The role of limestone and dolomite tailings’ particle size in retention of heavy metals from liquid waste

Purpose. The study aims at investigating the role of particle size of mineral tailings derived from limestone, limestone marble, dolomite and dolomitic marble in heavy metal adsorption, in both batch and fixed bed conditions, so as to estimate whether grinding and/or sieving is necessary for their utilization. Methods. Fractions of different particle size have been studied. Adsorption has been examined in batch conditions from solutions of 5 mg/l Cd, 5 mg/l Pb, 100 mg/l Cu, 100 mg/l Zn, and their mixed solution simulating electroplating wastewater, and also in fixed bed conditions. Findings. Total Cd and Cu adsorption is achieved on all the mineral fractions, whereas Pb and Zn show a difference up to 20% depending on particle size. Referring to the mixed solution, Cd and Zn adsorption is lower, whereas no significant differences in Cu and Pb adsorption are observed. Adsorption capacity rises up to 0.03 mg/g Cd, 0.60 mg/g Cu, 0.03 mg/g Pb, 0.60 mg/g Zn. In fixed bed conditions, metal adsorption greater than 93% is achieved. Furthermore, leaching not exceeding 4% indicates a good metal retention. Finally, Taguchi method has proven that the particle size effect is not so strong compared to other parameters, including solution concentration and time. Originality. The particle size of mineral tailings has not yet been investigated as a parameter affecting heavy metal adsorption. Furthermore, heavy metal adsorption has been examined from separate metal solutions and not from a mixed one. The present study aims at contributing to these two research fields. Practical implications. Τhe differences in adsorption between mineral tailings’ fractions with different particle size are not as high as to make grinding of minerals necessary.Мета. Дослідження впливу розмірів частинок у хвостах збагачення вапняку, вапняного мармуру, доломіту та доломітового мармуру на процес адсорбції важких металів у нерухомому шарі для оцінки доцільності технології подрібнення й/або просіювання в подальшому використанні металів. Методика. Для виконання досліджень зразки вапняку та доломіту доставлені компанією, що займається виробництвом і продажем готових бетонів, а також кар’єрами у Греції. Хімічний і мінералогічний склад зразків був визначений рентгенівської флуоресценцією (XRF, ARL ADVANT XP), рентгенівської дифракцією (XRD, Siemens D-500) та атомно-абсорбційною спектрометрією (AAS, VARIAN AA240FS). Для дослідження механізму адсорбції були виміряні наступні параметри: рН відповідно до ISO 6588, пористість і питома площа поверхні за допомогою N2-адсорбції (NOVA-2200, версія 6.11) та катіонообмінна ємність (CEC) відповідно до EPA 9081 на основі змішування зразка з надлишком розчину ацетату натрію, в результаті якого потім визначались додані катіони натрію для матричних катіонів. Для сорбційних експериментів були використані окремі розчини, які містять 5 мг/л Cd, 5 мг/л Pb, 100 мг/л Cu, 100 мг/л Zn, отримані з аналітичних стандартних розчинів Fluka. Після сорбційних досліджень зібрані сорбенти були піддані дослідженням вилуговування. Результати. У процесі досліджень була досягнута повна адсорбція Cd і Cu з усіх мінеральних фракцій, проте до 20% адсорбції Pb і Zn визначалася розмірами частинок. Встановлено, що величина адсорбції Cd і Zn нижче у змішаному розчині, але при цьому даний показник для Cu і Pb залишається без змін. Поглинаюча здатність зростає до 0.03 мг/г Cd, 0.60 мг/г Cu, 0.03 мг/г Pb, 0.60 мг/г Zn. В умовах нерухомого шару досягається до 93% адсорбції металів. Більше того, витік, що не перевищує 4%, свідчить про ефективність вилучення металів. Доведено за методом Тагучі, що вплив розмірів частинок не є настільки значним, щоб не враховувати роль інших параметрів, таких як концентрація розчину і час. Вилуговування іонів металів (Cd, Cu, Pb, Zn), що зберігаються на всіх мінералах після адсорбції в періодичних умовах, не перевищує 4% та вказує на те, що вони досить зберігаються на поверхні мінералів. Це є важливим результатом для подальшого використання мінералів у якості субстратів на полігонах. Наукова новизна. Вперше розміри частинок у хвостах збагачення мінералів розглянуті як параметр, який впливає на процес адсорбції важких металів, при цьому даний процес вивчений також щодо окремих розчинів металів, а не тільки їх суміші. Практична значимість. Виявленні відмінності у показниках адсорбції для фракцій частинок різного розміру не такі значущі, щоб обумовлювати необхідність їх подрібнення в технологічному процесі.Цель. Исследование влияния размеров частиц в хвостах обогащения известняка, известкового мрамора, доломита и доломитового мрамора на процесс адсорбции тяжелых металлов в неподвижном слое для оценки целесообразности технологии измельчения и/или просеивания в дальнейшем использования металлов. Методика. Для выполнения исследований образцы известняка и доломита доставлены компанией, занимающейся производством и продажей готовых бетонов, а также карьерами в Греции. Химический и минералогический состав образцов был определен рентгеновской флуоресценцией (XRF, ARL ADVANT XP), рентгеновской дифракцией (XRD, Siemens D-500) и атомно-абсорбционной спектрометрией (AAS, VARIAN AA240FS). Для исследования механизма адсорбции были измерены следующие параметры: рН в соответствии с ISO 6588, пористость и удельная площадь поверхности с помощью N2-адсорбции (NOVA-2200, версия 6.11) и катионообменная емкость (CEC) в соответствии с EPA 9081 на основе смешивания образца с избытком раствора ацетата натрия, в результате которого затем определялись добавленные катионы натрия для матричных катионов. Для сорбционных экспериментов были использованы отдельные растворы, содержащие 5 мг/л Cd, 5 мг/л Pb, 100 мг/л Cu, 100 мг/л Zn, полученные из аналитических стандартных растворов Fluka. После сорбционных исследований собранные сорбенты были подвергнуты исследованиям выщелачивания. Результаты. В процессе исследований была достигнута полная адсорбция Cd и Cu из всех минеральных фракций, однако до 20% адсорбции Pb и Zn определялась размерами частиц. Установлено, что величина адсорбции Cd и Zn ниже в смешанном растворе, но при этом данный показатель для Cu и Pb остается без изменений. Поглощающая способность возрастает до 0.03 мг/г Cd, 0.60 мг/г Cu, 0.03 мг/г Pb, 0.60 мг/г Zn. В усло-виях неподвижного слоя достигается до 93% адсорбции металлов. Более того, утечка, не превышающая 4%, свидетельствует об эффективности извлечения металлов. Доказано по методу Тагучи, что влияние размеров частиц не является настолько значительным, чтобы не учитывать роль других параметров, таких как концентрация раствора и время. Выщелачивание ионов металлов (Cd, Cu, Pb, Zn), сохраняющихся на всех минералах после адсорбции в периодических условиях, не превышает 4% и указывает на то, что они достаточно сохраняются на поверхности минералов. Это является важным результатом для дальнейшего использования минералов в качестве субстратов на полигонах. Научная новизна. Впервые размеры частиц в хвостах обогащения минералов рассмотрены как параметр, оказывающий влияние на процесс адсорбции тяжелых металлов, при этом данный процесс изучен также в отношении отдельных растворов металлов, а не только их смеси. Практическая значимость. Выявленные различия в показателях адсорбции для фракций частиц различного размера не столь значимы, чтобы обусловливать необходимость их измельчения в технологическом процессе.The present study did not originate under any of project and no funding was raised for research. However, we would like to thank especially Professor Angeliki Moutsatsou and the personal of the Laboratory of Inorganic and Analytical Chemistry of the Chemical Engineering School in the National Technical University of Athens for their various support during the experimental work required for the successful realization of the present study

Effect of Media and Estrogen on Morphological Change in Candida albicans

Introduction: Candida albicans (C. albicans), an opportunistic pathogen, lives symbiotically within the intestine of its human host. Temperature and chemical factors have been shown to induce a morphological change in C. albicans from yeast to filamentous form turning C. albicans pathogenic. In this study, we investigated the intestinal cues that might be responsible for the change. We found that different solid media impact the morphological phenotype so we focused on characterizing these before further testing. We tested Estradiol (E2) because of its known linkage to sepsis and higher levels during infections. Experiments were conducted to compare solid agar plates of YEPD, Minimal Media (MM), and Spider Media (SP) for C. albicans growth to choose the best one for further testing with E2 and other factors that could be prone to causing morphological changes. Methods: C. albicans was inoculated through streak method on different solid media (YEPD, MM, SP) and incubated at 30℃. The effect of 0.1nM E2 on C. albicans morphology was also tested. Morphological changes were assayed through bright-field microscopy. Results: Using the three different medias, we found three distinctive phenotypes: A, B, and C. Out of 6 experiments of 14 MM plates, the expressed phenotype was 86% A and 14% inconclusive of the time. 8 experiments of 17 SP plates showed 100% of phenotype B. 6 experiments of 14 YEPD plates presented phenotype C 92% of the time and 8% inconclusive. For E2 trials, 2 experiments, 6 MM plates showed 50% phenotype A and 50% inconclusive. 4 experiments, 10 SP plates had phenotype B 100%. YEPD 2 experiments, 2 plates had phenotype C at 100%. Conclusion: We have established experimental conditions of media controls for further testing whether E2 and other cues, such as inflammatory cytokines, have inhibitory or positive effects on the growth of C. albicans

A market analysis for high efficiency multi-junction solar cells grown on SiGe

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Materials Science and Engineering, 2007.Includes bibliographical references (leaves 50-53).Applications, markets and a cost model are presented for III-V multi-junction solar cells built on compositionally graded SiGe buffer layers currently being developed by professors Steven Ringell of Ohio State University and Eugene Fitzgerald of MIT. Potential markets are similar to those currently occupied by high efficiency multi-junction space solar cells grown on a Germanium substrate. Initial cost analysis shows that at production volumes similar to those of the state of the art, cost could be reduced by a factor of' four. Significant market share may be gained in both the space and terrestrial PV markets due to improved performance associated with superior materials properties advantages as well as production cost reductions.by Zachary Steele Judkins.M.Eng

Regulation-Structured Dynamic Metabolic Model Provides a Potential Mechanism for Delayed Enzyme Response in Denitrification Process

In a recent study of denitrification dynamics in hyporheic zone sediments, we observed a significant time lag (up to several days) in enzymatic response to the changes in substrate concentration. To explore an underlying mechanism and understand the interactive dynamics between enzymes and nutrients, we developed a trait-based model that associates a community’s traits with functional enzymes, instead of typically used species guilds (or functional guilds). This enzyme-based formulation allows to collectively describe biogeochemical functions of microbial communities without directly parameterizing the dynamics of species guilds, therefore being scalable to complex communities. As a key component of modeling, we accounted for microbial regulation occurring through transcriptional and translational processes, the dynamics of which was parameterized based on the temporal profiles of enzyme concentrations measured using a new signature peptide-based method. The simulation results using the resulting model showed several days of a time lag in enzymatic responses as observed in experiments. Further, the model showed that the delayed enzymatic reactions could be primarily controlled by transcriptional responses and that the dynamics of transcripts and enzymes are closely correlated. The developed model can serve as a useful tool for predicting biogeochemical processes in natural environments, either independently or through integration with hydrologic flow simulators

Molecular analysis of sarcomeric and non-sarcomeric genes in patients with hypertrophic cardiomyopathy.

Background: Hypertrophic cardiomyopathy (HCM) is a common genetic heart disorder characterized by unexplained left ventricle hypertrophy associated with non-dilated ventricular chambers. Several genes encoding heart sarcomeric proteins have been associated to HCM, but a small proportion of HCM patients harbor alterations in other non-sarcomeric loci. The variable expression of HCM seems influenced by genetic modifier factors and new sequencing technologies are redefining the understanding of genotype–phenotype relationships, even if the interpretations of the numerous identified variants pose several challenges. Methods and results: We investigated 62 sarcomeric and non-sarcomeric genes in 41 HCM cases and in 3 HCM-related disorders patients. We employed an integrated approach that combines multiple tools for the prediction, annotation and visualization of functional variants. Genotype–phenotype correlations were carried out for inspecting the involvement of each gene in age onset and clinical variability of HCM. The 80% of the non-syndromic patients showed at least one rare non-synonymous variant (nsSNV) and among them, 58% carried alterations in sarcomeric loci, 14% in desmosomal and 7% in other non-sarcomeric ones without any sarcomere change. Statistical analyses revealed an inverse correlation between the number of nsSNVs and age at onset, and a relationship between the clinical variability and number and type of variants. Conclusions: Our results extend the mutational spectrum of HCM and contribute in defining the molecular pathogenesis and inheritance pattern(s) of this condition. Besides, we delineate a specific procedure for the identification of the most likely pathogenetic variants for a next generation sequencing approach embodied in a clinical context

Discovery Prospects for a Supernova Signature of Biogenic Origin

Approximately 2.8 Myr before the present our planet was subjected to the debris of a supernova explosion. The terrestrial proxy for this event was the discovery of live atoms of 60Fe in a deep-sea ferromanganese crust. The signature for this supernova event should also reside in magnetite Fe3O4 microfossils produced by magnetotactic bacteria extant at the time of the Earth-supernova interaction, provided the bacteria preferentially uptake iron from fine-grained iron oxides and ferric hydroxides. Using estimates for the terrestrial supernova 60Fe flux, combined with our empirically derived microfossil concentrations in a deep-sea drill core, we deduce a conservative estimate of the ^{60}{Fe} fraction as 60Fe/Fe ~ 3.6 x 10^{-15}. This value sits comfortably within the sensitivity limit of present accelerator mass spectrometry capabilities. The implication is that a biogenic signature of this cosmic event is detectable in the Earth's fossil record.Comment: As it appears in Icaru

O-GlcNAcase:promiscuous hexosaminidase or key regulator of O-GlcNAc signalling?

O-GlcNAc signaling is regulated by an opposing pair of enzymes: O-GlcNAc transferase installs and O-GlcNAcase (OGA) removes the modification from proteins. The dynamics and regulation of this process are only beginning to be understood as the physiological functions of both enzymes are being probed using genetic and pharmacological approaches. This minireview charts the discovery and functional and structural analysis of OGA and summarizes the insights gained from recent studies using OGA inhibition, gene knock-out, and overexpression. We identify several areas of “known unknowns” that would benefit from future research, such as the enigmatic C-terminal domain of OGA

Direct involvement of ombB, omaB, and omcB genes in extracellular reduction of Fe(III) by Geobacter sulfurreducens PCA

The tandem gene clusters orfR-ombB-omaB-omcB and orfS-ombC-omaC-omcC of the metal-reducing bacterium Geobacter sulfurreducens PCA are responsible for trans-outer membrane electron transfer during extracellular reduction of Fe(III)-citrate and ferrihydrite [a poorly crystalline Fe(III) oxide]. Each gene cluster encodes a putative transcriptional factor (OrfR/OrfS), a porin-like outer-membrane protein (OmbB/OmbC), a periplasmic c-type cytochrome (c-Cyt, OmaB/OmaC) and an outer-membrane c-Cyt (OmcB/OmcC). The individual roles of OmbB, OmaB and OmcB in extracellular reduction of Fe(III), however, have remained either uninvestigated or controversial. Here, we showed that replacements of ombB, omaB, omcB and ombB-omaB with an antibiotic gene in the presence of ombC-omaC-omcC had no impact on reduction of Fe(III)-citrate by G. sulfurreducens PCA. Disruption of ombB, omaB, omcB and ombB-omaB in the absence of ombC-omaC-omcC, however, severely impaired the bacterial ability to reduce Fe(III)-citrate as well as ferrihydrite. These results unequivocally demonstrate an overlapping role of ombB-omaB-omcB and ombC-omaC-omcC in extracellular Fe(III) reduction by G. sulfurreducens PCA. Involvement of both ombB-omaB-omcB and ombC-omaC-omcC in extracellular Fe(III) reduction reflects the importance of these trans-outer membrane protein complexes in the physiology of this bacterium. Moreover, the kinetics of Fe(III)-citrate and ferrihydrite reduction by these mutants in the absence of ombC-omaC-omcC were nearly identical, which suggests that absence of any protein subunit eliminates function of OmaB/OmbB/OmcB protein complex. Finally, orfS was found to have a negative impact on the extracellular reduction of Fe(III)-citrate and ferrihydrite in G. sulfurreducens PCA probably by serving as a transcriptional repressor