resolved scanning tomographic PIV. The present measurement technique provides the so-called 4D flow field, thus enables revealing the vortex ring’s transition from laminar to turbulent. The evolution of the ring torus as well as the generation of secondary vortex filaments in transition are first observed through 3D visualization. Analysis on the quantities of the vortex ring, such as circulation and vorticity components, defines the three evolution phases, namely laminar, transition and turbulent. The ring median plane is also examined to provide further insights on flow structure exhibited in transition. The axial vorticity component and radial velocity component are studied respectively and they are found to be organized in a multi-layer concentric-ring pattern. Spectrum analysis on the radial velocity component along the ring core and inner ring where secondary vortical activity happens reveals the dominate wavenumber in transition and broad band of wavenumbers in turbulent phase

Binomial coefficients, Catalan numbers and Lucas quotients

Let $p$ be an odd prime and let $a,m$ be integers with $a>0$ and $m \not\equiv0\pmod p$. In this paper we determine $\sum_{k=0}^{p^a-1}\binom{2k}{k+d}/m^k$ mod $p^2$ for $d=0,1$; for example, $$\sum_{k=0}^{p^a-1}\frac{\binom{2k}k}{m^k}\equiv\left(\frac{m^2-4m}{p^a}\right)+\left(\frac{m^2-4m}{p^{a-1}}\right)u_{p-(\frac{m^2-4m}{p})}\pmod{p^2},$$ where $(-)$ is the Jacobi symbol, and $\{u_n\}_{n\geqslant0}$ is the Lucas sequence given by $u_0=0$, $u_1=1$ and $u_{n+1}=(m-2)u_n-u_{n-1}$ for $n=1,2,3,\ldots$. As an application, we determine $\sum_{0<k<p^a,\, k\equiv r\pmod{p-1}}C_k$ modulo $p^2$ for any integer $r$, where $C_k$ denotes the Catalan number $\binom{2k}k/(k+1)$. We also pose some related conjectures.Comment: 24 pages. Correct few typo

Coherent output of photons from coupled superconducting transmission line resonators controlled by charge qubits

We study the coherent control of microwave photons propagating in a superconducting waveguide consisting of coupled transmission line resonators, each of which is connected to a tunable charge qubit. While these coupled line resonators form an artificial photonic crystal with an engineered photonic band structure, the charge qubits collectively behave as spin waves in the low excitation limit, which modify the band-gap structure to slow and stop the microwave propagation. The conceptual exploration here suggests an electromagnetically controlled quantum device based on the on-chip circuit QED for the coherent manipulation of photons, such as the dynamic creation of laser-like output from the waveguide by pumping the artificial atoms for population inversion.Comment: 8 pages, 3 figure

The Entanglement in Anisotropic Heisenberg XYZ Chain with inhomogeneous magnetic field

The thermal entanglement of a two-qubit anisotropic Heisenberg $XYZ$ chain under an inhomogeneous magnetic field b is studied. It is shown that when inhomogeneity is increased to certain value, the entanglement can exhibit a larger revival than that of less values of b. The property is both true for zero temperature and a finite temperature. The results also show that the entanglement and critical temperature can be increased by increasing inhomogeneous exteral magnetic field

Modeling and optimization of the multichannel spark discharge

This paper reports a novel analytic model of this multichannel spark discharge, considering the delay time in the breakdown process, the electric transforming of the discharge channel from a capacitor to a resistor induced by the air breakdown, and the varying plasma resistance in the discharge process. The good agreement between the experimental and the simulated results validated the accuracy of this model. Based on this model, the influence of the circuit parameters on the maximum discharge channel number (MDCN) is investigated. Both the input voltage amplitude and the breakdown voltage threshold of each discharge channel play a critical role. With the increase of the input voltage and the decrease of the breakdown voltage, the MCDN increases almost linearly. With the increase of the discharge capacitance, the MDCN first rises and then remains almost constant. With the increase of the circuit inductance, the MDCN increases slowly but decreases quickly when the inductance increases over a certain value. There is an optimal value of the capacitor connected to the discharge channel corresponding to the MDCN. Finally, based on these results, to shorten the discharge time, a modified multichannel discharge circuit is developed and validated by the experiment. With only 6-kV input voltage, 31-channels discharge is achieved. The breakdown voltage of each electrode gap is larger than 3 kV. The modified discharge circuit is certain to be widely used in the PSJA flow control field

Bipolar High Field Excitations in Co/Cu/Co Nanopillars

Current-induced magnetic excitations in Co/Cu/Co bilayer nanopillars ($\sim$50 nm in diameter) have been studied experimentally at low temperatures for large applied fields perpendicular to the layers. At sufficiently high current densities excitations, which lead to a decrease in differential resistance, are observed for both current polarities. Such bipolar excitations are not expected in a single domain model of spin-transfer. We propose that at high current densities strong asymmetries in the longitudinal spin accumulation cause spin-wave instabilities transverse to the current direction in bilayer samples, similar to those we have reported for single magnetic layer junctions.Comment: 4 pages, 4 figures+ 2 additional jpg figures (Fig. 2d and Fig. 3) high resolution figures and recent related articles are available at: http://www.physics.nyu.edu/kentlab/news.htm

Thickness dependent magnetotransport in ultra-thin manganite films

To understand the near-interface magnetism in manganites, uniform, ultra-thin films of La_{0.67}Sr_{0.33}MnO_3 were grown epitaxially on single crystal (001) LaAlO_3 and (110) NdGaO_3 substrates. The temperature and magnetic field dependent film resistance is used to probe the film's structural and magnetic properties. A surface and/or interface related dead-layer is inferred from the thickness dependent resistance and magnetoresistance. The total thickness of the dead layer is estimated to be $\sim 30 \AA$ for films on NdGaO_3 and $\sim 50 \AA$ for films on LaAlO_3.Comment: 11 pages, 4 figure