Time-lapse characterization of hydrothermal seawater and microbial interactions with basaltic tephra at Surtsey Volcano

A new International Continental Drilling Program (ICDP) project will drill through the 50-yearoldedifice of Surtsey Volcano, the youngest of the Vestmannaeyjar Islands along the south coast of Iceland, to perform interdisciplinary time-lapse investigations of hydrothermal and microbial interactions with basaltic tephra. The volcano, created in 1963–1967 by submarine and subaerial basaltic eruptions, was first drilled in 1979. In October 2014, a workshop funded by the ICDP convened 24 scientists from 10 countries for 3 and a half days on Heimaey Island to develop scientific objectives, site the drill holes, and organize logistical support. Representatives of the Surtsey Research Society and Environment Agency of Iceland also participated. Scientific themes focus on further determinations of the structure and eruptive processes of the type locality of Surtseyan volcanism, descriptions of changes in fluid geochemistry and microbial colonization of the subterrestrial deposits since drilling 35 years ago, and monitoring the evolution of hydrothermal and biological processes within the tephra deposits far into the future through the installation of a Surtsey subsurface observatory. The tephra deposits provide a geologic analog for developing specialty concretes with pyroclastic rock and evaluating their long-term performance under diverse hydrothermal conditions

SUSTAIN drilling at Surtsey volcano, Iceland, tracks hydrothermal and microbiological interactions in basalt 50 years after eruption

The 2017 Surtsey Underwater volcanic System for Thermophiles, Alteration processes and INnovative concretes (SUSTAIN) drilling project at Surtsey volcano, sponsored in part by the International Continental Scientific Drilling Program (ICDP), provides precise observations of the hydrothermal, geochemical, geomagnetic, and microbiological changes that have occurred in basaltic tephra and minor intrusions since explosive and effusive eruptions produced the oceanic island in 1963–1967. Two vertically cored boreholes, to 152 and 192 m below the surface, were drilled using filtered, UV-sterilized seawater circulating fluid to minimize microbial contamination. These cores parallel a 181 m core drilled in 1979. Introductory investigations indicate changes in material properties and whole-rock compositions over the past 38 years. A Surtsey subsurface observatory installed to 181 m in one vertical borehole holds incubation experiments that monitor in situ mineralogical and microbial alteration processes at 25–124 ∘C. A third cored borehole, inclined 55∘ in a 264∘ azimuthal direction to 354 m measured depth, provides further insights into eruption processes, including the presence of a diatreme that extends at least 100 m into the seafloor beneath the Surtur crater. The SUSTAIN project provides the first time-lapse drilling record into a very young oceanic basaltic volcano over a range of temperatures, 25–141 ∘C from 1979 to 2017, and subaerial and submarine hydrothermal fluid compositions. Rigorous procedures undertaken during the drilling operation protected the sensitive environment of the Surtsey Natural Preserve

Controls on andesitic glaciovolcanism at ice-capped volcanoes from field and experimental studies

Glaciovolcanic deposits at Tongariro and Ruapehu volcanoes, New Zealand, represent diverse styles of interaction between wet-based glaciers and andesitic lava. There are ice-confined lavas, and also hydroclastic breccia and subaqueous pyroclastic deposits that formed during effusive and explosive eruptions into meltwater beneath the glacier; they are rare among globally reported products of andesitic glaciovolcanism. The apparent lack of hydrovolcanically fragmented andesite at ice-capped volcanoes has been attributed to a lack of meltwater at the interaction sites because either the thermal characteristics of andesite limit meltwater production or meltwater drains out through leaky glaciers and down steep volcano slopes. We used published field evidence and novel, dynamic andesite-ice experiments to show that, in some cases, meltwater accumulates under glaciers on andesitic volcanoes and that meltwater production rates increase as andesite pushes against an ice wall. We concur with models for eruptions beneath ice sheets showing that the glacial conditions and pre-eruption edifice morphology are more important controls on the style of glaciovolcanism and its products than magma composition and the thermal properties of magmas. Glaciovolcanic products can be useful proxies for paleoenvironment, and the range of andesitic products and the hydrological environments in which andesite erupts are greater than hitherto appreciated

Rapid injection of particles and gas into non-fluidized granular material, and some volcanological implications

In diatremes and other volcanic vents, steep bodies of volcaniclastic material having differing properties (particle size distribution, proportion of lithic fragments, etc.) from those of the surrounding vent-filling volcaniclastic material are often found. It has been proposed that cylindrical or cone-shaped bodies result from the passage of “debris jets” generated after phreatomagmatic explosions or other discrete subterranean bursts. To learn more about such phenomena, we model experimentally the injection of gas-particulate dispersions through other particles. Analogue materials (glass beads or sand) and a finite amount of compressed air are used in the laboratory. The gas is made available by rapidly opening a valve – therefore the injection of gas and coloured particles into a granular host is a brief (< 1 s), discrete event, comparable to what occurs in nature following subterranean explosions. The injection assumes a bubble shape while expanding and propagating upwards. In reaction, the upper part of the clastic host moves upward and outward above the ‘bubble’, forming a ‘dome’. The doming effect is much more pronounced for shallow injection depths (thin hosts), with dome angles reaching more than 45°. Significant surface doming is also observed for some full-scale subterranean blasts (e.g. buried nuclear explosions), so it is not an artefact of our setup. What happens next in the experiments depends on the depth of injection and the nature of the host material. With shallow injection into a permeable host (glass beads), the compressed air in the “bubble’ is able to diffuse rapidly through the roof. Meanwhile the coloured beads sediment into the transient cavity, which is also closing laterally because of inward-directed granular flow of the host. Depending on the initial gas pressure in the reservoir, the two-phase flow can “erupt” or not; non-erupting injections produce cylindrical bodies of coloured beads whereas erupting runs produce flaring upward or conical deposits. Changing the particle size of the host glass beads does not have a large effect under the size range investigated (100-200 to 300-400 µm). Doubling the host thickness (injection depth) requires a doubling of the initial gas pressure to produce similar phenomena. Such injections – whether erupting or wholly subterranean – provide a compelling explanation for the origin and characteristics of multiple cross-cutting bodies that have been documented for diatreme and other vent deposits

Volcanic jets, plumes, and collapsing fountains: evidence from large-scale experiments, with particular emphasis on the entrainment rate

The source conditions of volcanic plumes and collapsing fountains are investigated by means of large-scale experiments. In the experiments, gas-particle jets issuing from a cylindrical conduit are forced into the atmosphere at different mass flow rates. Dense jets (high particle volumetric concentration, e.g., C 0 > 0.01) generate collapsing fountains, whose height scales with the squared exit velocity. This is consistent with Bernoulli's equation, which is a good approximation if air entrainment is negligible. In this case, kinetic energy is transformed into potential energy without any significant loss by friction with the atmosphere. The dense collapsing fountain, on hitting the ground, generates an intense shear flow similar to a pyroclastic density current. Dilute hot jets (low particle volumetric concentration, e.g., C 0 3). © 2014 Springer-Verlag Berlin Heidelberg

Multiphase flow above explosion sites in debris-filled volcanic vents: insights from analogue experiments

Discrete explosive bursts are known from many volcanic eruptions. In maar-diatreme eruptions, they have occurred in debris-filled volcanic vents when magma interacted with groundwater, implying that material mobilized by such explosions passed through the overlying and enclosing debris to reach the surface. Although other studies have addressed the form and characteristics of craters formed by discrete explosions in unconsolidated material, no details are available regarding the structure of the disturbed debris between the explosion site and the surface. Field studies of diatreme deposits reveal cross-cutting, steep-sided zones of non-bedded volcaniclastic material that have been inferred to result from sedimentation of material transported by "debris jets" driven by explosions. In order to determine the general processes and deposit geometry resulting from discrete, explosive injections of entrained particles through a particulate host, we ran a series of analogue experiments. Specific volumes of compressed (0.5-2.5 MPa) air were released in bursts that drove gas-particle dispersions through a granular host. The air expanded into and entrained coloured particles in a small crucible before moving upward into the host (white particles). Each burst drove into the host an expanding cavity containing air and coloured particles. Total duration of each run, recorded with high-speed video, was approximately 0.5-1 second. The coloured beads sedimented into the transient cavity. This same behaviour was observed even in runs where there was no breaching of the surface, and no coloured beads ejected. A steep-sided body of coloured beads was left that is similar to the cross-cutting pipes observed in deposits filling real volcanic vents, in which cavity collapse can result not only from gas escape through a granular host as in the experiments, but also through condensation of water vapour. A key conclusion from these experiments is that the geometry of cross-cutting volcaniclastic deposits in volcanic vents is not directly informative of the geometry of the "intrusions" that formed them. An additional conclusion is that complex structures can form quickly from discrete events

Conduit flow experiments help constraining the regime of explosive eruptions

It is currently impractical to measure what happens in a volcano during an explosive eruption, and up to now much of our knowledge depends on theoretical models. Here we show, by means of large‐scale experiments, that the regime of explosive events can be constrained on the basis of the characteristics of magma at the point of fragmentation and conduit geometry. Our model, whose results are consistent with the literature, is a simple tool for defining the conditions at conduit exit that control the most hazardous volcanic regimes. Besides the well‐known convective plume regime, which generates pyroclastic fallout, and the vertically collapsing column regime, which leads to pyroclastic flows, we introduce an additional regime of radially expanding columns, which form when the eruptive gas‐particle mixture exits from the vent at overpressure with respect to atmosphere. As a consequence of the radial expansion, a dilute collapse occurs, which favors the formation of density currents resembling natural base surges. We conclude that a quantitative knowledge of magma fragmentation, i.e., particle size, fragmentation energy, and fragmentation speed, is critical for determining the eruption regime.Research was partially funded by DPC-INGV agreement 07‐09 and MUR PRIN 06.PublishedB042043.6. Fisica del vulcanismoJCR Journalrestricte